White space and typo fixes. This makes it easier to compare the s2895 & s2892.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4773 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

6 files changed, 512 insertions, 547 deletions

diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc
index 50b78d0c92..5641682b37 100644
--- a/src/cpu/amd/car/cache_as_ram.inc
+++ b/src/cpu/amd/car/cache_as_ram.inc
@@ -250,7 +250,6 @@ clear_fixed_var_mtrr_out:
 	wrmsr
 #endif /*  CONFIG_USE_FAILOVER_IMAGE == 1*/
 
-
 #if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 0)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 0))
 	/* disable cache */
 	movl	%cr0, %eax
@@ -300,7 +299,6 @@ wbcache_post_fam10_setup:
 	andl	$0x9fffffff, %eax
 	movl	%eax, %cr0
 
-
 	jmp_if_k8(fam10_end_part1)
 
 	/* So we need to check if it is BSP */
diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
index 92698308e9..ffe11034d5 100644
--- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c
@@ -1,6 +1,12 @@
 #define ASSEMBLY 1
 #define __ROMCC__
 
+#define QRANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
 #include <stdint.h>
 #include <string.h>
 #include <device/pci_def.h>
@@ -10,6 +16,8 @@
 #include <cpu/x86/lapic.h>
 #include "option_table.h"
 #include "pc80/mc146818rtc_early.c"
+
+#define post_code(x) outb(x, 0x80)
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "lib/ramtest.c"
@@ -34,10 +42,6 @@
 
 #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
-static void memreset_setup(void)
-{
-}
-
 static void memreset(int controllers, const struct mem_controller *ctrl)
 {
 }
@@ -52,8 +56,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 	return smbus_read_byte(device, address);
 }
 
-#define QRANK_DIMM_SUPPORT 1
-
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "lib/generic_sdram.c"
@@ -61,9 +63,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
  /* tyan does not want the default */
 #include "resourcemap.c"
 
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
 #include "cpu/amd/dualcore/dualcore.c"
 
 #define CK804_NUM 1
@@ -108,11 +107,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	/* Is this a cpu only reset? or Is this a secondary cpu? */
 	if ((cpu_init_detectedx) || (!boot_cpu())) {
-	if (last_boot_normal_x) {
-	goto normal_image;
-	} else {
-	goto fallback_image;
-	}
+		if (last_boot_normal_x) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
 	}
 
 	/* Nothing special needs to be done to find bus 0 */
@@ -128,14 +127,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
 	/* Is this a deliberate reset by the bios */
 //	post_code(0x22);
 	if (bios_reset_detected() && last_boot_normal_x) {
-	goto normal_image;
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-	goto normal_image;
+		goto normal_image;
 	}
 	else {
-	goto fallback_image;
+		goto fallback_image;
 	}
  normal_image:
 //	post_code(0x23);
@@ -178,7 +177,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	unsigned nodes;
 
 	if (bist == 0) {
-		init_cpus(cpu_init_detectedx);
+		bsp_apicid = init_cpus(cpu_init_detectedx);
 	}
 
 //	post_code(0x32);
@@ -190,11 +189,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
 
-	setup_s2892_resource_map();
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 0));
-	dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
+	setup_mb_resource_map();
 
 	needs_reset = setup_coherent_ht_domain();
 
@@ -210,7 +205,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	needs_reset |= ck804_early_setup_x();
 
 	if (needs_reset) {
-		print_info("ht reset -\r\n");
+		printk_info("ht reset -\n");
 		soft_reset();
 	}
 
@@ -221,23 +216,8 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	fill_mem_ctrl(nodes, ctrl, spd_addr);
 
 	enable_smbus();
-#if 0
-	dump_spd_registers(&cpu[0]);
-#endif
-#if 0
-	dump_smbus_registers();
-#endif
 
-	memreset_setup();
 	sdram_initialize(nodes, ctrl);
 
