1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
/*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Initialisation of the PCI-to-ISA bridge and disabling the BIOS
* write protection (for flash) in function 0 of the chip.
* Enabling function 1 (IDE controller of the chip.
*/
#ifndef CONFIG_ISA_IO
#define CONFIG_ISA_IO 0xFE000000
#endif
#include <arch/io.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <console/console.h>
#include "w83c553f.h"
void initialise_pic(void);
void initialise_dma(void);
static void
w83c553_init(struct device *dev)
{
printk_info("Configure W83C553F ISA Bridge (Function 0)\n");
#if 0
/*
* Set ISA memory space NOT SURE ABOUT THIS???
*/
reg8 = pci_read_config8(dev, W83C553F_IPADCR);
/* 16 MB ISA memory space */
reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7);
reg8 &= ~W83C553F_IPADCR_MBE512;
pci_write_config8(dev, W83C553F_IPADCR, reg8);
/*
* Chip select: switch off BIOS write protection
*/
reg8 = pci_read_config8(dev, W83C553F_CSCR);
reg8 |= W83C553F_CSCR_UBIOSCSE;
reg8 &= ~W83C553F_CSCR_BIOSWP;
pci_write_config8(dev, W83C553F_CSCR, reg8);
/*
* Enable Port 92
*/
reg8 = W83C553F_ATSCR_P92E | W83C553F_ATSCR_KRCEE;
pci_write_config8(dev, W83C553F_CSCR, reg8);
/*
* Route IDE interrupts to IRQ 14 & 15 on 8259.
*/
pci_write_config8(dev, W83C553F_IDEIRCR, 0x90);
pci_write_config16(dev, W83C553F_PCIIRCR, 0xABEF);
/*
* Initialise ISA interrupt controller
*/
initialise_pic();
/*
* Initialise DMA controller
*/
initialise_dma();
#endif
printk_info("W83C553F configuration complete\n");
}
void initialise_pic(void)
{
outb(W83C553F_PIC1_ICW1, 0x11); /* start init sequence, ICW4 needed */
outb(W83C553F_PIC1_ICW2, 0x08); /* base address 00001 */
outb(W83C553F_PIC1_ICW3, 0x04); /* slave on IRQ2 */
outb(W83C553F_PIC1_ICW4, 0x01); /* x86 mode */
outb(W83C553F_PIC1_OCW1, 0xfb); /* enable IRQ 2 */
outb(W83C553F_PIC1_ELC, 0xf8); /* all IRQ's edge sensitive */
outb(W83C553F_PIC2_ICW1, 0x11); /* start init sequence, ICW4 needed */
outb(W83C553F_PIC2_ICW2, 0x08); /* base address 00001 */
outb(W83C553F_PIC2_ICW3, 0x02); /* slave ID 2 */
outb(W83C553F_PIC2_ICW4, 0x01); /* x86 mode */
outb(W83C553F_PIC2_OCW1, 0xff); /* disable all IRQ's */
outb(W83C553F_PIC2_ELC, 0xde); /* all IRQ's edge sensitive */
outb(W83C553F_TMR1_CMOD, 0x74);
outb(W83C553F_PIC2_OCW1, 0x20);
outb(W83C553F_PIC1_OCW1, 0x20);
outb(W83C553F_PIC2_OCW1, 0x2b);
outb(W83C553F_PIC1_OCW1, 0x2b);
}
void initialise_dma(void)
{
unsigned int channel;
unsigned int rvalue1, rvalue2;
/* perform a H/W reset of the devices */
outb(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00);
outw(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000);
/* initialise all channels to a sane state */
for (channel = 0; channel < 4; channel++) {
/*
* dependent upon the channel, setup the specifics:
*
* demand
* address-increment
* autoinitialize-disable
* verify-transfer
*/
switch (channel) {
case 0:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
break;
case 1:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
break;
case 2:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
break;
case 3:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
break;
default:
rvalue1 = 0x00;
rvalue2 = 0x00;
break;
}
/* write to write mode registers */
outb(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF);
outw(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF);
}
/* enable all channels */
outb(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00);
outw(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000);
/*
* initialize the global DMA configuration
*
* DACK# active low
* DREQ active high
* fixed priority
* channel group enable
*/
outb(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
outw(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
}
static void w83c553_enable_resources(device_t dev)
{
pci_dev_enable_resources(dev);
enable_childrens_resources(dev);
}
struct device_operations w83c553_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = w83c553_enable_resources,
.init = w83c553_init,
.scan_bus = scan_static_bus,
};
struct pci_driver w83c553f_pci_driver __pci_driver = {
/* w83c553f */
.ops = &w83c553_ops,
.device = PCI_DEVICE_ID_WINBOND_83C553,
.vendor = PCI_VENDOR_ID_WINBOND,
};
|
