1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz>
* Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
#include "vt8237r.h"
/* We support here K8M890/K8T890 and VT8237/S/A PCI1/Vlink */
static void vt8237_cfg(struct device *dev)
{
u8 regm;
device_t devfun3;
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T800_DRAM, 0);
if (!devfun3)
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M800_DRAM, 0);
if (!devfun3)
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CE_3, 0);
if (!devfun3)
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
if (!devfun3)
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CF_3, 0);
if (!devfun3)
die("Unknown NB");
/* CPU to PCI Flow Control 1 & 2, just fill in recommended. */
pci_write_config8(dev, 0x70, 0xc2);
pci_write_config8(dev, 0x71, 0xc8);
/* PCI Control */
pci_write_config8(dev, 0x72, 0xee);
pci_write_config8(dev, 0x73, 0x01);
pci_write_config8(dev, 0x74, 0x3c);
pci_write_config8(dev, 0x75, 0x0f);
pci_write_config8(dev, 0x76, 0x50);
pci_write_config8(dev, 0x77, 0x48);
pci_write_config8(dev, 0x78, 0x01);
/* APIC on HT */
/* Maybe Enable LDT APIC Mode bit3 set to 1 */
pci_write_config8(dev, 0x7c, 0x77);
/* WARNING: Need to copy some registers from NB (D0F3) to SB (D11F7). */
regm = pci_read_config8(devfun3, 0x88); /* Shadow mem CTRL */
pci_write_config8(dev, 0x57, regm);
regm = pci_read_config8(devfun3, 0x80); /* Shadow page C */
pci_write_config8(dev, 0x61, regm);
regm = pci_read_config8(devfun3, 0x81); /* Shadow page D */
pci_write_config8(dev, 0x62, regm);
/* Shadow page F + memhole copy */
regm = pci_read_config8(devfun3, 0x83);
pci_write_config8(dev, 0x63, regm);
regm = pci_read_config8(devfun3, 0x82);/* Shadow page E */
pci_write_config8(dev, 0x64, regm);
regm = pci_read_config8(devfun3, 0x86); /* SMM and APIC decoding */
pci_write_config8(dev, 0xe6, regm);
}
/**
* Example of setup: Setup the V-Link for VT8237R, 8X mode.
*
* For K8T890CF VIA recommends what is in VIA column, AW is award 8X:
*
* REG DEF AW VIA-8X VIA-4X
* -----------------------------
* NB V-Link Manual Driving Control strobe 0xb5 0x46 0x46 0x88 0x88
* NB V-Link Manual Driving Control - Data 0xb6 0x46 0x46 0x88 0x88
* NB V-Link Receiving Strobe Delay 0xb7 0x02 0x02 0x61 0x01
* NB V-Link Compensation Control bit4,0 (b5,b6) 0xb4 0x10 0x10 0x11 0x11
* SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98
* SB V-Link Data drive Control???? 0xba 0x00 0xbb 0x77 0x77
* SB V-Link Receive Strobe Delay???? 0xbb 0x04 0x11 0x11 0x11
* SB V-Link Compensation Control bit0 (use b9) 0xb8 0x00 0x01 0x01 0x01
* V-Link CKG Control 0xb0 0x05 0x05 0x06 0x03
* V-Link CKG Control 0xb1 0x05 0x05 0x01 0x03
*/
/* we setup 533MB/s mode full duplex */
static void vt8237s_vlink_init(struct device *dev)
{
u8 reg;
device_t devfun7;
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T800_NB_SB_CTR, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M800_NB_SB_CTR, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CF_7, 0);
/* No pairing NB was found. */
if (!devfun7)
{
print_debug("vt8237s_vlink_init: No pairing NB was found.\n");
return;
}
/*
* This init code is valid only for the VT8237S! For different
* southbridges (e.g. VT8237A, VT8237S, VT8237R (without plus R)
* and VT8251) a different init code is required.