-#if 0
-	print_pci_devices();
-#endif
-
-#if 0
-	dump_pci_devices();
-#endif
-
 	post_cache_as_ram();
 }
diff --git a/src/mainboard/tyan/s2892/resourcemap.c b/src/mainboard/tyan/s2892/resourcemap.c
index 53482cc33e..61bead2d67 100644
--- a/src/mainboard/tyan/s2892/resourcemap.c
+++ b/src/mainboard/tyan/s2892/resourcemap.c
@@ -3,264 +3,261 @@
  *
  */
 
-static void setup_s2892_resource_map(void)
+static void setup_mb_resource_map(void)
 {
 	static const unsigned int register_values[] = {
-		/* Careful set limit registers before base registers which contain the enables */
-		/* DRAM Limit i Registers
-		 * F1:0x44 i = 0
-		 * F1:0x4C i = 1
-		 * F1:0x54 i = 2
-		 * F1:0x5C i = 3
-		 * F1:0x64 i = 4
-		 * F1:0x6C i = 5
-		 * F1:0x74 i = 6
-		 * F1:0x7C i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 3] Reserved
-		 * [10: 8] Interleave select
-		 *	   specifies the values of A[14:12] to use with interleave enable.
-		 * [15:11] Reserved
-		 * [31:16] DRAM Limit Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40 bit  address
-		 *	   that define the end of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
-		/* DRAM Base i Registers
-		 * F1:0x40 i = 0
-		 * F1:0x48 i = 1
-		 * F1:0x50 i = 2
-		 * F1:0x58 i = 3
-		 * F1:0x60 i = 4
-		 * F1:0x68 i = 5
-		 * F1:0x70 i = 6
-		 * F1:0x78 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 7: 2] Reserved
-		 * [10: 8] Interleave Enable
-		 *	   000 = No interleave
-		 *	   001 = Interleave on A[12] (2 nodes)
-		 *	   010 = reserved
-		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-		 *	   100 = reserved
-		 *	   101 = reserved
-		 *	   110 = reserved
-		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-		 * [15:11] Reserved
-		 * [13:16] DRAM Base Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40-bit address
-		 *	   that define the start of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+	/* Careful set limit registers before base registers which contain the enables */
+	/* DRAM Limit i Registers
+	 * F1:0x44 i = 0
+	 * F1:0x4C i = 1
+	 * F1:0x54 i = 2
+	 * F1:0x5C i = 3
+	 * F1:0x64 i = 4
+	 * F1:0x6C i = 5
+	 * F1:0x74 i = 6
+	 * F1:0x7C i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 3] Reserved
+	 * [10: 8] Interleave select
+	 *	   specifies the values of A[14:12] to use with interleave enable.
+	 * [15:11] Reserved
+	 * [31:16] DRAM Limit Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40 bit  address
+	 *	   that define the end of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+	/* DRAM Base i Registers
+	 * F1:0x40 i = 0
+	 * F1:0x48 i = 1
+	 * F1:0x50 i = 2
+	 * F1:0x58 i = 3
+	 * F1:0x60 i = 4
+	 * F1:0x68 i = 5
+	 * F1:0x70 i = 6
+	 * F1:0x78 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 7: 2] Reserved
+	 * [10: 8] Interleave Enable
+	 *	   000 = No interleave
+	 *	   001 = Interleave on A[12] (2 nodes)
+	 *	   010 = reserved
+	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+	 *	   100 = reserved
+	 *	   101 = reserved
+	 *	   110 = reserved
+	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+	 * [15:11] Reserved
+	 * [13:16] DRAM Base Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40-bit address
+	 *	   that define the start of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
 
