1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
* Copyright (C) 2009 coresystems GmbH
* Copyright (C) 2013 Vladimir Serbinenko
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
#include <device/smbus_def.h>
#include "pch.h"
static void smbus_delay(void)
{
inb(0x80);
}
static int smbus_wait_until_ready(u16 smbus_base)
{
unsigned loops = SMBUS_TIMEOUT;
unsigned char byte;
do {
smbus_delay();
if (--loops == 0)
break;
byte = inb(smbus_base + SMBHSTSTAT);
} while (byte & 1);
return loops ? 0 : -1;
}
static int smbus_wait_until_done(u16 smbus_base)
{
unsigned loops = SMBUS_TIMEOUT;
unsigned char byte;
do {
smbus_delay();
if (--loops == 0)
break;
byte = inb(smbus_base + SMBHSTSTAT);
} while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
return loops ? 0 : -1;
}
static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
{
unsigned char global_status_register;
unsigned char byte;
if (smbus_wait_until_ready(smbus_base) < 0) {
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
}
/* Setup transaction */
/* Disable interrupts */
outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
/* Set the device I'm talking too */
outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
/* Set the command/address... */
outb(address & 0xff, smbus_base + SMBHSTCMD);
/* Set up for a byte data read */
outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
(smbus_base + SMBHSTCTL));
/* Clear any lingering errors, so the transaction will run */
outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
/* Clear the data byte... */
outb(0, smbus_base + SMBHSTDAT0);
/* Start the command */
outb((inb(smbus_base + SMBHSTCTL) | 0x40),
smbus_base + SMBHSTCTL);
/* Poll for transaction completion */
if (smbus_wait_until_done(smbus_base) < 0) {
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
global_status_register = inb(smbus_base + SMBHSTSTAT);
/* Ignore the "In Use" status... */
global_status_register &= ~(3 << 5);
/* Read results of transaction */
byte = inb(smbus_base + SMBHSTDAT0);
if (global_status_register != (1 << 1)) {
return SMBUS_ERROR;
}
return byte;
}
static int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data)
{
unsigned char global_status_register;
if (smbus_wait_until_ready(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
/* Setup transaction */
/* Disable interrupts */
outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
/* Set the device I'm talking too */
outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
/* Set the command/address... */
outb(address & 0xff, smbus_base + SMBHSTCMD);
/* Set up for a byte data read */
outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
(smbus_base + SMBHSTCTL));
/* Clear any lingering errors, so the transaction will run */
outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
/* Clear the data byte... */
outb(data, smbus_base + SMBHSTDAT0);
/* Start the command */
outb((inb(smbus_base + SMBHSTCTL) | 0x40),
smbus_base + SMBHSTCTL);
/* Poll for transaction completion */
if (smbus_wait_until_done(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
global_status_register = inb(smbus_base + SMBHSTSTAT);
/* Ignore the "In Use" status... */
global_status_register &= ~(3 << 5);
/* Read results of transaction */
if (global_status_register != (1 << 1))
return SMBUS_ERROR;
return 0;
}
#ifdef __PRE_RAM__
static int do_smbus_block_write(unsigned smbus_base, unsigned device,
unsigned cmd, unsigned bytes, const u8 *buf)
{
u8 status;
if (smbus_wait_until_ready(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
/* Setup transaction */
/* Disable interrupts */
outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
/* Set the device I'm talking too */
outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
/* Set the command/address... */
outb(cmd & 0xff, smbus_base + SMBHSTCMD);
/* Set up for a block data write */
outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
(smbus_base + SMBHSTCTL));
/* Clear any lingering errors, so the transaction will run */
outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
/* set number of bytes to transfer */
outb(bytes, smbus_base + SMBHSTDAT0);
outb(*buf++, smbus_base + SMBBLKDAT);
bytes--;
/* Start the command */
outb((inb(smbus_base + SMBHSTCTL) | 0x40),
smbus_base + SMBHSTCTL);
while(!(inb(smbus_base + SMBHSTSTAT) & 1));
/* Poll for transaction completion */
do {
status = inb(smbus_base + SMBHSTSTAT);
if (status & ((1 << 4) | /* FAILED */
(1 << 3) | /* BUS ERR */
(1 << 2))) /* DEV ERR */
return SMBUS_ERROR;
if (status & 0x80) { /* Byte done */
outb(*buf++, smbus_base + SMBBLKDAT);
outb(status, smbus_base + SMBHSTSTAT);
}
} while(status & 0x01);
return 0;
}
static int do_smbus_block_read(unsigned smbus_base, unsigned device,
unsigned cmd, unsigned bytes, u8 *buf)
{
u8 status;
int bytes_read = 0;
if (smbus_wait_until_ready(smbus_base) < 0)
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
/* Setup transaction */
/* Disable interrupts */
outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
/* Set the device I'm talking too */
outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
/* Set the command/address... */
outb(cmd & 0xff, smbus_base + SMBHSTCMD);
/* Set up for a block data read */
outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
(smbus_base + SMBHSTCTL));
/* Clear any lingering errors, so the transaction will run */
outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
/* Start the command */
outb((inb(smbus_base + SMBHSTCTL) | 0x40),
smbus_base + SMBHSTCTL);
while(!(inb(smbus_base + SMBHSTSTAT) & 1));
/* Poll for transaction completion */
do {
status = inb(smbus_base + SMBHSTSTAT);
if (status & ((1 << 4) | /* FAILED */
(1 << 3) | /* BUS ERR */
(1 << 2))) /* DEV ERR */
return SMBUS_ERROR;
if (status & 0x80) { /* Byte done */
*buf = inb(smbus_base + SMBBLKDAT);
buf++;
bytes_read++;
outb(status, smbus_base + SMBHSTSTAT);
if (--bytes == 1) {
/* indicate that next byte is the last one */
outb(inb(smbus_base + SMBHSTCTL) | 0x20,
smbus_base + SMBHSTCTL);
}
}
} while(status & 0x01);
return bytes_read;
}
#endif
|
