1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
/*
* This file is part of the superiotool project.
*
* Copyright (C) 9elements Agency GmbH <patrick.rudolph@9elements.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "superiotool.h"
#define DEVICE_SCRATCH_REG 0x21
static const struct superio_registers reg_table[] = {
{0x00, "AST2400", {
{NOLDN, NULL,
{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,EOT}},
{0x02, "SUART1",
{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
{0x00,0x03,0xf8,0x04,0x02,RSVD,EOT}},
{0x03, "SUART1",
{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
{0x00,0x02,0xf8,0x03,0x02,0x00,EOT}},
{0x04, "SWC",
{0x30,0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67,
0x70,0x71,EOT},
{0x00,0x08,0xe6,0x08,0xe0,0x08,0xe4,0x08,0xe8,
0x09,0x01,EOT}},
{0x05, "Keyboard config (KBC)",
{0x30,0x60,0x61,0x62,0x63,0x70,0x71,0x72,0x73,
0xf0,EOT},
{0x00,0x00,0x60,0x00,0x64,0x01,0x02,0x0c,0x02,
0x83,EOT}},
{0x07, "GPIO",
{0x30,0x38,0x70,0x71,EOT},
{0x00,0x00,0x0b,0x01,EOT}},
{0x0b, "SUART3",
{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
{0x00,0x03,0xe8,0x06,0x02,0x00,EOT}},
{0x0c, "SUART4",
{0x30,0x60,0x61,0x70,0x71,0xf0,EOT},
{0x00,0x02,0xe8,0x05,0x02,0x00,EOT}},
{0x0d, "iLPC2AHB",
{0x30,0x70,0x71,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,
0xf6,0xf7,0xf8,0xfe,EOT},
{0x00,0x09,0x01,NANA,NANA,NANA,NANA,NANA,NANA,
NANA,NANA,0x00,0x00,EOT}},
{0x0e, "Mailbox",
{0x30,0x60,0x61,0x70,0x71,EOT},
{0x00,0x08,0xc0,0x09,0x01,EOT}},
{EOT}}},
{EOT}
};
static void enter_conf_mode_ast(uint16_t port)
{
OUTB(0xa5, port);
OUTB(0xa5, port);
}
static void exit_conf_mode_ast(uint16_t port)
{
OUTB(0xaa, port);
}
static int detect_ast_superio(uint16_t port)
{
int i;
enter_conf_mode_ast(port);
/* Aspeed devices doesn't have a DEVICE_ID_REG.
* Host cycles that aren't decoded read as 0xff.
* Probe for the scratch register that are initialized to zero.
* The firmware might overwrite that, but it's the best we have.
*/
for (i = DEVICE_SCRATCH_REG; i < 0x30; i++) {
if (regval(port, i) != 0xff)
break;
}
if (i == 0x30) {
if (verbose)
printf(NOTFOUND
"scratch registers all read as 0xff\n");
}
exit_conf_mode_ast(port);
return i < 0x30;
}
void probe_idregs_aspeed(uint16_t port)
{
uint16_t chip_id = 0;
probing_for("Aspeed", "", port);
if (!detect_ast_superio(port))
return;
if (superio_unknown(reg_table, chip_id)) {
if (verbose)
printf(NOTFOUND "id=0x%02x\n", chip_id);
return;
}
printf("Found Aspeed %s (id=0x%02x) at 0x%x\n",
get_superio_name(reg_table, chip_id), chip_id, port);
chip_found = 1;
enter_conf_mode_ast(port);
dump_superio("Aspeed", reg_table, port, chip_id, LDN_SEL);
exit_conf_mode_ast(port);
}
void print_aspeed_chips(void)
{
print_vendor_chips("Aspeed", reg_table);
}
|