-		/* Memory-Mapped I/O Limit i Registers
-		 * F1:0x84 i = 0
-		 * F1:0x8C i = 1
-		 * F1:0x94 i = 2
-		 * F1:0x9C i = 3
-		 * F1:0xA4 i = 4
-		 * F1:0xAC i = 5
-		 * F1:0xB4 i = 6
-		 * F1:0xBC i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = Reserved
-		 * [ 6: 6] Reserved
-		 * [ 7: 7] Non-Posted
-		 *	   0 = CPU writes may be posted
-		 *	   1 = CPU writes must be non-posted
-		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-		 *	   This field defines the upp adddress bits of a 40-bit address that
-		 *	   defines the end of a memory-mapped I/O region n
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+	/* Memory-Mapped I/O Limit i Registers
+	 * F1:0x84 i = 0
+	 * F1:0x8C i = 1
+	 * F1:0x94 i = 2
+	 * F1:0x9C i = 3
+	 * F1:0xA4 i = 4
+	 * F1:0xAC i = 5
+	 * F1:0xB4 i = 6
+	 * F1:0xBC i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = Reserved
+	 * [ 6: 6] Reserved
+	 * [ 7: 7] Non-Posted
+	 *	   0 = CPU writes may be posted
+	 *	   1 = CPU writes must be non-posted
+	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+	 *	   This field defines the upp adddress bits of a 40-bit address that
+	 *	   defines the end of a memory-mapped I/O region n
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+//	PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
 
-		/* Memory-Mapped I/O Base i Registers
-		 * F1:0x80 i = 0
-		 * F1:0x88 i = 1
-		 * F1:0x90 i = 2
-		 * F1:0x98 i = 3
-		 * F1:0xA0 i = 4
-		 * F1:0xA8 i = 5
-		 * F1:0xB0 i = 6
-		 * F1:0xB8 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Cpu Disable
-		 *	   0 = Cpu can use this I/O range
-		 *	   1 = Cpu requests do not use this I/O range
-		 * [ 3: 3] Lock
-		 *	   0 = base/limit registers i are read/write
-		 *	   1 = base/limit registers i are read-only
-		 * [ 7: 4] Reserved
-		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-		 *	   This field defines the upper address bits of a 40bit address 
-		 *	   that defines the start of memory-mapped I/O region i
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+	/* Memory-Mapped I/O Base i Registers
+	 * F1:0x80 i = 0
+	 * F1:0x88 i = 1
+	 * F1:0x90 i = 2
+	 * F1:0x98 i = 3
+	 * F1:0xA0 i = 4
+	 * F1:0xA8 i = 5
+	 * F1:0xB0 i = 6
+	 * F1:0xB8 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Cpu Disable
+	 *	   0 = Cpu can use this I/O range
+	 *	   1 = Cpu requests do not use this I/O range
+	 * [ 3: 3] Lock
+	 *	   0 = base/limit registers i are read/write
+	 *	   1 = base/limit registers i are read-only
+	 * [ 7: 4] Reserved
+	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+	 *	   This field defines the upper address bits of a 40bit address
+	 *	   that defines the start of memory-mapped I/O region i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+//	PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
 
-		/* PCI I/O Limit i Registers
-		 * F1:0xC4 i = 0
-		 * F1:0xCC i = 1
-		 * F1:0xD4 i = 2
-		 * F1:0xDC i = 3
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = reserved
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Limit Address i
-		 *	   This field defines the end of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
-		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, 
-		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+	/* PCI I/O Limit i Registers
+	 * F1:0xC4 i = 0
+	 * F1:0xCC i = 1
+	 * F1:0xD4 i = 2
+	 * F1:0xDC i = 3
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = reserved
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Limit Address i
+	 *	   This field defines the end of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+	PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
 
