path: root/util/x86emu/yabel/io.c

/******************************************************************************
 * Copyright (c) 2004, 2008 IBM Corporation
 * Copyright (c) 2009 Pattrick Hueper <phueper@hueper.net>
 * All rights reserved.
 * This program and the accompanying materials
 * are made available under the terms of the BSD License
 * which accompanies this distribution, and is available at
 * http://www.opensource.org/licenses/bsd-license.php
 *
 * Contributors:
 *     IBM Corporation - initial implementation
 *****************************************************************************/

#include <types.h>
#ifdef CONFIG_COREBOOT_V2
#include "compat/rtas.h"
#include "compat/time.h"
#else
#include <cpu.h>
#include "rtas.h"
#include <time.h>
#endif
#include "device.h"
#include "debug.h"
#include <x86emu/x86emu.h>

#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <device/pci.h>
#include <device/pci_ops.h>
#endif

// those are defined in net-snk/oflib/pci.c
extern unsigned int read_io(void *, size_t);
extern int write_io(void *, unsigned int, size_t);

//defined in net-snk/kernel/timer.c
extern u64 get_time(void);

// these are not used, only needed for linking,  must be overridden using X86emu_setupPioFuncs
// with the functions and struct below
void
outb(u8 val, u16 port)
{
	printf("WARNING: outb not implemented!\n");
	HALT_SYS();
}

void
outw(u16 val, u16 port)
{
	printf("WARNING: outw not implemented!\n");
	HALT_SYS();
}

void
outl(u32 val, u16 port)
{
	printf("WARNING: outl not implemented!\n");
	HALT_SYS();
}

u8
inb(u16 port)
{
	printf("WARNING: inb not implemented!\n");
	HALT_SYS();
	return 0;
}

u16
inw(u16 port)
{
	printf("WARNING: inw not implemented!\n");
	HALT_SYS();
	return 0;
}

u32
inl(u16 port)
{
	printf("WARNING: inl not implemented!\n");
	HALT_SYS();
	return 0;
}

u32 pci_cfg_read(X86EMU_pioAddr addr, u8 size);
void pci_cfg_write(X86EMU_pioAddr addr, u32 val, u8 size);
u8 handle_port_61h(void);

u8
my_inb(X86EMU_pioAddr addr)
{
	u8 rval = 0xFF;
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __func__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		rval = read_io((void *)translated_addr, 1);
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %02x\n", __func__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0x61:
			//8254 KB Controller / Timer Port
			rval = handle_port_61h();
			//DEBUG_PRINTF_IO("%s(%04x) KB / Timer Port B --> %02x\n", __func__, addr, rval);
			return rval;
			break;
		case 0xCFC:
		case 0xCFD:
		case 0xCFE:
		case 0xCFF:
			// PCI Config Mechanism 1 Ports
			return (u8) pci_cfg_read(addr, 1);
			break;
		case 0x0a:
			CHECK_DBG(DEBUG_INTR) {
				X86EMU_trace_on();
			}
			M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
			//HALT_SYS();
			// no break, intentional fall-through to default!!
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __func__, addr);
			rval = *((u8 *) (bios_device.io_buffer + addr));
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %02x\n",
					__func__, addr, rval);
			return rval;
			break;
		}
	}
}

u16
my_inw(X86EMU_pioAddr addr)
{
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __func__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		u16 rval;
		if ((translated_addr & (u64) 0x1) == 0) {
			// 16 bit aligned access...
			u16 tempval = read_io((void *)translated_addr, 2);
			//little endian conversion
			rval = in16le((void *) &tempval);
		} else {
			// unaligned access, read single bytes, little-endian
			rval = (read_io((void *)translated_addr, 1) << 8)
				| (read_io((void *)(translated_addr + 1), 1));
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %04x\n", __func__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFE:
			//PCI Config Mechanism 1
			return (u16) pci_cfg_read(addr, 2);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __func__, addr);
			u16 rval =
			    in16le((void *) bios_device.io_buffer + addr);
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %04x\n",
					__func__, addr, rval);
			return rval;
			break;
		}
	}
}

