path: root/src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-dap.h

#ifndef __BDK_CSRS_DAP_H__
#define __BDK_CSRS_DAP_H__
/* This file is auto-generated. Do not edit */

/***********************license start***************
 * Copyright (c) 2003-2017  Cavium Inc. (support@cavium.com). All rights
 * reserved.
 *
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.

 *   * Neither the name of Cavium Inc. nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.

 * This Software, including technical data, may be subject to U.S. export  control
 * laws, including the U.S. Export Administration Act and its  associated
 * regulations, and may be subject to export or import  regulations in other
 * countries.

 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
 * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
 * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
 * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
 * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
 * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
 * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
 * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
 * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
 ***********************license end**************************************/


/**
 * @file
 *
 * Configuration and status register (CSR) address and type definitions for
 * Cavium DAP.
 *
 * This file is auto generated. Do not edit.
 *
 */

/**
 * Enumeration dap_bar_e
 *
 * DAP Base Address Register Enumeration
 * Enumerates the base address registers.
 */
#define BDK_DAP_BAR_E_DAP_PF_BAR0 (0x87e002000000ll)
#define BDK_DAP_BAR_E_DAP_PF_BAR0_SIZE 0x100000ull
#define BDK_DAP_BAR_E_DAP_PF_BAR2_CN8 (0x87a080000000ll)
#define BDK_DAP_BAR_E_DAP_PF_BAR2_CN8_SIZE 0x2000000ull
#define BDK_DAP_BAR_E_DAP_PF_BAR2_CN9 (0x87a000000000ll)
#define BDK_DAP_BAR_E_DAP_PF_BAR2_CN9_SIZE 0x100000000ull

/**
 * Register (RSL) dap_const
 *
 * DAP Constant Register
 * This register contains constant for software discovery.
 */
union bdk_dap_const
{
    uint64_t u;
    struct bdk_dap_const_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t reserved_0_63         : 64;
#else /* Word 0 - Little Endian */
        uint64_t reserved_0_63         : 64;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_const_s cn; */
};
typedef union bdk_dap_const bdk_dap_const_t;

#define BDK_DAP_CONST BDK_DAP_CONST_FUNC()
static inline uint64_t BDK_DAP_CONST_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_CONST_FUNC(void)
{
    if (CAVIUM_IS_MODEL(CAVIUM_CN9XXX))
        return 0x87e002000130ll;
    __bdk_csr_fatal("DAP_CONST", 0, 0, 0, 0, 0);
}

#define typedef_BDK_DAP_CONST bdk_dap_const_t
#define bustype_BDK_DAP_CONST BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_CONST "DAP_CONST"
#define device_bar_BDK_DAP_CONST 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_CONST 0
#define arguments_BDK_DAP_CONST -1,-1,-1,-1

/**
 * Register (RSL) dap_eco
 *
 * INTERNAL: DAP ECO Register
 */
union bdk_dap_eco
{
    uint64_t u;
    struct bdk_dap_eco_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t reserved_32_63        : 32;
        uint64_t eco_ro                : 16; /**< [ 31: 16](RO) Reserved for ECO usage. */
        uint64_t eco_rw                : 16; /**< [ 15:  0](R/W) Reserved for ECO usage. */
#else /* Word 0 - Little Endian */
        uint64_t eco_rw                : 16; /**< [ 15:  0](R/W) Reserved for ECO usage. */
        uint64_t eco_ro                : 16; /**< [ 31: 16](RO) Reserved for ECO usage. */
        uint64_t reserved_32_63        : 32;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_eco_s cn; */
};
typedef union bdk_dap_eco bdk_dap_eco_t;

#define BDK_DAP_ECO BDK_DAP_ECO_FUNC()
static inline uint64_t BDK_DAP_ECO_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_ECO_FUNC(void)
{
    if (CAVIUM_IS_MODEL(CAVIUM_CN81XX))
        return 0x87e002000120ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN83XX))
        return 0x87e002000120ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN88XX_PASS2_X))
        return 0x87e002000120ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN9XXX))
        return 0x87e002000120ll;
    __bdk_csr_fatal("DAP_ECO", 0, 0, 0, 0, 0);
}

#define typedef_BDK_DAP_ECO bdk_dap_eco_t
#define bustype_BDK_DAP_ECO BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_ECO "DAP_ECO"
#define device_bar_BDK_DAP_ECO 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_ECO 0
#define arguments_BDK_DAP_ECO -1,-1,-1,-1