-		/* PCI I/O Base i Registers
-		 * F1:0xC0 i = 0
-		 * F1:0xC8 i = 1
-		 * F1:0xD0 i = 2
-		 * F1:0xD8 i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 3: 2] Reserved
-		 * [ 4: 4] VGA Enable
-		 *	   0 = VGA matches Disabled
-		 *	   1 = matches all address < 64K and where A[9:0] is in the 
-		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-		 * [ 5: 5] ISA Enable
-		 *	   0 = ISA matches Disabled
-		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-		 *	       from matching agains this base/limit pair
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Base i
-		 *	   This field defines the start of PCI I/O region n 
-		 * [31:25] Reserved
-		 */
-		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
-		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
-		/* Config Base and Limit i Registers
-		 * F1:0xE0 i = 0
-		 * F1:0xE4 i = 1
-		 * F1:0xE8 i = 2
-		 * F1:0xEC i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Device Number Compare Enable
-		 *	   0 = The ranges are based on bus number
-		 *	   1 = The ranges are ranges of devices on bus 0
-		 * [ 3: 3] Reserved
-		 * [ 6: 4] Destination Node
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 7] Reserved
-		 * [ 9: 8] Destination Link
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 - Reserved
-		 * [15:10] Reserved
-		 * [23:16] Bus Number Base i
-		 *	   This field defines the lowest bus number in configuration region i
-		 * [31:24] Bus Number Limit i
-		 *	   This field defines the highest bus number in configuration region i
-		 */
-//		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
-//		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
-		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, 
-		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, 
+	/* PCI I/O Base i Registers
+	 * F1:0xC0 i = 0
+	 * F1:0xC8 i = 1
+	 * F1:0xD0 i = 2
+	 * F1:0xD8 i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 3: 2] Reserved
+	 * [ 4: 4] VGA Enable
+	 *	   0 = VGA matches Disabled
+	 *	   1 = matches all address < 64K and where A[9:0] is in the
+	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+	 * [ 5: 5] ISA Enable
+	 *	   0 = ISA matches Disabled
+	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+	 *	       from matching agains this base/limit pair
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Base i
+	 *	   This field defines the start of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+	PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
 
+	/* Config Base and Limit i Registers
+	 * F1:0xE0 i = 0
+	 * F1:0xE4 i = 1
+	 * F1:0xE8 i = 2
+	 * F1:0xEC i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Device Number Compare Enable
+	 *	   0 = The ranges are based on bus number
+	 *	   1 = The ranges are ranges of devices on bus 0
+	 * [ 3: 3] Reserved
+	 * [ 6: 4] Destination Node
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 7] Reserved
+	 * [ 9: 8] Destination Link
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 - Reserved
+	 * [15:10] Reserved
+	 * [23:16] Bus Number Base i
+	 *	   This field defines the lowest bus number in configuration region i
+	 * [31:24] Bus Number Limit i
+	 *	   This field defines the highest bus number in configuration region i
+	 */
+//	PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
+//	PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
+	PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
 	};
-
 	int max;
 	max = ARRAY_SIZE(register_values);
 	setup_resource_map(register_values, max);
 }
-
diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
index a15dc0b184..0e144eb29c 100644
--- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c
@@ -4,7 +4,6 @@
 #define K8_ALLOCATE_IO_RANGE 1
 //#define K8_SCAN_PCI_BUS 1
 
-//used by raminit
 #define QRANK_DIMM_SUPPORT 1
 
 #if CONFIG_LOGICAL_CPUS==1
@@ -112,7 +111,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 #include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
 
 #include "cpu/amd/car/copy_and_run.c"
-
 #include "cpu/amd/car/post_cache_as_ram.c"
 
 #include "cpu/amd/model_fxx/init_cpus.c"
@@ -259,10 +257,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	sio_gpio_setup();
 
 	setup_mb_resource_map();
-#if 0
-	dump_pci_device(PCI_DEV(0, 0x18, 0));
-	dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
 
 	needs_reset = setup_coherent_ht_domain();
 
@@ -278,7 +272,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	needs_reset |= ck804_early_setup_x();
 
 	if (needs_reset) {
-		printk_info("ht reset -\r\n");
+		printk_info("ht reset -\n");
 		soft_reset();
 	}
 