u32
my_inl(X86EMU_pioAddr addr)
{
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __func__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		u32 rval;
		if ((translated_addr & (u64) 0x3) == 0) {
			// 32 bit aligned access...
			u32 tempval = read_io((void *) translated_addr, 4);
			//little endian conversion
			rval = in32le((void *) &tempval);
		} else {
			// unaligned access, read single bytes, little-endian
			rval = (read_io((void *)(translated_addr), 1) << 24)
				| (read_io((void *)(translated_addr + 1), 1) << 16)
				| (read_io((void *)(translated_addr + 2), 1) << 8)
				| (read_io((void *)(translated_addr + 3), 1));
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %08x\n", __func__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0xCFC:
			//PCI Config Mechanism 1
			return pci_cfg_read(addr, 4);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __func__, addr);
			u32 rval =
			    in32le((void *) bios_device.io_buffer + addr);
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %08x\n",
					__func__, addr, rval);
			return rval;
			break;
		}
	}
}

void
my_outb(X86EMU_pioAddr addr, u8 val)
{
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__func__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		write_io((void *) translated_addr, val, 1);
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %02x\n", __func__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFD:
		case 0xCFE:
		case 0xCFF:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 1);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%02x) writing to bios_device.io_buffer\n",
			     __func__, addr, val);
			*((u8 *) (bios_device.io_buffer + addr)) = val;
			break;
		}
	}
}

void
my_outw(X86EMU_pioAddr addr, u16 val)
{
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__func__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		if ((translated_addr & (u64) 0x1) == 0) {
			// little-endian conversion
			u16 tempval = in16le((void *) &val);
			// 16 bit aligned access...
			write_io((void *) translated_addr, tempval, 2);
		} else {
			// unaligned access, write single bytes, little-endian
			write_io(((void *) (translated_addr + 1)),
				(u8) ((val & 0xFF00) >> 8), 1);
			write_io(((void *) translated_addr),
				(u8) (val & 0x00FF), 1);
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %04x\n", __func__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFE:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 2);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%04x) writing to bios_device.io_buffer\n",
			     __func__, addr, val);
			out16le((void *) bios_device.io_buffer + addr, val);
			break;
		}
	}
}

void
my_outl(X86EMU_pioAddr addr, u32 val)
{
	unsigned long translated_addr = addr;
	u8 translated = biosemu_dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__func__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __func__, addr, translated_addr);
		if ((translated_addr & (u64) 0x3) == 0) {
			// little-endian conversion
			u32 tempval = in32le((void *) &val);
			// 32 bit aligned access...
			write_io((void *) translated_addr,  tempval, 4);
		} else {
			// unaligned access, write single bytes, little-endian
			write_io(((void *) translated_addr + 3),
			    (u8) ((val & 0xFF000000) >> 24), 1);
			write_io(((void *) translated_addr + 2),
			    (u8) ((val & 0x00FF0000) >> 16), 1);
			write_io(((void *) translated_addr + 1),
			    (u8) ((val & 0x0000FF00) >> 8), 1);
			write_io(((void *) translated_addr),
			    (u8) (val & 0x000000FF), 1);
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %08x\n", __func__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 4);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%08x) writing to bios_device.io_buffer\n",
			     __func__, addr, val);
			out32le((void *) bios_device.io_buffer + addr, val);
			break;
		}
	}
}