/**
 * Register (RSL32b) dap_hwpoll_cnt
 *
 * DAP Hardware Poll Counter Register
 */
union bdk_dap_hwpoll_cnt
{
    uint32_t u;
    struct bdk_dap_hwpoll_cnt_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t poll_dis              : 1;  /**< [ 31: 31](R/W) Disable hardware polling. For diagnostic use only. */
        uint32_t reserved_16_30        : 15;
        uint32_t count                 : 16; /**< [ 15:  0](R/W) Number of coprocessor-clocks between DAP bus poll intervals.
                                                                 With the approximate transaction delay of 256 cycles, the default
                                                                 results in a poll approximately every 2048 cycles.
                                                                 Must not be zero. For diagnostic use only. */
#else /* Word 0 - Little Endian */
        uint32_t count                 : 16; /**< [ 15:  0](R/W) Number of coprocessor-clocks between DAP bus poll intervals.
                                                                 With the approximate transaction delay of 256 cycles, the default
                                                                 results in a poll approximately every 2048 cycles.
                                                                 Must not be zero. For diagnostic use only. */
        uint32_t reserved_16_30        : 15;
        uint32_t poll_dis              : 1;  /**< [ 31: 31](R/W) Disable hardware polling. For diagnostic use only. */
#endif /* Word 0 - End */
    } s;
    struct bdk_dap_hwpoll_cnt_cn88xxp1
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_31           : 1;
        uint32_t reserved_16_30        : 15;
        uint32_t count                 : 16; /**< [ 15:  0](R/W) Number of coprocessor-clocks between DAP bus poll intervals.
                                                                 With the approximate transaction delay of 256 cycles, the default
                                                                 results in a poll approximately every 2048 cycles.
                                                                 Must not be zero. For diagnostic use only. */
#else /* Word 0 - Little Endian */
        uint32_t count                 : 16; /**< [ 15:  0](R/W) Number of coprocessor-clocks between DAP bus poll intervals.
                                                                 With the approximate transaction delay of 256 cycles, the default
                                                                 results in a poll approximately every 2048 cycles.
                                                                 Must not be zero. For diagnostic use only. */
        uint32_t reserved_16_30        : 15;
        uint32_t reserved_31           : 1;
#endif /* Word 0 - End */
    } cn88xxp1;
    /* struct bdk_dap_hwpoll_cnt_s cn9; */
    /* struct bdk_dap_hwpoll_cnt_s cn81xx; */
    /* struct bdk_dap_hwpoll_cnt_s cn83xx; */
    /* struct bdk_dap_hwpoll_cnt_s cn88xxp2; */
};
typedef union bdk_dap_hwpoll_cnt bdk_dap_hwpoll_cnt_t;

#define BDK_DAP_HWPOLL_CNT BDK_DAP_HWPOLL_CNT_FUNC()
static inline uint64_t BDK_DAP_HWPOLL_CNT_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_HWPOLL_CNT_FUNC(void)
{
    return 0x87e002000114ll;
}

#define typedef_BDK_DAP_HWPOLL_CNT bdk_dap_hwpoll_cnt_t
#define bustype_BDK_DAP_HWPOLL_CNT BDK_CSR_TYPE_RSL32b
#define basename_BDK_DAP_HWPOLL_CNT "DAP_HWPOLL_CNT"
#define device_bar_BDK_DAP_HWPOLL_CNT 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_HWPOLL_CNT 0
#define arguments_BDK_DAP_HWPOLL_CNT -1,-1,-1,-1

/**
 * Register (RSL32b) dap_imp_dar
 *
 * DAP Debug Authentication Register
 * This register controls the device enables and secure/nonsecure access permissions.
 */
union bdk_dap_imp_dar
{
    uint32_t u;
    struct bdk_dap_imp_dar_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_30_31        : 2;
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t reserved_11_27        : 17;
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure non invasive debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable non secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
#else /* Word 0 - Little Endian */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable non secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure non invasive debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t reserved_11_27        : 17;
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t reserved_30_31        : 2;
#endif /* Word 0 - End */
    } s;
    struct bdk_dap_imp_dar_cn88xxp1
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_11_31        : 21;
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure non invasive debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable non secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
#else /* Word 0 - Little Endian */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable non secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure non invasive debug enable.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t reserved_11_31        : 21;
#endif /* Word 0 - End */
    } cn88xxp1;
    struct bdk_dap_imp_dar_cn9
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_30_31        : 2;
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t distrace              : 1;  /**< [ 28: 28](RO) Trace unit is always discoverable in CNXXXX.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden.