diff --git a/src/mainboard/tyan/s2895/resourcemap.c b/src/mainboard/tyan/s2895/resourcemap.c
index aed892acf1..8d2088369d 100644
--- a/src/mainboard/tyan/s2895/resourcemap.c
+++ b/src/mainboard/tyan/s2895/resourcemap.c
@@ -6,262 +6,258 @@
 static void setup_mb_resource_map(void)
 {
 	static const unsigned int register_values[] = {
-		/* Careful set limit registers before base registers which contain the enables */
-		/* DRAM Limit i Registers
-		 * F1:0x44 i = 0
-		 * F1:0x4C i = 1
-		 * F1:0x54 i = 2
-		 * F1:0x5C i = 3
-		 * F1:0x64 i = 4
-		 * F1:0x6C i = 5
-		 * F1:0x74 i = 6
-		 * F1:0x7C i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 3] Reserved
-		 * [10: 8] Interleave select
-		 *	   specifies the values of A[14:12] to use with interleave enable.
-		 * [15:11] Reserved
-		 * [31:16] DRAM Limit Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40 bit  address
-		 *	   that define the end of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+	/* Careful set limit registers before base registers which contain the enables */
+	/* DRAM Limit i Registers
+	 * F1:0x44 i = 0
+	 * F1:0x4C i = 1
+	 * F1:0x54 i = 2
+	 * F1:0x5C i = 3
+	 * F1:0x64 i = 4
+	 * F1:0x6C i = 5
+	 * F1:0x74 i = 6
+	 * F1:0x7C i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 3] Reserved
+	 * [10: 8] Interleave select
+	 *	   specifies the values of A[14:12] to use with interleave enable.
+	 * [15:11] Reserved
+	 * [31:16] DRAM Limit Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40 bit  address
+	 *	   that define the end of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+	/* DRAM Base i Registers
+	 * F1:0x40 i = 0
+	 * F1:0x48 i = 1
+	 * F1:0x50 i = 2
+	 * F1:0x58 i = 3
+	 * F1:0x60 i = 4
+	 * F1:0x68 i = 5
+	 * F1:0x70 i = 6
+	 * F1:0x78 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 7: 2] Reserved
+	 * [10: 8] Interleave Enable
+	 *	   000 = No interleave
+	 *	   001 = Interleave on A[12] (2 nodes)
+	 *	   010 = reserved
+	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+	 *	   100 = reserved
+	 *	   101 = reserved
+	 *	   110 = reserved
+	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+	 * [15:11] Reserved
+	 * [13:16] DRAM Base Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40-bit address
+	 *	   that define the start of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
 
-		/* DRAM Base i Registers
-		 * F1:0x40 i = 0
-		 * F1:0x48 i = 1
-		 * F1:0x50 i = 2
-		 * F1:0x58 i = 3
-		 * F1:0x60 i = 4
-		 * F1:0x68 i = 5
-		 * F1:0x70 i = 6
-		 * F1:0x78 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 7: 2] Reserved
-		 * [10: 8] Interleave Enable
-		 *	   000 = No interleave
-		 *	   001 = Interleave on A[12] (2 nodes)
-		 *	   010 = reserved
-		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
-		 *	   100 = reserved
-		 *	   101 = reserved
-		 *	   110 = reserved
-		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
-		 * [15:11] Reserved
-		 * [13:16] DRAM Base Address i Bits 39-24
-		 *	   This field defines the upper address bits of a 40-bit address
-		 *	   that define the start of the DRAM region.
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+	/* Memory-Mapped I/O Limit i Registers
+	 * F1:0x84 i = 0
+	 * F1:0x8C i = 1
+	 * F1:0x94 i = 2
+	 * F1:0x9C i = 3
+	 * F1:0xA4 i = 4
+	 * F1:0xAC i = 5
+	 * F1:0xB4 i = 6
+	 * F1:0xBC i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = Reserved
+	 * [ 6: 6] Reserved
+	 * [ 7: 7] Non-Posted
+	 *	   0 = CPU writes may be posted
+	 *	   1 = CPU writes must be non-posted
+	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+	 *	   This field defines the upp adddress bits of a 40-bit address that
+	 *	   defines the end of a memory-mapped I/O region n
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+//	PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
 