u32
pci_cfg_read(X86EMU_pioAddr addr, u8 size)
{
	u32 rval = 0xFFFFFFFF;
	struct device * dev;
	if ((addr >= 0xCFC) && ((addr + size) <= 0xD00)) {
		// PCI Configuration Mechanism 1 step 1
		// write to 0xCF8, sets bus, device, function and Config Space offset
		// later read from 0xCFC-0xCFF returns the value...
		u8 bus, devfn, offs;
		u32 port_cf8_val = my_inl(0xCF8);
		if ((port_cf8_val & 0x80000000) != 0) {
			//highest bit enables config space mapping
			bus = (port_cf8_val & 0x00FF0000) >> 16;
			devfn = (port_cf8_val & 0x0000FF00) >> 8;
			offs = (port_cf8_val & 0x000000FF);
			offs += (addr - 0xCFC);	// if addr is not 0xcfc, the offset is moved accordingly
			DEBUG_PRINTF_INTR("%s(): PCI Config Read from device: bus: %02x, devfn: %02x, offset: %02x\n",
				__func__, bus, devfn, offs);
#if defined(CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES) && CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES==1
			dev = dev_find_slot(bus, devfn);
			DEBUG_PRINTF_INTR("%s(): dev_find_slot() returned: %s\n",
				__func__, dev_path(dev));
			if (dev == 0) {
				// fail accesses to non-existent devices...
#else
			dev = bios_device.dev;
			if ((bus != bios_device.bus)
			     || (devfn != bios_device.devfn)) {
				// fail accesses to any device but ours...
#endif
				printf
				    ("%s(): Config read access invalid device! bus: %02x (%02x), devfn: %02x (%02x), offs: %02x\n",
				     __func__, bus, bios_device.bus, devfn,
				     bios_device.devfn, offs);
				SET_FLAG(F_CF);
				HALT_SYS();
				return 0;
			} else {
#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
				switch (size) {
					case 1:
						rval = pci_read_config8(dev, offs);
						break;
					case 2:
						rval = pci_read_config16(dev, offs);
						break;
					case 4:
						rval = pci_read_config32(dev, offs);
						break;
				}
#else
				rval =
				    (u32) rtas_pci_config_read(bios_device.
								    puid, size,
								    bus, devfn,
								    offs);
#endif
				DEBUG_PRINTF_IO
				    ("%s(%04x) PCI Config Read @%02x, size: %d --> 0x%08x\n",
				     __func__, addr, offs, size, rval);
			}
		}
	}
	return rval;
}

void
pci_cfg_write(X86EMU_pioAddr addr, u32 val, u8 size)
{
	if ((addr >= 0xCFC) && ((addr + size) <= 0xD00)) {
		// PCI Configuration Mechanism 1 step 1
		// write to 0xCF8, sets bus, device, function and Config Space offset
		// later write to 0xCFC-0xCFF sets the value...
		u8 bus, devfn, offs;
		u32 port_cf8_val = my_inl(0xCF8);
		if ((port_cf8_val & 0x80000000) != 0) {
			//highest bit enables config space mapping
			bus = (port_cf8_val & 0x00FF0000) >> 16;
			devfn = (port_cf8_val & 0x0000FF00) >> 8;
			offs = (port_cf8_val & 0x000000FF);
			offs += (addr - 0xCFC);	// if addr is not 0xcfc, the offset is moved accordingly
			if ((bus != bios_device.bus)
			    || (devfn != bios_device.devfn)) {
				// fail accesses to any device but ours...
				printf
				    ("Config write access invalid! PCI device %x:%x.%x, offs: %x\n",
				     bus, devfn >> 3, devfn & 7, offs);
				HALT_SYS();
			} else {
#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
				switch (size) {
					case 1:
						pci_write_config8(bios_device.dev, offs, val);
						break;
					case 2:
						pci_write_config16(bios_device.dev, offs, val);
						break;
					case 4:
						pci_write_config32(bios_device.dev, offs, val);
						break;
				}
#else
				rtas_pci_config_write(bios_device.puid,
						      size, bus, devfn, offs,
						      val);
#endif
				DEBUG_PRINTF_IO
				    ("%s(%04x) PCI Config Write @%02x, size: %d <-- 0x%08x\n",
				     __func__, addr, offs, size, val);
			}
		}
	}
}

u8
handle_port_61h(void)
{
	static u64 last_time = 0;
	u64 curr_time = get_time();
	u64 time_diff;	// time since last call
	u32 period_ticks;	// length of a period in ticks
	u32 nr_periods;	//number of periods passed since last call
	// bit 4 should toggle with every (DRAM) refresh cycle... (66kHz??)
	time_diff = curr_time - last_time;
	// at 66kHz a period is ~ 15 ns long, converted to ticks: (tb_freq is ticks/second)
	// TODO: as long as the frequency does not change, we should not calculate this every time
	period_ticks = (15 * tb_freq) / 1000000;
	nr_periods = time_diff / period_ticks;
	// if the number if ticks passed since last call is odd, we toggle bit 4
	if ((nr_periods % 2) != 0) {
		*((u8 *) (bios_device.io_buffer + 0x61)) ^= 0x10;
	}
	//finally read the value from the io_buffer
	return *((u8 *) (bios_device.io_buffer + 0x61));
}