                                                                 In CNXXXX, always discoverable. */
        uint32_t reserved_11_27        : 17;
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t reserved_6_8          : 3;
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
#else /* Word 0 - Little Endian */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t reserved_6_8          : 3;
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t reserved_11_27        : 17;
        uint32_t distrace              : 1;  /**< [ 28: 28](RO) Trace unit is always discoverable in CNXXXX.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden.

                                                                 In CNXXXX, always discoverable. */
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t reserved_30_31        : 2;
#endif /* Word 0 - End */
    } cn9;
    struct bdk_dap_imp_dar_cn81xx
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_30_31        : 2;
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t reserved_11_27        : 17;
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t reserved_6_8          : 3;
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
#else /* Word 0 - Little Endian */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t reserved_6_8          : 3;
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t reserved_11_27        : 17;
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t reserved_30_31        : 2;
#endif /* Word 0 - End */
    } cn81xx;
    /* struct bdk_dap_imp_dar_cn81xx cn83xx; */
    struct bdk_dap_imp_dar_cn88xxp2
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_30_31        : 2;
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t reserved_11_27        : 17;
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
#else /* Word 0 - Little Endian */
        uint32_t dbgen                 : 1;  /**< [  0:  0](R/W) Set this bit to enable debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t niden                 : 1;  /**< [  1:  1](R/W) Set this bit to enable nonsecure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spiden                : 1;  /**< [  2:  2](R/W) Set this bit to enable secure invasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t spniden               : 1;  /**< [  3:  3](R/W) Set this bit to enable secure noninvasive debug enable.

                                                                 When in trusted mode resets to zero, else one. */
        uint32_t dabdeviceen           : 1;  /**< [  4:  4](R/W) Set this bit to use ARM-AP inside DAP for DAB serial bus accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t deviceen              : 1;  /**< [  5:  5](R/W) Set this bit to use CVM-AP inside DAP for CNXXXX addressing accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t reserved_6_8          : 3;
        uint32_t caben                 : 1;  /**< [  9:  9](R/W) Enable CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault for all CAB accesses.
                                                                 1 = Enable all CAB accesses.

                                                                 When in trusted-mode resets to 0, else 1. */
        uint32_t cabnsen               : 1;  /**< [ 10: 10](R/W) Enable nonsecure CAB accesses from NCB and RSL devices.
                                                                 0 = Return fault on nonsecure CAB accesses.
                                                                 1 = Enable nonsecure CAB accesses. */
        uint32_t reserved_11_27        : 17;
        uint32_t distrace              : 1;  /**< [ 28: 28](R/W) Disable trace unit discovery.
                                                                 0 = Trace unit is discoverable by software.
                                                                 1 = Trace unit is hidden. */
        uint32_t distracefeature       : 1;  /**< [ 29: 29](R/W) Reserved.
                                                                 Internal:
                                                                 Passed to trace unit, but not presently used.
                                                                 0 = Future trace feature enabled.
                                                                 1 = Future trace feature disabled. */
        uint32_t reserved_30_31        : 2;
#endif /* Word 0 - End */
    } cn88xxp2;
};
typedef union bdk_dap_imp_dar bdk_dap_imp_dar_t;

#define BDK_DAP_IMP_DAR BDK_DAP_IMP_DAR_FUNC()
static inline uint64_t BDK_DAP_IMP_DAR_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_IMP_DAR_FUNC(void)
{
    return 0x87e002000100ll;
}

#define typedef_BDK_DAP_IMP_DAR bdk_dap_imp_dar_t
#define bustype_BDK_DAP_IMP_DAR BDK_CSR_TYPE_RSL32b
#define basename_BDK_DAP_IMP_DAR "DAP_IMP_DAR"
#define device_bar_BDK_DAP_IMP_DAR 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_IMP_DAR 0
#define arguments_BDK_DAP_IMP_DAR -1,-1,-1,-1