-		/* Memory-Mapped I/O Limit i Registers
-		 * F1:0x84 i = 0
-		 * F1:0x8C i = 1
-		 * F1:0x94 i = 2
-		 * F1:0x9C i = 3
-		 * F1:0xA4 i = 4
-		 * F1:0xAC i = 5
-		 * F1:0xB4 i = 6
-		 * F1:0xBC i = 7
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = Reserved
-		 * [ 6: 6] Reserved
-		 * [ 7: 7] Non-Posted
-		 *	   0 = CPU writes may be posted
-		 *	   1 = CPU writes must be non-posted
-		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
-		 *	   This field defines the upp adddress bits of a 40-bit address that
-		 *	   defines the end of a memory-mapped I/O region n
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+	/* Memory-Mapped I/O Base i Registers
+	 * F1:0x80 i = 0
+	 * F1:0x88 i = 1
+	 * F1:0x90 i = 2
+	 * F1:0x98 i = 3
+	 * F1:0xA0 i = 4
+	 * F1:0xA8 i = 5
+	 * F1:0xB0 i = 6
+	 * F1:0xB8 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Cpu Disable
+	 *	   0 = Cpu can use this I/O range
+	 *	   1 = Cpu requests do not use this I/O range
+	 * [ 3: 3] Lock
+	 *	   0 = base/limit registers i are read/write
+	 *	   1 = base/limit registers i are read-only
+	 * [ 7: 4] Reserved
+	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+	 *	   This field defines the upper address bits of a 40bit address
+	 *	   that defines the start of memory-mapped I/O region i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+//	PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
 
-		/* Memory-Mapped I/O Base i Registers
-		 * F1:0x80 i = 0
-		 * F1:0x88 i = 1
-		 * F1:0x90 i = 2
-		 * F1:0x98 i = 3
-		 * F1:0xA0 i = 4
-		 * F1:0xA8 i = 5
-		 * F1:0xB0 i = 6
-		 * F1:0xB8 i = 7
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Cpu Disable
-		 *	   0 = Cpu can use this I/O range
-		 *	   1 = Cpu requests do not use this I/O range
-		 * [ 3: 3] Lock
-		 *	   0 = base/limit registers i are read/write
-		 *	   1 = base/limit registers i are read-only
-		 * [ 7: 4] Reserved
-		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
-		 *	   This field defines the upper address bits of a 40bit address 
-		 *	   that defines the start of memory-mapped I/O region i
-		 */
-		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-//		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+	/* PCI I/O Limit i Registers
+	 * F1:0xC4 i = 0
+	 * F1:0xCC i = 1
+	 * F1:0xD4 i = 2
+	 * F1:0xDC i = 3
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = reserved
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Limit Address i
+	 *	   This field defines the end of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
+	PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, // need to talk to ANALOG of second CK804 to release PCI E reset
+	PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
 
