1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2003 Linux Networx
* Copyright (C) 2003 SuSE Linux AG
* Copyright (C) 2005 Tyan Computer
* (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* From 82801DBM, needs to be fixed to support everything the 82801ER does. */
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <pc80/isa-dma.h>
#include <arch/io.h>
#include "i82801bx.h"
#define NMI_OFF 0
typedef struct southbridge_intel_i82801bx_config config_t;
/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
* 0x03 - 0011 = IRQ3
* 0x04 - 0100 = IRQ4
* 0x05 - 0101 = IRQ5
* 0x06 - 0110 = IRQ6
* 0x07 - 0111 = IRQ7
* 0x08 - 1000 = Reserved
* 0x09 - 1001 = IRQ9
* 0x0A - 1010 = IRQ10
* 0x0B - 1011 = IRQ11
* 0x0C - 1100 = IRQ12
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
* 0x80 - The PIRQ is not routed.
*/
#define PIRQA 0x03
#define PIRQB 0x04
#define PIRQC 0x05
#define PIRQD 0x06
#define PIRQE 0x07
#define PIRQF 0x09
#define PIRQG 0x0A
#define PIRQH 0x0B
/*
* Use 0x0ef8 for a bitmap to cover all these IRQ's.
* Use the defined IRQ values above or set mainboard
* specific IRQ values in your mainboards Config.lb.
*/
void i82801bx_enable_apic(struct device *dev)
{
uint32_t reg32;
volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000;
volatile uint32_t *ioapic_data = (volatile uint32_t *)0xfec00010;
/* Set ACPI base address (I/O space). */
pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1));
/* Enable ACPI I/O and power management. */
pci_write_config8(dev, ACPI_CNTL, 0x10);
reg32 = pci_read_config32(dev, GEN_CNTL);
reg32 |= (3 << 7); /* Enable IOAPIC */
reg32 |= (1 << 13); /* Coprocessor error enable */
reg32 |= (1 << 1); /* Delayed transaction enable */
reg32 |= (1 << 2); /* DMA collection buffer enable */
pci_write_config32(dev, GEN_CNTL, reg32);
printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32);
*ioapic_index = 0;
*ioapic_data = (1 << 25);
*ioapic_index = 0;
reg32 = *ioapic_data;
printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32);
if (reg32 != (1 << 25))
die("APIC Error\n");
/* TODO: From i82801ca, needed/useful on other ICH? */
*ioapic_index = 3; /* Select Boot Configuration register. */
*ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */
}
void i82801bx_enable_serial_irqs(struct device *dev)
{
/* Set packet length and toggle silent mode bit. */
pci_write_config8(dev, SERIRQ_CNTL,
(1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
pci_write_config8(dev, SERIRQ_CNTL,
(1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
/* TODO: Explain/#define the real meaning of these magic numbers. */
}
static void i82801bx_pirq_init(device_t dev, uint16_t ich_model)
{
/* Get the chip configuration */
config_t *config = dev->chip_info;
if (config->pirqa_routing) {
pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
} else {
pci_write_config8(dev, PIRQA_ROUT, PIRQA);
}
if (config->pirqb_routing) {
pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
} else {
pci_write_config8(dev, PIRQB_ROUT, PIRQB);
}
if (config->pirqc_routing) {
pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
} else {
pci_write_config8(dev, PIRQC_ROUT, PIRQC);
}
if (config->pirqd_routing) {
pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
} else {
pci_write_config8(dev, PIRQD_ROUT, PIRQD);
}
/* Route PIRQE - PIRQH (for ICH2-ICH9). */
if (ich_model >= 0x2440) {
if (config->pirqe_routing) {
pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
} else {
pci_write_config8(dev, PIRQE_ROUT, PIRQE);
}
if (config->pirqf_routing) {
pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
} else {
pci_write_config8(dev, PIRQF_ROUT, PIRQF);
}
if (config->pirqg_routing) {
pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
} else {
pci_write_config8(dev, PIRQG_ROUT, PIRQG);
}
if (config->pirqh_routing) {
pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
} else {
pci_write_config8(dev, PIRQH_ROUT, PIRQH);
}
}
}
static void i82801bx_power_options(device_t dev)
{
uint8_t byte;
int pwr_on = -1;
int nmi_option;
/* power after power fail */
/* FIXME this doesn't work! */
/* Which state do we want to goto after g3 (power restored)?
