baytrail: add support for routing gpio pins to smi/sci

In order for gpio pins to trigger an smi/sci the GPIO_ROUT
register needs to be set accordingly. For SMI, the ALT_GPIO_SMI
register needs to be enabled for each gpio as well.

The first 8 gpios from the suspend and core well are the only gpios
that can trigger an SMI or SCI. The settings for the GPIO_ROUT
and ALT_GPIO_SMI register are not commited until the SMM settings
are enabled in the southcluster.

BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Manually triggered SCI by changing GPE0a_EN
     and toggling PCH_WAKE_L on the EC console.

Change-Id: Id79b70084edc39fc047475e984494c224bd75d6d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176390
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4957
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

5 files changed, 93 insertions, 1 deletions

diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h
index 8d7925b32b..8c90c89d26 100644
--- a/src/soc/intel/baytrail/baytrail/gpio.h
+++ b/src/soc/intel/baytrail/baytrail/gpio.h
@@ -204,6 +204,25 @@
 #define GPIO_FUNC5		GPIO_FUNC(5, PULL_DISABLE, 10K)
 #define GPIO_FUNC6		GPIO_FUNC(6, PULL_DISABLE, 10K)
 
+/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
+ * triggered. */
+#define GPIO_ACPI_SCI \
+	{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
+	  .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+	  .pad_val   = PAD_VAL_INPUT_ENABLE, \
+	  .use_sel   = GPIO_USE_LEGACY, \
+	  .io_sel    = GPIO_DIR_INPUT, \
+	  .tne       = 1, \
+	  .wake_en   = 1, }
+#define GPIO_ACPI_SMI \
+	{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
+	  .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+	  .pad_val   = PAD_VAL_INPUT_ENABLE, \
+	  .use_sel   = GPIO_USE_LEGACY, \
+	  .io_sel    = GPIO_DIR_INPUT, \
+	  .tne       = 1, \
+	  .smi       = 1}
+
 /* End marker */
 #define GPIO_LIST_END		0xffffffff
 
@@ -227,6 +246,7 @@ struct soc_gpio_map {
 	u8  tpe     : 1;
 	u8  tne     : 1;
 	u8  wake_en : 1;
+	u8  smi     : 1;
 } __attribute__ ((packed));
 
 struct soc_gpio_config {
diff --git a/src/soc/intel/baytrail/baytrail/pmc.h b/src/soc/intel/baytrail/baytrail/pmc.h
index 1a7588cc20..f314d1dd76 100644
--- a/src/soc/intel/baytrail/baytrail/pmc.h
+++ b/src/soc/intel/baytrail/baytrail/pmc.h
@@ -68,6 +68,11 @@
 #	define USH_SS_PHY_DIS	(1 << 2)
 #	define OTG_SS_PHY_DIS	(1 << 1)
 #	define SMBUS_DIS	(1 << 0)
+#define GPIO_ROUT	0x58
+#	define ROUTE_MASK	3
+#	define ROUTE_NONE	0
+#	define ROUTE_SMI	1
+#	define ROUTE_SCI	2
 
 /* IO Mapped registers behind ACPI_BASE_ADDRESS */
 #define PM1_STS			0x00
diff --git a/src/soc/intel/baytrail/baytrail/smm.h b/src/soc/intel/baytrail/baytrail/smm.h
index 19a0695df8..e00944d520 100644
--- a/src/soc/intel/baytrail/baytrail/smm.h
+++ b/src/soc/intel/baytrail/baytrail/smm.h
@@ -34,8 +34,10 @@ static inline int smm_region_size(void)
 void *smm_region_start(void);
 
 #if !defined(__PRE_RAM__) && !defined(__SMM___)
+#include <stdint.h>
 void southcluster_smm_clear_state(void);
 void southcluster_smm_enable_smi(void);
+void southcluster_smm_save_gpio_route(uint32_t route);
 #endif
 