/**
 * Register (RSL32b) dap_owb_to
 *
 * DAP One-Wire-Bus Timeout Register
 * This register configures the one-wire bus.
 */
union bdk_dap_owb_to
{
    uint32_t u;
    struct bdk_dap_owb_to_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t to_dis                : 1;  /**< [ 31: 31](R/W) Disable timeout mechanism. */
        uint32_t reserved_16_30        : 15;
        uint32_t tovalue               : 16; /**< [ 15:  0](R/W) Timeout value. If an OWB transaction is longer than this number
                                                                 of coprocessor-clock cycles, it will timeout. */
#else /* Word 0 - Little Endian */
        uint32_t tovalue               : 16; /**< [ 15:  0](R/W) Timeout value. If an OWB transaction is longer than this number
                                                                 of coprocessor-clock cycles, it will timeout. */
        uint32_t reserved_16_30        : 15;
        uint32_t to_dis                : 1;  /**< [ 31: 31](R/W) Disable timeout mechanism. */
#endif /* Word 0 - End */
    } s;
    struct bdk_dap_owb_to_cn88xxp1
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_31           : 1;
        uint32_t reserved_16_30        : 15;
        uint32_t tovalue               : 16; /**< [ 15:  0](R/W) Timeout value. If an OWB transaction is longer than this number
                                                                 of coprocessor-clock cycles, it will timeout. */
#else /* Word 0 - Little Endian */
        uint32_t tovalue               : 16; /**< [ 15:  0](R/W) Timeout value. If an OWB transaction is longer than this number
                                                                 of coprocessor-clock cycles, it will timeout. */
        uint32_t reserved_16_30        : 15;
        uint32_t reserved_31           : 1;
#endif /* Word 0 - End */
    } cn88xxp1;
    /* struct bdk_dap_owb_to_s cn9; */
    /* struct bdk_dap_owb_to_s cn81xx; */
    /* struct bdk_dap_owb_to_s cn83xx; */
    /* struct bdk_dap_owb_to_s cn88xxp2; */
};
typedef union bdk_dap_owb_to bdk_dap_owb_to_t;

#define BDK_DAP_OWB_TO BDK_DAP_OWB_TO_FUNC()
static inline uint64_t BDK_DAP_OWB_TO_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_OWB_TO_FUNC(void)
{
    return 0x87e002000110ll;
}

#define typedef_BDK_DAP_OWB_TO bdk_dap_owb_to_t
#define bustype_BDK_DAP_OWB_TO BDK_CSR_TYPE_RSL32b
#define basename_BDK_DAP_OWB_TO "DAP_OWB_TO"
#define device_bar_BDK_DAP_OWB_TO 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_OWB_TO 0
#define arguments_BDK_DAP_OWB_TO -1,-1,-1,-1

/**
 * Register (RSL) dap_owb_to_status
 *
 * DAP One Wire Bus Timeout Status Register
 * This register reports error status.
 */
union bdk_dap_owb_to_status
{
    uint64_t u;
    struct bdk_dap_owb_to_status_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t reserved_1_63         : 63;
        uint64_t time_out              : 1;  /**< [  0:  0](R/W1C/H) This bit will be set if there is timeout in one wire bus activity. */
#else /* Word 0 - Little Endian */
        uint64_t time_out              : 1;  /**< [  0:  0](R/W1C/H) This bit will be set if there is timeout in one wire bus activity. */
        uint64_t reserved_1_63         : 63;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_owb_to_status_s cn; */
};
typedef union bdk_dap_owb_to_status bdk_dap_owb_to_status_t;

#define BDK_DAP_OWB_TO_STATUS BDK_DAP_OWB_TO_STATUS_FUNC()
static inline uint64_t BDK_DAP_OWB_TO_STATUS_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_OWB_TO_STATUS_FUNC(void)
{
    if (CAVIUM_IS_MODEL(CAVIUM_CN9XXX))
        return 0x87e002000138ll;
    __bdk_csr_fatal("DAP_OWB_TO_STATUS", 0, 0, 0, 0, 0);
}

#define typedef_BDK_DAP_OWB_TO_STATUS bdk_dap_owb_to_status_t
#define bustype_BDK_DAP_OWB_TO_STATUS BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_OWB_TO_STATUS "DAP_OWB_TO_STATUS"
#define device_bar_BDK_DAP_OWB_TO_STATUS 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_OWB_TO_STATUS 0
#define arguments_BDK_DAP_OWB_TO_STATUS -1,-1,-1,-1

