1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include "chip.h"
#include "i82801gx.h"
#include "sata.h"
typedef struct southbridge_intel_i82801gx_config config_t;
static u8 get_ich7_sata_ports(void)
{
struct device *lpc;
lpc = pcidev_on_root(31, 0);
switch (pci_read_config16(lpc, PCI_DEVICE_ID)) {
case 0x27b0:
case 0x27b8:
return 0xf;
case 0x27b9:
case 0x27bd:
return 0x5;
case 0x27bc:
return 0x3;
default:
printk(BIOS_ERR, "i82801gx_sata: error: cannot determine port config\n");
return 0;
}
}
void sata_enable(struct device *dev)
{
/* Get the chip configuration */
struct southbridge_intel_i82801gx_config *config = dev->chip_info;
if (config->sata_mode == SATA_MODE_AHCI) {
/* Check if the southbridge supports AHCI */
struct device *lpc_dev = pcidev_on_root(31, 0);
if (!lpc_dev) {
/* According to the PCI spec function 0 on a bus:device
needs to be active for other functions to be enabled.
Since SATA is on the same bus:device as the LPC
bridge, it makes little sense to continue. */
die("Couldn't find the LPC device!\n");
}
const bool ahci_supported = !(pci_read_config32(lpc_dev, FDVCT)
& AHCI_UNSUPPORTED);
if (!ahci_supported) {
/* Fallback to IDE PLAIN for sata for the rest of the initialization */
config->sata_mode = SATA_MODE_IDE_PLAIN;
printk(BIOS_DEBUG, "AHCI not supported, falling back to plain mode.\n");
}
}
if (config->sata_mode == SATA_MODE_AHCI) {
/* Set map to ahci */
pci_write_config8(dev, SATA_MAP,
(pci_read_config8(dev, SATA_MAP) & ~0xc3) | 0x40);
} else {
/* Set map to ide */
pci_write_config8(dev, SATA_MAP, pci_read_config8(dev, SATA_MAP) & ~0xc3);
}
/* At this point, the new pci id will appear on the bus */
}
static void sata_init(struct device *dev)
{
u32 reg32;
u16 reg16;
u8 ports;
/* Get the chip configuration */
config_t *config = dev->chip_info;
printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n");
if (config == NULL) {
printk(BIOS_ERR, "i82801gx_sata: error: device not in devicetree.cb!\n");
return;
}
/* Get ICH7 SATA port config */
ports = get_ich7_sata_ports();
/* Enable BARs */
pci_write_config16(dev, PCI_COMMAND, 0x0007);
switch (config->sata_mode) {
case SATA_MODE_IDE_LEGACY_COMBINED:
printk(BIOS_DEBUG, "SATA controller in combined mode.\n");
/* No AHCI: clear AHCI base */
pci_write_config32(dev, PCI_BASE_ADDRESS_5, 0x00000000);
/* And without AHCI BAR no memory decoding */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
pci_write_config16(dev, PCI_COMMAND, reg16);
pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
/* Combine IDE - SATA configuration */
pci_write_config8(dev, SATA_MAP, 0x02);
/* Restrict ports - 0 and 2 only available */
ports &= 0x5;
break;
case SATA_MODE_AHCI:
printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n");
/* Allow both Legacy and Native mode */
pci_write_config8(dev, 0x09, 0x8f);
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0x0a);
struct resource *ahci_res = find_resource(dev, PCI_BASE_ADDRESS_5);
if (ahci_res != NULL)
/* write AHCI GHC_PI register */
write32(res2mmio(ahci_res, 0xc, 0), config->sata_ports_implemented);
break;
default:
case SATA_MODE_IDE_PLAIN:
printk(BIOS_DEBUG, "SATA controller in plain mode.\n");
/* Set Sata Controller Mode. No Mapping(?) */
pci_write_config8(dev, SATA_MAP, 0x00);
/* No AHCI: clear AHCI base */
pci_write_config32(dev, PCI_BASE_ADDRESS_5, 0x00000000);
/* And without AHCI BAR no memory decoding */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
pci_write_config16(dev, PCI_COMMAND, reg16);
/* Native mode capable on both primary and secondary (0xa)
* or'ed with enabled (0x50) = 0xf
*/
pci_write_config8(dev, 0x09, 0x8f);
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0xff);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_SITRE | IDE_ISP_3_CLOCKS |
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
break;
}
/* Set port control */
pci_write_config8(dev, SATA_PCS, ports);
/* Enable clock gating for unused ports and set initialization reg */
pci_write_config32(dev, SATA_IR, SIF3(ports) | SIF2 | SIF1 | SCRE);
/* All configurations need this SATA initialization sequence */
pci_write_config8(dev, 0xa0, 0x40);
pci_write_config8(dev, 0xa6, 0x22);
pci_write_config8(dev, 0xa0, 0x78);
pci_write_config8(dev, 0xa6, 0x22);
pci_write_config8(dev, 0xa0, 0x88);
reg32 = pci_read_config32(dev, 0xa4);
reg32 &= 0xc0c0c0c0;
reg32 |= 0x1b1b1212;
pci_write_config32(dev, 0xa4, reg32);
pci_write_config8(dev, 0xa0, 0x8c);
reg32 = pci_read_config32(dev, 0xa4);
reg32 &= 0xc0c0ff00;
reg32 |= 0x121200aa;
pci_write_config32(dev, 0xa4, reg32);
pci_write_config8(dev, 0xa0, 0x00);
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);
/* Sata Initialization Register */
reg32 = pci_read_config32(dev, SATA_IR);
reg32 |= SCRD; // due to some bug
pci_write_config32(dev, SATA_IR, reg32);
}
static struct pci_operations sata_pci_ops = {
.set_subsystem = pci_dev_set_subsystem,
};
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_init,
.enable = i82801gx_enable,
.ops_pci = &sata_pci_ops,
};
static const unsigned short sata_ids[] = {
0x27c0, /* Desktop Non-AHCI and Non-RAID Mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */
0x27c1, /* Desktop AHCI Mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */
0x27c4, /* Mobile Non-AHCI and Non-RAID Mode: 82801GBM/GHM (ICH7-M/ICH7-M DH) */
0x27c5, /* Mobile AHCI Mode: 82801GBM/GHM (ICH7-M/ICH7-M DH) */
/* NOTE: Any of the below are not properly supported yet. */
0x27c3, /* Desktop RAID mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */
0x27c6, /* ICH7M DH Raid Mode: 82801GHM (ICH7-M DH) */
0
};
static const struct pci_driver i82801gx_sata_driver __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = sata_ids,
};
|
