1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
|
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2006 coresystems GmbH <info@coresystems.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "superiotool.h"
void dump_fintek(uint16_t port, uint16_t did)
{
switch (did) {
case 0x0604:
printf("Fintek F71805\n");
break;
case 0x4103:
printf("Fintek F71872\n");
break;
default:
printf("Unknown Fintek Super I/O: did=0x%04x\n", did);
return;
}
printf("Flash write is %s.\n",
regval(port, 0x28) & 0x80 ? "enabled" : "disabled");
printf("Flash control is 0x%04x.\n", regval(port, 0x28));
printf("27=%02x\n", regval(port, 0x27));
printf("29=%02x\n", regval(port, 0x29));
printf("2a=%02x\n", regval(port, 0x2a));
printf("2b=%02x\n", regval(port, 0x2b));
/* Select UART 1. */
regwrite(port, 0x07, 0x01);
printf("UART1 is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("UART1 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f,
regval(port, 0xf0) & 0x10 ? "RS485" : "RS232");
/* Select UART 2. */
regwrite(port, 0x07, 0x02);
printf("UART2 is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("UART2 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f,
regval(port, 0xf0) & 0x10 ? "RS485" : "RS232");
/* Select parallel port. */
regwrite(port, 0x07, 0x03);
printf("PARPORT is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("PARPORT base=%02x%02x, irq=%02x\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f);
/* Select HW monitor. */
regwrite(port, 0x07, 0x04);
printf("HW monitor is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("HW monitor base=%02x%02x, irq=%02x\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f);
/* Select GPIO. */
regwrite(port, 0x07, 0x05);
printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf
("GPIO 70=%02x, e0=%02x, e1=%02x, e2=%02x, e3=%02x, e4=%02x, e5=%02x\n",
regval(port, 0x70), regval(port, 0xe0), regval(port, 0xe1),
regval(port, 0xe2), regval(port, 0xe3), regval(port, 0xe4),
regval(port, 0xe5));
printf
("GPIO e6=%02x, e7=%02x, e8=%02x, e9=%02x, f0=%02x, f1=%02x, f3=%02x, f4=%02x\n",
regval(port, 0xe6), regval(port, 0xe7), regval(port, 0xe8),
regval(port, 0xe9), regval(port, 0xf0), regval(port, 0xf1),
regval(port, 0xf3), regval(port, 0xf4));
printf("GPIO f5=%02x, f6=%02x, f7=%02x, f8=%02x\n", regval(port, 0xf5),
regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8));
}
static void enter_conf_mode_fintek(uint16_t port)
{
/* Enable configuration sequence (Fintek uses this for example)
* Older ITE chips have the same enable sequence.
*/
outb(0x87, port);
outb(0x87, port);
}
static void exit_conf_mode_fintek(uint16_t port)
{
/* Exit MB PnP mode (for Fintek, doesn't hurt ITE). */
outb(0xaa, port);
}
void probe_idregs_fintek(uint16_t port)
{
uint16_t vid, did, success = 0;
enter_conf_mode_fintek(port);
outb(0x20, port);
if (inb(port) != 0x20) {
no_superio_found(port);
return;
}
did = inb(port + 1);
did |= (regval(port, 0x21) << 8);
vid = regval(port, 0x23);
vid |= (regval(port, 0x24) << 8);
printf("Super I/O found at 0x%02x: vid=0x%04x/did=0x%04x\n",
port, vid, did);
if (vid == 0xff || vid == 0xffff)
return;
/* printf("%s\n", familyid[id]); */
switch (did) {
case 0x0887: /* Pseudoreversed for ITE8708 */
case 0x1087: /* Pseudoreversed for ITE8710 */
success = 1;
dump_ite(port, ((did & 0xff) << 8) | ((did & 0xff00) >> 8));
regwrite(port, 0x02, 0x02); /* Exit MB PnP mode. */
break;
default:
break;
}
switch (vid) {
case 0x3419:
success = 1;
dump_fintek(port, did);
break;
default:
break;
}
if (!success)
printf("No dump for vid 0x%04x, did 0x%04x\n", vid, did);
exit_conf_mode_fintek(port);
}
|
