blob: 45f1226bdcab7a001767bdee8f1b2d7cfe6d518e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H
#define SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H
#include <southbridge/intel/common/spi.h>
#include <stdint.h>
struct southbridge_intel_bd82x6x_config {
/**
* GPI Routing configuration
*
* Only the lower two bits have a meaning:
* 00: No effect
* 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
* 10: SCI (if corresponding GPIO_EN bit is also set)
* 11: reserved
*/
uint8_t gpi0_routing;
uint8_t gpi1_routing;
uint8_t gpi2_routing;
uint8_t gpi3_routing;
uint8_t gpi4_routing;
uint8_t gpi5_routing;
uint8_t gpi6_routing;
uint8_t gpi7_routing;
uint8_t gpi8_routing;
uint8_t gpi9_routing;
uint8_t gpi10_routing;
uint8_t gpi11_routing;
uint8_t gpi12_routing;
uint8_t gpi13_routing;
uint8_t gpi14_routing;
uint8_t gpi15_routing;
uint32_t gpe0_en;
uint16_t alt_gp_smi_en;
/* IDE configuration */
uint8_t sata_port_map;
uint32_t sata_port0_gen3_tx;
uint32_t sata_port1_gen3_tx;
/**
* SATA Interface Speed Support Configuration
*
* Only the lower two bits have a meaning:
* 00 - No effect (leave as chip default)
* 01 - 1.5 Gb/s maximum speed
* 10 - 3.0 Gb/s maximum speed
* 11 - 6.0 Gb/s maximum speed
*/
uint8_t sata_interface_speed_support;
uint32_t gen1_dec;
uint32_t gen2_dec;
uint32_t gen3_dec;
uint32_t gen4_dec;
/* Enable linear PCIe Root Port function numbers starting at zero */
uint8_t pcie_port_coalesce;
/* Override PCIe ASPM */
uint8_t pcie_aspm_f0;
uint8_t pcie_aspm_f1;
uint8_t pcie_aspm_f2;
uint8_t pcie_aspm_f3;
uint8_t pcie_aspm_f4;
uint8_t pcie_aspm_f5;
uint8_t pcie_aspm_f6;
uint8_t pcie_aspm_f7;
int c2_latency;
int docking_supported;
uint8_t pcie_hotplug_map[8];
/* Ports which can be routed to either EHCI or xHCI. */
uint32_t xhci_switchable_ports;
/* Ports which support SuperSpeed (USB 3.0 additional lanes). */
uint32_t superspeed_capable_ports;
/* Overcurrent Mapping for USB 3.0 Ports */
uint32_t xhci_overcurrent_mapping;
uint32_t spi_uvscc;
uint32_t spi_lvscc;
struct intel_swseq_spi_config spi;
};
#endif /* SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H */
|