 #endif /* _BAYTRAIL_SMM_H_ */
diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c
index 2916c999b6..824ed6560b 100644
--- a/src/soc/intel/baytrail/gpio.c
+++ b/src/soc/intel/baytrail/gpio.c
@@ -17,9 +17,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#include <baytrail/gpio.h>
 #include <device/pci.h>
 #include <console/console.h>
+#include <baytrail/gpio.h>
+#include <baytrail/pmc.h>
+#include <baytrail/smm.h>
 
 /* GPIO-to-Pad LUTs */
 static const u8 gpncore_gpio_to_pad[GPNCORE_COUNT] =
@@ -154,12 +156,36 @@ static void setup_gpios(const struct soc_gpio_map *gpios,
 		}
 }
 
+static void setup_gpio_route(const struct soc_gpio_map *sus,
+                             const struct soc_gpio_map *core)
+{
+	uint32_t route_reg = 0;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		/* SMI takes precedence and wake_en implies SCI. */
+		if (sus[i].smi) {
+			route_reg |= ROUTE_SMI << (2 * i);
+		} else if (sus[i].wake_en) {
+			route_reg |= ROUTE_SCI << (2 * i);
+		}
+
+		if (core[i].smi) {
+			route_reg |= ROUTE_SMI << (2 * (i + 8));
+		} else if (core[i].wake_en) {
+			route_reg |= ROUTE_SCI << (2 * (i + 8));
+		}
+	}
+	southcluster_smm_save_gpio_route(route_reg);
+}
+
 void setup_soc_gpios(struct soc_gpio_config *config)
 {
 	if (config) {
 		setup_gpios(config->ncore, &gpncore_bank);
 		setup_gpios(config->score, &gpscore_bank);
 		setup_gpios(config->ssus,  &gpssus_bank);
+		setup_gpio_route(config->ssus, config->score);
 	}
 }
 
diff --git a/src/soc/intel/baytrail/smm.c b/src/soc/intel/baytrail/smm.c
index 124f93be59..1ba6246596 100644
--- a/src/soc/intel/baytrail/smm.c
+++ b/src/soc/intel/baytrail/smm.c
@@ -27,9 +27,19 @@
 #include <cpu/x86/smm.h>
 #include <string.h>
 
+#include <baytrail/iomap.h>
 #include <baytrail/pmc.h>
 #include <baytrail/smm.h>
 
+/* Save the gpio route register. The settings are committed from
+ * southcluster_smm_enable_smi(). */
+static uint32_t gpio_route;
+
+void southcluster_smm_save_gpio_route(uint32_t route)
+{
+	gpio_route = route;
+}
+
 void southcluster_smm_clear_state(void)
 {
 	uint32_t smi_en;
@@ -53,13 +63,42 @@ void southcluster_smm_clear_state(void)
 	clear_gpe_status();
 }
 
+static void southcluster_smm_route_gpios(void)
+{
+	const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT;
+	const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
+	uint32_t alt_gpio_reg = 0;
+	uint32_t route_reg = gpio_route;
+	int i;
+
+	printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
+
+	/* Start the routing for the specific gpios. */
+	write32(gpio_rout, route_reg);
+
+	/* Enable SMIs for the gpios that are set to trigger the SMI. */
+	for (i = 0; i < 16; i++) {
+		if ((route_reg & ROUTE_MASK) == ROUTE_SMI) {
+			alt_gpio_reg |= (1 << i);
+		}
+		route_reg >>= 2;
+	}
+	printk(BIOS_DEBUG, "ALT_GPIO_SMI = %08x\n", alt_gpio_reg);
+
+	outl(alt_gpio_reg, alt_gpio_smi);
+}
+
 void southcluster_smm_enable_smi(void)
 {
+
 	printk(BIOS_DEBUG, "Enabling SMIs.\n");
 	/* Configure events */
 	enable_pm1(PWRBTN_EN | GBL_EN);
 	disable_gpe(PME_B0_EN);
 
+	/* Set up the GPIO route. */
+	southcluster_smm_route_gpios();
+
 	/* Enable SMI generation:
 	 *  - on TCO events
 	 *  - on APMC writes (io 0xb2)