* 0 == S0 Full On
* 1 == S5 Soft Off
*/
pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1);
printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off");
/* Set up NMI on errors. */
byte = inb(0x61);
byte &= ~(1 << 3); /* IOCHK# NMI Enable */
byte &= ~(1 << 2); /* PCI SERR# Enable */
outb(byte, 0x61);
byte = inb(0x70);
nmi_option = NMI_OFF;
get_option(&nmi_option, "nmi");
if (nmi_option) {
byte &= ~(1 << 7); /* Set NMI. */
outb(byte, 0x70);
}
}
static void gpio_init(device_t dev)
{
/* Set the value for GPIO base address register and enable GPIO. */
pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1));
pci_write_config8(dev, GPIO_CNTL, 0x10);
}
void i82801bx_rtc_init(struct device *dev)
{
uint8_t reg8;
uint32_t reg32;
int rtc_failed;
reg8 = pci_read_config8(dev, GEN_PMCON_3);
rtc_failed = reg8 & RTC_BATTERY_DEAD;
if (rtc_failed) {
reg8 &= ~(1 << 1); /* Preserve the power fail state. */
pci_write_config8(dev, GEN_PMCON_3, reg8);
}
reg32 = pci_read_config32(dev, GEN_STS);
rtc_failed |= reg32 & (1 << 2);
rtc_init(rtc_failed);
/* Enable access to the upper 128 byte bank of CMOS RAM. */
pci_write_config8(dev, RTC_CONF, 0x04);
}
void i82801bx_lpc_route_dma(struct device *dev, uint8_t mask)
{
uint16_t reg16;
int i;
reg16 = pci_read_config16(dev, PCI_DMA_CFG);
reg16 &= 0x300;
for (i = 0; i < 8; i++) {
if (i == 4)
continue;
reg16 |= ((mask & (1 << i)) ? 3 : 1) << (i * 2);
}
pci_write_config16(dev, PCI_DMA_CFG, reg16);
}
static void i82801bx_lpc_decode_en(device_t dev, uint16_t ich_model)
{
/* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB.
* LPT decode defaults to 0x378-0x37F and 0x778-0x77F.
* Floppy decode defaults to 0x3F0-0x3F5, 0x3F7.
* We also need to set the value for LPC I/F Enables Register.
* Note: ICH-ICH5 registers differ from ICH6-ICH9.
*/
if (ich_model <= 0x24D0) {
pci_write_config8(dev, COM_DEC, 0x10);
pci_write_config16(dev, LPC_EN_ICH0_5, 0x300F);
} else if (ich_model >= 0x2640) {
pci_write_config8(dev, LPC_IO_DEC, 0x10);
pci_write_config16(dev, LPC_EN_ICH6_9, 0x300F);
}
}
static void lpc_init(struct device *dev)
{
uint16_t ich_model = pci_read_config16(dev, PCI_DEVICE_ID);
/* Set the value for PCI command register. */
pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */
i82801bx_enable_apic(dev);
i82801bx_enable_serial_irqs(dev);
/* Setup the PIRQ. */
i82801bx_pirq_init(dev, ich_model);
/* Setup power options. */
i82801bx_power_options(dev);
/* Set the state of the GPIO lines. */
gpio_init(dev);
/* Initialize the real time clock. */
i82801bx_rtc_init(dev);
/* Route DMA. */
i82801bx_lpc_route_dma(dev, 0xff);
/* Initialize ISA DMA. */
isa_dma_init();
/* Setup decode ports and LPC I/F enables. */
i82801bx_lpc_decode_en(dev, ich_model);
}
static void i82801bx_lpc_read_resources(device_t dev)
{
struct resource *res;
/* Get the normal PCI resources of this device. */
pci_dev_read_resources(dev);
/* Add an extra subtractive resource for both memory and I/O. */
res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
res->base = 0;
res->size = 0x1000;
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
res->base = 0xff800000;
res->size = 0x00800000; /* 8 MB for flash */
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
res = new_resource(dev, 3); /* IOAPIC */
res->base = 0xfec00000;
res->size = 0x00001000;
res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
}
static struct device_operations lpc_ops = {
.read_resources = i82801bx_lpc_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = lpc_init,
.scan_bus = scan_static_bus,
.enable = i82801bx_enable,
};
static const struct pci_driver i82801aa_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2410,
};
static const struct pci_driver i82801ab_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2420,
};
static const struct pci_driver i82801ba_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2440,
};
static const struct pci_driver i82801ca_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x2480,
};
static const struct pci_driver i82801db_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24c0,
};
static const struct pci_driver i82801dbm_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24cc,
};
/* 82801EB and 82801ER */
static const struct pci_driver i82801ex_lpc __pci_driver = {
.ops = &lpc_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24d0,
};
|