google/gru: Tune USB 2.0 PHY to increase compatibility

When testing USB 2.0 compatibility with different kinds
of USB 2.0 devices on Kevin board, we find that some
USB HDDs (e.g. seagate SRD00F1 1TB HDD) and some smart
phones (e.g. galaxy A5 smart phone) can't be detected.
And according to the error log, this issue is related
to USB 2.0 PHY signal problem.

For the USB HDD, error log is:
[  592.557724] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[  592.847735] usb 5-1: new high-speed USB device number 3 using xhci-hcd
[  593.473720] usb 5-1: new high-speed USB device number 6 using xhci-hcd
[  594.187717] usb 5-1: new high-speed USB device number 9 using xhci-hcd
[  595.020717] usb 5-1: new high-speed USB device number 13 using xhci-hcd
[  595.284730] usb 5-1: new high-speed USB device number 14 using xhci-hcd
[  595.574816] usb 5-1: new high-speed USB device number 15 using xhci-hcd

The log shows that HDD failed to high-speed handshake.

For the smart phone, error log is:
[ 1145.661625] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[ 1145.771674] usb 5-1: device descriptor read/64, error -71
[ 1145.979752] usb 5-1: device descriptor read/64, error -71
[ 1146.187721] usb 5-1: new high-speed USB device number 3 using xhci-hcd
[ 1146.301754] usb 5-1: device descriptor read/64, error -71
[ 1146.509750] usb 5-1: device descriptor read/64, error -71
[ 1146.717722] usb 5-1: new high-speed USB device number 4 using xhci-hcd
[ 1146.724393] usb 5-1: Device not responding to setup address.
[ 1146.930795] usb 5-1: Device not responding to setup address.
[ 1147.137720] usb 5-1: device not accepting address 4, error -71
[ 1147.246644] usb 5-1: new high-speed USB device number 5 using xhci-hcd
[ 1147.253336] usb 5-1: Device not responding to setup address.
[ 1147.459786] usb 5-1: Device not responding to setup address.
[ 1147.665712] usb 5-1: device not accepting address 5, error -71
[ 1147.671789] usb usb5-port1: unable to enumerate USB device

The log shows that smart phone failed to read device
descriptor, error -71 may be caused by PHY signal problem.

This patch aims to tune USB 2.0 PHY with the following
parameters to support USB HDD, smart phone and some other
potential USB 2.0 devices.

1. Disable the pre-emphasize in chirp state to avoid
   high-speed handshake failure.

2. Bypass ODT auto compensation to enable set max driver
   strength manually. (Bit[42] of usbphy_ctrl register is
   1'b1 for bypass, and Bit[41:37] of usbphy_ctrl register
   is 5'b10000 for max driver strength).

3. Bypass ODT auto refresh, and set the max bias current
   tuning reference. (Bit[57] of usbphy_ctrl register is
   1'b1 for bypass, and Bit[52:50] of usbphy_ctrl register
   is 3b'100  for max bias current tuning reference).

We have done the USB 2.0 compliance test and compatibility test
with this patch, it works well.

BRANCH=gru
BUG=chrome-os-partner:59623
TEST=plug/unplug USB HDD or smart phone in Type-C port,
check if they can be detected successfully.

Change-Id: I275c2236b8e469bfd04e9184d007eb095657225e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7735c514d4136978133c2299f2f58da8320bb89f
Original-Change-Id: I4e6c10faa1c03af9880a89afe4731a7065eb1e4e
Original-Signed-off-by: William wu <wulf@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/409856
Original-Commit-Ready: Eddie Cai <eddie.cai.rk@gmail.com>
Original-Tested-by: Cindy Han <cindy.han@samsung.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17566
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

0 files changed, 0 insertions, 0 deletions