1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <device/pci_ehci.h>
#include <device/mmio.h>
#include "sb800.h"
static struct pci_operations lops_pci = {
.set_subsystem = pci_dev_set_subsystem,
};
static void usb_init(struct device *dev)
{
u8 byte;
u16 word;
/* 7.1 Enable OHCI0-4 and EHCI Controllers */
/* pmio 0xEF; */
/* RPR 7.2 USB S4/S5 Wake-up or PHY Power-down Support */
byte = pm_ioread(0xF0);
byte |= 1 << 0; /* A12, USB Wake from S5 not supported on the platform */
pm_iowrite(0xF0, byte);
/* RPR 7.4 Enable the USB controller to get reset by any software that generate a PCIRst# condition */
byte = pm_ioread(0xF0);
byte |= (1 << 2);
pm_iowrite(0xF0, byte);
/* RPR 7.9 Disable OHCI MSI Capability. */
word = pci_read_config16(dev, 0x40);
word |= (0x1 << 8);
pci_write_config16(dev, 0x40, word);
}
static void usb_init2(struct device *dev)
{
u32 dword;
void *usb2_bar0;
struct device *sm_dev;
sm_dev = pcidev_on_root(0x14, 0);
//rev = get_sb800_revision(sm_dev);
/* dword = pci_read_config32(dev, 0xf8); */
/* dword |= 40; */
/* pci_write_config32(dev, 0xf8, dword); */
usb2_bar0 = (void *)(pci_read_config32(dev, 0x10) & ~0xFF);
printk(BIOS_INFO, "usb2_bar0=0x%p\n", usb2_bar0);
/* RPR7.3 Enables the USB PHY auto calibration resister to match 45ohm resistance */
dword = 0x00020F00;
write32(usb2_bar0 + 0xC0, dword);
/* RPR7.8 Sets In/OUT FIFO threshold for best performance */
dword = 0x00400040;
write32(usb2_bar0 + 0xA4, dword);
/* RPR7.10 Disable EHCI MSI support */
dword = pci_read_config32(dev, 0x50);
dword |= (1 << 6);
pci_write_config32(dev, 0x50, dword);
/* RPR7.12 EHCI Async Park Mode */
dword = pci_read_config32(dev, 0x50);
dword &= ~(0xF << 8);
dword &= ~(0xF << 12);
dword |= 1 << 8;
dword |= 2 << 12;
pci_write_config32(dev, 0x50, dword);
/* RPR 6.12 EHCI Advance PHY Power Savings */
/* RPR says it is just for A12. CIMM sets it when it is above A11. */
/* But it makes the linux crash, so we skip it */
#if 0
dword = pci_read_config32(dev, 0x50);
dword |= 1 << 31;
pci_write_config32(dev, 0x50, dword);
#endif
/* Each step below causes the linux crashes. Leave them here
* for future debugging. */
#if 0
u8 byte;
u16 word;
/* RPR6.17 Disable the EHCI Dynamic Power Saving feature */
word = read32(usb2_bar0 + 0xBC);
word &= ~(1 << 12);
write16(usb2_bar0 + 0xBC, word);
/* RPR6.19 USB Controller DMA Read Delay Tolerant. */
if (rev >= REV_SB800_A14) {
byte = pci_read_config8(dev, 0x50);
byte |= (1 << 7);
pci_write_config8(dev, 0x50, byte);
}
/* RPR6.20 Async Park Mode. */
/* RPR recommends not to set these bits. */
#if 0
dword = pci_read_config32(dev, 0x50);
dword |= 1 << 23;
if (rev >= REV_SB800_A14) {
dword &= ~(1 << 2);
}
pci_write_config32(dev, 0x50, dword);
#endif
/* RPR6.22 Advance Async Enhancement */
/* RPR6.23 USB Periodic Cache Setting */
dword = pci_read_config32(dev, 0x50);
if (rev == REV_SB800_A12) {
dword |= 1 << 28; /* 6.22 */
dword |= 1 << 27; /* 6.23 */
} else if (rev >= REV_SB800_A14) {
dword |= 1 << 3;
dword &= ~(1 << 28); /* 6.22 */
dword |= 1 << 8;
dword &= ~(1 << 27); /* 6.23 */
}
printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword);
#endif
}
static struct device_operations usb_ops = {
.read_resources = pci_ehci_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = usb_init,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver usb_0_driver __pci_driver = {
.ops = &usb_ops,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB800_USB_18_0,
};
static const struct pci_driver usb_1_driver __pci_driver = {
.ops = &usb_ops,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB800_USB_18_2,
};
/* the pci id of usb ctrl 0 and 1 are the same. */
/*
* static const struct pci_driver usb_3_driver __pci_driver = {
* .ops = &usb_ops,
* .vendor = PCI_VENDOR_ID_ATI,
* .device = PCI_DEVICE_ID_ATI_SB800_USB_19_0,
* };
* static const struct pci_driver usb_4_driver __pci_driver = {
* .ops = &usb_ops,
* .vendor = PCI_VENDOR_ID_ATI,
* .device = PCI_DEVICE_ID_ATI_SB800_USB_19_1,
* };
*/
static const struct pci_driver usb_4_driver __pci_driver = {
.ops = &usb_ops,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB800_USB_20_5,
};
static struct device_operations usb_ops2 = {
.read_resources = pci_ehci_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = usb_init2,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver usb_5_driver __pci_driver = {
.ops = &usb_ops2,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB800_USB_18_2,
};
/*
* static const struct pci_driver usb_5_driver __pci_driver = {
* .ops = &usb_ops2,
* .vendor = PCI_VENDOR_ID_ATI,
* .device = PCI_DEVICE_ID_ATI_SB800_USB_19_2,
* };
*/
|