/**
 * Register (RSL) dap_rst_on_warm
 *
 * DAP Reset On Warm Reset Register
 */
union bdk_dap_rst_on_warm
{
    uint64_t u;
    struct bdk_dap_rst_on_warm_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t reserved_1_63         : 63;
        uint64_t rst_on_warm           : 1;  /**< [  0:  0](R/W1S) Always reset DAR register.
                                                                 Once set this bit cannot be cleared until the next cold reset.
                                                                 [RST_ON_WARM] is set to one when trusted-mode changes from zero to one (i.e. a
                                                                 non-trusted boot is followed by a trusted boot). */
#else /* Word 0 - Little Endian */
        uint64_t rst_on_warm           : 1;  /**< [  0:  0](R/W1S) Always reset DAR register.
                                                                 Once set this bit cannot be cleared until the next cold reset.
                                                                 [RST_ON_WARM] is set to one when trusted-mode changes from zero to one (i.e. a
                                                                 non-trusted boot is followed by a trusted boot). */
        uint64_t reserved_1_63         : 63;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_rst_on_warm_s cn; */
};
typedef union bdk_dap_rst_on_warm bdk_dap_rst_on_warm_t;

#define BDK_DAP_RST_ON_WARM BDK_DAP_RST_ON_WARM_FUNC()
static inline uint64_t BDK_DAP_RST_ON_WARM_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_RST_ON_WARM_FUNC(void)
{
    if (CAVIUM_IS_MODEL(CAVIUM_CN81XX))
        return 0x87e002000128ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN83XX))
        return 0x87e002000128ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN88XX_PASS2_X))
        return 0x87e002000128ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN9XXX))
        return 0x87e002000128ll;
    __bdk_csr_fatal("DAP_RST_ON_WARM", 0, 0, 0, 0, 0);
}

#define typedef_BDK_DAP_RST_ON_WARM bdk_dap_rst_on_warm_t
#define bustype_BDK_DAP_RST_ON_WARM BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_RST_ON_WARM "DAP_RST_ON_WARM"
#define device_bar_BDK_DAP_RST_ON_WARM 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_RST_ON_WARM 0
#define arguments_BDK_DAP_RST_ON_WARM -1,-1,-1,-1

/**
 * Register (RSL) dap_scratch
 *
 * INTERNAL: DAP Scratch Register
 *
 * This register is a scratch register for software use.
 */
union bdk_dap_scratch
{
    uint64_t u;
    struct bdk_dap_scratch_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t data                  : 64; /**< [ 63:  0](R/W) Scratch data, not used by hardware. */
#else /* Word 0 - Little Endian */
        uint64_t data                  : 64; /**< [ 63:  0](R/W) Scratch data, not used by hardware. */
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_scratch_s cn; */
};
typedef union bdk_dap_scratch bdk_dap_scratch_t;

#define BDK_DAP_SCRATCH BDK_DAP_SCRATCH_FUNC()
static inline uint64_t BDK_DAP_SCRATCH_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_SCRATCH_FUNC(void)
{
    if (CAVIUM_IS_MODEL(CAVIUM_CN81XX))
        return 0x87e002000118ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN83XX))
        return 0x87e002000118ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN88XX_PASS2_X))
        return 0x87e002000118ll;
    if (CAVIUM_IS_MODEL(CAVIUM_CN9XXX))
        return 0x87e002000118ll;
    __bdk_csr_fatal("DAP_SCRATCH", 0, 0, 0, 0, 0);
}

#define typedef_BDK_DAP_SCRATCH bdk_dap_scratch_t
#define bustype_BDK_DAP_SCRATCH BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_SCRATCH "DAP_SCRATCH"
#define device_bar_BDK_DAP_SCRATCH 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_SCRATCH 0
#define arguments_BDK_DAP_SCRATCH -1,-1,-1,-1