*/
/* disable auto disconnect */
reg = pci_read_config8(devfun7, 0x42);
reg &= ~0x4;
pci_write_config8(devfun7, 0x42, reg);
/* NB part setup */
pci_write_config8(devfun7, 0xb5, 0x66);
pci_write_config8(devfun7, 0xb6, 0x66);
pci_write_config8(devfun7, 0xb7, 0x64);
reg = pci_read_config8(devfun7, 0xb4);
reg |= 0x1;
reg &= ~0x10;
pci_write_config8(devfun7, 0xb4, reg);
pci_write_config8(devfun7, 0xb0, 0x6);
pci_write_config8(devfun7, 0xb1, 0x1);
/* SB part setup */
pci_write_config8(dev, 0xb7, 0x60);
pci_write_config8(dev, 0xb9, 0x88);
pci_write_config8(dev, 0xba, 0x88);
pci_write_config8(dev, 0xbb, 0x89);
reg = pci_read_config8(dev, 0xbd);
reg |= 0x3;
reg &= ~0x4;
pci_write_config8(dev, 0xbd, reg);
reg = pci_read_config8(dev, 0xbc);
reg &= ~0x7;
pci_write_config8(dev, 0xbc, reg);
/* Program V-link 8X 8bit full duplex, parity enabled. */
pci_write_config8(dev, 0x48, 0x23 | 0x80);
/* enable auto disconnect, for STPGNT and HALT */
reg = pci_read_config8(devfun7, 0x42);
reg |= 0x7;
pci_write_config8(devfun7, 0x42, reg);
}
static void vt8237a_vlink_init(struct device *dev)
{
u8 reg;
device_t devfun7;
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T800_NB_SB_CTR, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M800_NB_SB_CTR, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_K8T890CF_7, 0);
/* No pairing NB was found. */
if (!devfun7)
{
print_debug("vt8237a_vlink_init: No pairing NB was found.\n");
return;
}
/*
* This init code is valid only for the VT8237A! For different
* southbridges (e.g. VT8237S, VT8237R and VT8251) a different
* init code is required.
*
* FIXME: This is based on vt8237r_vlink_init() in
* k8t890/k8t890_ctrl.c and modified to fit what the AMI
* BIOS on my M2V wrote to these registers (by looking
* at lspci -nxxx output).
* Works for me.
*/
/* disable auto disconnect */
reg = pci_read_config8(devfun7, 0x42);
reg &= ~0x4;
pci_write_config8(devfun7, 0x42, reg);
/* NB part setup */
pci_write_config8(devfun7, 0xb5, 0x88);
pci_write_config8(devfun7, 0xb6, 0x88);
pci_write_config8(devfun7, 0xb7, 0x61);
reg = pci_read_config8(devfun7, 0xb4);
reg |= 0x11;
pci_write_config8(devfun7, 0xb4, reg);
pci_write_config8(devfun7, 0xb0, 0x6);
pci_write_config8(devfun7, 0xb1, 0x1);
/* SB part setup */
pci_write_config8(dev, 0xb7, 0x50);
pci_write_config8(dev, 0xb9, 0x88);
pci_write_config8(dev, 0xba, 0x8a);
pci_write_config8(dev, 0xbb, 0x88);
reg = pci_read_config8(dev, 0xbd);
reg |= 0x3;
reg &= ~0x4;
pci_write_config8(dev, 0xbd, reg);
reg = pci_read_config8(dev, 0xbc);
reg &= ~0x7;
pci_write_config8(dev, 0xbc, reg);
pci_write_config8(dev, 0x48, 0x23);
/* enable auto disconnect, for STPGNT and HALT */
reg = pci_read_config8(devfun7, 0x42);
reg |= 0x7;
pci_write_config8(devfun7, 0x42, reg);
}
static void ctrl_enable(struct device *dev)
{
/* Enable the 0:13 and 0:13.1. */
/* FIXME */
pci_write_config8(dev, 0x4f, 0x43);
}
static void ctrl_init(struct device *dev)
{
/*
* TODO: Fix some ordering issue for V-link set Rx77[6] and
* PCI1_Rx4F[0] should to 1.
* FIXME DO you need?
*/
/*
* VT8237R specific configuration. Other SB are done in their own
* directories. TODO: Add A version.
*/
device_t devsb = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237S_LPC, 0);
if (devsb) {
vt8237s_vlink_init(dev);
}
devsb = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237A_LPC, 0);
if (devsb) {
vt8237a_vlink_init(dev);
}
/* Configure PCI1 and copy mirror registers from D0F3. */
vt8237_cfg(dev);
dump_south(dev);
}
static const struct device_operations ctrl_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ctrl_init,
.enable = ctrl_enable,
.ops_pci = 0,
};
static const struct pci_driver northbridge_driver_t __pci_driver = {
.ops = &ctrl_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VT8237_VLINK,
};
|