-		/* PCI I/O Limit i Registers
-		 * F1:0xC4 i = 0
-		 * F1:0xCC i = 1
-		 * F1:0xD4 i = 2
-		 * F1:0xDC i = 3
-		 * [ 2: 0] Destination Node ID
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 3: 3] Reserved
-		 * [ 5: 4] Destination Link ID
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 = reserved
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Limit Address i
-		 *	   This field defines the end of PCI I/O region n
-		 * [31:25] Reserved
-		 */
-		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
-		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, // need to talk to ANALOG of second CK804 to release PCI E reset
-		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
-		/* PCI I/O Base i Registers
-		 * F1:0xC0 i = 0
-		 * F1:0xC8 i = 1
-		 * F1:0xD0 i = 2
-		 * F1:0xD8 i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 3: 2] Reserved
-		 * [ 4: 4] VGA Enable
-		 *	   0 = VGA matches Disabled
-		 *	   1 = matches all address < 64K and where A[9:0] is in the 
-		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
-		 * [ 5: 5] ISA Enable
-		 *	   0 = ISA matches Disabled
-		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
-		 *	       from matching agains this base/limit pair
-		 * [11: 6] Reserved
-		 * [24:12] PCI I/O Base i
-		 *	   This field defines the start of PCI I/O region n 
-		 * [31:25] Reserved
-		 */
-		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
-		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033,
-		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
-		/* Config Base and Limit i Registers
-		 * F1:0xE0 i = 0
-		 * F1:0xE4 i = 1
-		 * F1:0xE8 i = 2
-		 * F1:0xEC i = 3
-		 * [ 0: 0] Read Enable
-		 *	   0 = Reads Disabled
-		 *	   1 = Reads Enabled
-		 * [ 1: 1] Write Enable
-		 *	   0 = Writes Disabled
-		 *	   1 = Writes Enabled
-		 * [ 2: 2] Device Number Compare Enable
-		 *	   0 = The ranges are based on bus number
-		 *	   1 = The ranges are ranges of devices on bus 0
-		 * [ 3: 3] Reserved
-		 * [ 6: 4] Destination Node
-		 *	   000 = Node 0
-		 *	   001 = Node 1
-		 *	   010 = Node 2
-		 *	   011 = Node 3
-		 *	   100 = Node 4
-		 *	   101 = Node 5
-		 *	   110 = Node 6
-		 *	   111 = Node 7
-		 * [ 7: 7] Reserved
-		 * [ 9: 8] Destination Link
-		 *	   00 = Link 0
-		 *	   01 = Link 1
-		 *	   10 = Link 2
-		 *	   11 - Reserved
-		 * [15:10] Reserved
-		 * [23:16] Bus Number Base i
-		 *	   This field defines the lowest bus number in configuration region i
-		 * [31:24] Bus Number Limit i
-		 *	   This field defines the highest bus number in configuration region i
-		 */
-		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
-		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
-		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, /* link 0 of cpu 1 --> Nvidia CK 804 Slave 	*/
-		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, /*113 link 1 of cpu 1 --> HT connector */
+	/* PCI I/O Base i Registers
+	 * F1:0xC0 i = 0
+	 * F1:0xC8 i = 1
+	 * F1:0xD0 i = 2
+	 * F1:0xD8 i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 3: 2] Reserved
+	 * [ 4: 4] VGA Enable
+	 *	   0 = VGA matches Disabled
+	 *	   1 = matches all address < 64K and where A[9:0] is in the
+	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+	 * [ 5: 5] ISA Enable
+	 *	   0 = ISA matches Disabled
+	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+	 *	       from matching agains this base/limit pair
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Base i
+	 *	   This field defines the start of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+	PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033,
+	PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
 
+	/* Config Base and Limit i Registers
+	 * F1:0xE0 i = 0
+	 * F1:0xE4 i = 1
+	 * F1:0xE8 i = 2
+	 * F1:0xEC i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Device Number Compare Enable
+	 *	   0 = The ranges are based on bus number
+	 *	   1 = The ranges are ranges of devices on bus 0
+	 * [ 3: 3] Reserved
+	 * [ 6: 4] Destination Node
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 7] Reserved
+	 * [ 9: 8] Destination Link
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 - Reserved
+	 * [15:10] Reserved
+	 * [23:16] Bus Number Base i
+	 *	   This field defines the lowest bus number in configuration region i
+	 * [31:24] Bus Number Limit i
+	 *	   This field defines the highest bus number in configuration region i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */
+	PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 	*/
+	PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, /* link 0 of cpu 1 --> Nvidia CK 804 Slave 	*/
+	PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, /*113 link 1 of cpu 1 --> HT connector */
 	};
-
 	int max;
 	max = ARRAY_SIZE(register_values);
 	setup_resource_map(register_values, max);
 }
-
diff --git a/src/northbridge/amd/amdk8/resourcemap.c b/src/northbridge/amd/amdk8/resourcemap.c
index 0bae190a73..ccb36745de 100644
--- a/src/northbridge/amd/amdk8/resourcemap.c
+++ b/src/northbridge/amd/amdk8/resourcemap.c
@@ -245,7 +245,7 @@ static void setup_default_resource_map(void)
 	 * [23:16] Bus Number Base i
 	 *	   This field defines the lowest bus number in configuration region i
 	 * [31:24] Bus Number Limit i
-	 *	   This field defines the highest bus number in configuration regin i
+	 *	   This field defines the highest bus number in configuration region i
 	 */
 	PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
 	PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,