1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/mmio.h>
#include <delay.h>
#include <device/azalia_device.h>
#include "chip.h"
#include "i82801jx.h"
static int codec_detect(u8 *base)
{
u32 reg32;
/* Set Bit 0 to 0 to enter reset state (BAR + 0x8)[0] */
if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, 0) < 0)
goto no_codec;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
if (azalia_set_bits(base + HDA_GCTL_REG, HDA_GCTL_CRST, HDA_GCTL_CRST) < 0)
goto no_codec;
/* Read in Codec location (BAR + 0xe)[2..0] */
reg32 = read32(base + HDA_STATESTS_REG);
reg32 &= 0x0f;
if (!reg32)
goto no_codec;
return reg32;
no_codec:
/* Codec Not found */
/* Put HDA back in reset (BAR + 0x8) [0] */
azalia_set_bits(base + HDA_GCTL_REG, 1, 0);
printk(BIOS_DEBUG, "Azalia: No codec!\n");
return 0;
}
/*
* Wait 50usec for the codec to indicate it is ready.
* No response would imply that the codec is non-operative.
*/
static int wait_for_ready(u8 *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
while (timeout--) {
u32 reg32 = read32(base + HDA_ICII_REG);
if (!(reg32 & HDA_ICII_BUSY))
return 0;
udelay(1);
}
return -1;
}
/*
* Wait 50usec for the codec to indicate that it accepted the previous command.
* No response would imply that the code is non-operative.
*/
static int wait_for_valid(u8 *base)
{
u32 reg32;
/* Use a 50 usec timeout - the Linux kernel uses the same duration */
int timeout = 50;
/* Send the verb to the codec */
reg32 = read32(base + HDA_ICII_REG);
reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID;
write32(base + HDA_ICII_REG, reg32);
while (timeout--) {
reg32 = read32(base + HDA_ICII_REG);
if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID)
return 0;
udelay(1);
}
return -1;
}
static void codec_init(struct device *dev, u8 *base, int addr)
{
u32 reg32;
const u32 *verb;
u32 verb_size;
int i;
printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr);
/* 1 */
if (wait_for_ready(base) < 0) {
printk(BIOS_DEBUG, " codec not ready.\n");
return;
}
reg32 = (addr << 28) | 0x000f0000;
write32(base + HDA_IC_REG, reg32);
if (wait_for_valid(base) < 0) {
printk(BIOS_DEBUG, " codec not valid.\n");
return;
}
/* 2 */
reg32 = read32(base + HDA_IR_REG);
printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32);
verb_size = azalia_find_verb(reg32, &verb);
if (!verb_size) {
printk(BIOS_DEBUG, "Azalia: No verb!\n");
return;
}
printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size);
/* 3 */
for (i = 0; i < verb_size; i++) {
if (wait_for_ready(base) < 0)
return;
write32(base + HDA_IC_REG, verb[i]);
if (wait_for_valid(base) < 0)
return;
}
printk(BIOS_DEBUG, "Azalia: verb loaded.\n");
}
static void codecs_init(struct device *dev, u8 *base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
if (codec_mask & (1 << i))
codec_init(dev, base, i);
}
for (i = 0; i < pc_beep_verbs_size; i++) {
if (wait_for_ready(base) < 0)
return;
write32(base + HDA_IC_REG, pc_beep_verbs[i]);
if (wait_for_valid(base) < 0)
return;
}
}
static void azalia_init(struct device *dev)
{
u8 *base;
struct resource *res;
u32 codec_mask;
// ESD
pci_update_config32(dev, 0x134, ~0x00ff0000, 2 << 16);
// Link1 description
pci_update_config32(dev, 0x140, ~0x00ff0000, 2 << 16);
// Port VC0 Resource Control Register
pci_update_config32(dev, 0x114, ~0x000000ff, 1);
// VCi traffic class
pci_or_config8(dev, 0x44, 7 << 0); // TC7
// VCi Resource Control
pci_or_config32(dev, 0x120, (1 << 31) | (1 << 24) | (0x80 << 0)); /* VCi ID and map */
/* Set Bus Master */
pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER);
// Docking not supported
pci_and_config8(dev, 0x4d, (u8)~(1 << 7)); // Docking Status
/* Lock some R/WO bits by writing their current value. */
pci_update_config32(dev, 0x74, ~0, 0);
res = find_resource(dev, PCI_BASE_ADDRESS_0);
if (!res)
return;
// NOTE this will break as soon as the Azalia get's a bar above 4G.
// Is there anything we can do about it?
base = res2mmio(res, 0, 0);
printk(BIOS_DEBUG, "Azalia: base = %p\n", base);
codec_mask = codec_detect(base);
if (codec_mask) {
printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
codecs_init(dev, base, codec_mask);
}
}
static struct device_operations azalia_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = azalia_init,
.ops_pci = &pci_dev_ops_pci,
};
static const unsigned short pci_device_ids[] = {
0x3a3e,
0x3a6e,
0
};
static const struct pci_driver i82801jx_azalia __pci_driver = {
.ops = &azalia_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
|