/**
 * Register (RSL32b) dap_sraaddr
 *
 * DAP RSL Devices Broadcast Write Polling Register
 * This register controls broadcast write or polling to the cores.
 */
union bdk_dap_sraaddr
{
    uint32_t u;
    struct bdk_dap_sraaddr_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_29_31        : 3;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_21_27        : 7;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1.
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_2_4          : 3;
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Currently reserved. */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
#else /* Word 0 - Little Endian */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Currently reserved. */
        uint32_t reserved_2_4          : 3;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1.
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_21_27        : 7;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_29_31        : 3;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_sraaddr_s cn88xxp1; */
    struct bdk_dap_sraaddr_cn9
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_29_31        : 3;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_21_27        : 7;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1.
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_2_4          : 3;
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Reserved. */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
#else /* Word 0 - Little Endian */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Reserved. */
        uint32_t reserved_2_4          : 3;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1.
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_21_27        : 7;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_29_31        : 3;
#endif /* Word 0 - End */
    } cn9;
    /* struct bdk_dap_sraaddr_cn9 cn81xx; */
    /* struct bdk_dap_sraaddr_cn9 cn83xx; */
    struct bdk_dap_sraaddr_cn88xxp2
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint32_t reserved_29_31        : 3;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_21_27        : 7;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_2_4          : 3;
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Reserved. */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
#else /* Word 0 - Little Endian */
        uint32_t busy                  : 1;  /**< [  0:  0](RO/H) Busy indicator if the broadcast write or polling still in progress.
                                                                 0 = Idle.
                                                                 1 = Broadcast write or polling still in progress. */
        uint32_t errstatus             : 1;  /**< [  1:  1](RAZ) Reserved. */
        uint32_t reserved_2_4          : 3;
        uint32_t regnum                : 16; /**< [ 20:  5](R/W) If [CABDABSEL]=1, then \<19:5\> is the register number with these bit definitions:
                                                                 \<19\>: Op0[0].
                                                                 \<18:16\>: Op1
                                                                 \<15:12\>: CRn.
                                                                 \<11:8\>: CRm.
                                                                 \<7:5\>: Op.

                                                                 If [CABDABSEL]=0, then [REGNUM] is the register offset. */
        uint32_t reserved_21_27        : 7;
        uint32_t cabdabsel             : 1;  /**< [ 28: 28](R/W) CAB or DAB bus access selection for polling/broadcast write.
                                                                 0 = Polling/broadcast write is for DAB bus, bits \<20:5\> is the address offset.
                                                                 1 = Polling/broadcast write is for CAB bus, bits \<19:5\> is the register number. */
        uint32_t reserved_29_31        : 3;
#endif /* Word 0 - End */
    } cn88xxp2;
};
typedef union bdk_dap_sraaddr bdk_dap_sraaddr_t;

#define BDK_DAP_SRAADDR BDK_DAP_SRAADDR_FUNC()
static inline uint64_t BDK_DAP_SRAADDR_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_SRAADDR_FUNC(void)
{
    return 0x87e002000104ll;
}

#define typedef_BDK_DAP_SRAADDR bdk_dap_sraaddr_t
#define bustype_BDK_DAP_SRAADDR BDK_CSR_TYPE_RSL32b
#define basename_BDK_DAP_SRAADDR "DAP_SRAADDR"
#define device_bar_BDK_DAP_SRAADDR 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_SRAADDR 0
#define arguments_BDK_DAP_SRAADDR -1,-1,-1,-1

/**
 * Register (RSL) dap_sradata
 *
 * DAP Broadcast Write Data Register
 * Data register for broadcast writes and polling from the cores.
 */
union bdk_dap_sradata
{
    uint64_t u;
    struct bdk_dap_sradata_s
    {
#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */
        uint64_t reserved_0_63         : 64;
#else /* Word 0 - Little Endian */
        uint64_t reserved_0_63         : 64;
#endif /* Word 0 - End */
    } s;
    /* struct bdk_dap_sradata_s cn; */
};
typedef union bdk_dap_sradata bdk_dap_sradata_t;

#define BDK_DAP_SRADATA BDK_DAP_SRADATA_FUNC()
static inline uint64_t BDK_DAP_SRADATA_FUNC(void) __attribute__ ((pure, always_inline));
static inline uint64_t BDK_DAP_SRADATA_FUNC(void)
{
    return 0x87e002000108ll;
}

#define typedef_BDK_DAP_SRADATA bdk_dap_sradata_t
#define bustype_BDK_DAP_SRADATA BDK_CSR_TYPE_RSL
#define basename_BDK_DAP_SRADATA "DAP_SRADATA"
#define device_bar_BDK_DAP_SRADATA 0x0 /* PF_BAR0 */
#define busnum_BDK_DAP_SRADATA 0
#define arguments_BDK_DAP_SRADATA -1,-1,-1,-1

#endif /* __BDK_CSRS_DAP_H__ */