1 files changed, 0 insertions, 76 deletions
diff --git a/platformio/temphum/src/temphum.cpp b/platformio/temphum/src/temphum.cpp
deleted file mode 100644
index 164f01e..0000000
--- a/platformio/temphum/src/temphum.cpp
+++ /dev/null
@@ -1,76 +0,0 @@
-#ifndef CONFIG_TARGET_ESP01
-#include <Arduino.h>
-#endif
-#include <homekit/logging.h>
-#include "temphum.h"
-
-namespace homekit::temphum {
-
-void BaseSensor::setup() const {
-#ifndef CONFIG_TARGET_ESP01
-    pinMode(CONFIG_SDA_GPIO, OUTPUT);
-    pinMode(CONFIG_SCL_GPIO, OUTPUT);
-
-    Wire.begin(CONFIG_SDA_GPIO, CONFIG_SCL_GPIO);
-#else
-    Wire.begin();
-#endif
-}
-
-void BaseSensor::writeCommand(int reg) const {
-    Wire.beginTransmission(dev_addr);
-    Wire.write(reg);
-    Wire.endTransmission();
-    delay(500); // wait for the measurement to be ready
-}
-
-SensorData Si7021::read() {
-    writeCommand(0xf3); // command to measure temperature
-    Wire.requestFrom(dev_addr, 2);
-    uint16_t temp_raw = Wire.read() << 8 | Wire.read();
-    double temperature = ((175.72 * temp_raw) / 65536.0) - 46.85;
-
-    writeCommand(0xf5); // command to measure humidity
-    Wire.requestFrom(dev_addr, 2);
-    uint16_t hum_raw = Wire.read() << 8 | Wire.read();
-    double humidity = ((125.0 * hum_raw) / 65536.0) - 6.0;
-
-    return {
-            .temp = temperature,
-            .rh = humidity
-    };
-}
-
-SensorData DHT12::read() {
-    SensorData sd;
-    byte raw[5];
-
-    writeCommand(0);
-    Wire.requestFrom(dev_addr, 5);
-
-    if (Wire.available() < 5) {
-        PRINTLN("DHT12: could not read 5 bytes");
-        goto end;
-    }
-
-    // Parse the received data
-    for (uint8_t i = 0; i < 5; i++)
-        raw[i] = Wire.read();
-
-    if (((raw[0] + raw[1] + raw[2] + raw[3]) & 0xff) != raw[4]) {
-        PRINTLN("DHT12: checksum error");
-        goto end;
-    }
-
-    // Calculate temperature and humidity values
-    sd.temp = raw[2] + (raw[3] & 0x7f) * 0.1;
-    if (raw[3] & 0x80)
-        sd.temp *= -1;
-
-    sd.rh = raw[0] + raw[1] * 0.1;
-
-end:
-    return sd;
-}
-
-}
-\ No newline at end of file