1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
#include <delay.h>
#include "sb700.h"
#define HDA_ICII_REG 0x68
#define HDA_ICII_BUSY (1 << 0)
#define HDA_ICII_VALID (1 << 1)
static int set_bits(void *port, u32 mask, u32 val)
{
u32 dword;
int count;
/* Write (val & ~mask) to port */
val &= mask;
dword = read32(port);
dword &= ~mask;
dword |= val;
write32(port, dword);
/* Wait for readback of register to
* match what was just written to it
*/
count = 50;
do {
/* Wait 1ms based on BKDG wait time */
mdelay(1);
dword = read32(port);
dword &= mask;
} while ((dword != val) && --count);
/* Timeout occurred */
if (!count)
return -1;
return 0;
}
static u32 codec_detect(void *base)
{
u32 dword;
/* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
if (set_bits(base + 0x08, 1, 0) == -1)
goto no_codec;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
if (set_bits(base + 0x08, 1, 1) == -1)
goto no_codec;
/* Delay for 1 ms since the BKDG does */
mdelay(1);
/* Read in Codec location (BAR + 0xe)[3..0]*/
dword = read32(base + 0xe);
dword &= 0x0F;
if (!dword)
goto no_codec;
return dword;
no_codec:
/* Codec Not found */
/* Put HDA back in reset (BAR + 0x8) [0] */
set_bits(base + 0x08, 1, 0);
printk(BIOS_DEBUG, "No codec!\n");
return 0;
}
/**
* Wait 50usec for the codec to indicate it is ready
* no response would imply that the codec is non-operative
*/
static int wait_for_ready(void *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
int timeout = 50;
while(timeout--) {
u32 dword=read32(base + HDA_ICII_REG);
if (!(dword & HDA_ICII_BUSY))
return 0;
udelay(1);
}
return -1;
}
/**
* Wait 50usec for the codec to indicate that it accepted
* the previous command. No response would imply that the code
* is non-operative
*/
static int wait_for_valid(void *base)
{
/* Use a 50 usec timeout - the Linux kernel uses the
* same duration */
int timeout = 50;
while(timeout--) {
u32 dword = read32(base + HDA_ICII_REG);
if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
HDA_ICII_VALID)
return 0;
udelay(1);
}
return -1;
}
static void codec_init(void *base, int addr)
{
u32 dword;
/* 1 */
if (wait_for_ready(base) == -1)
return;
dword = (addr << 28) | 0x000f0000;
write32(base + 0x60, dword);
if (wait_for_valid(base) == -1)
return;
dword = read32(base + 0x64);
/* 2 */
printk(BIOS_DEBUG, "%x(th) codec viddid: %08x\n", addr, dword);
}
static void codecs_init(void *base, u32 codec_mask)
{
int i;
for (i = 2; i >= 0; i--) {
if (codec_mask & (1 << i))
codec_init(base, i);
}
}
static void hda_init(struct device *dev)
{
u8 byte;
u32 dword;
void *base;
struct resource *res;
u32 codec_mask;
device_t sm_dev;
/* Enable azalia - PM_io 0x59[3], no ac97 in sb700. */
byte = pm_ioread(0x59);
byte |= 1 << 3;
pm_iowrite(0x59, byte);
/* Find the SMBus */
/* FIXME: Need to find out why the call below crashes. */
/*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB700_SM, 0);*/
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
/* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */
pci_write_config32(sm_dev, 0xf8, 0x00);
pci_write_config8(sm_dev, 0xfc, 0xAA);
/* Set INTA - SMBus 0x63 [2..0] */
byte = pci_read_config8(sm_dev, 0x63);
byte &= ~0x7;
byte |= 0x0; /* INTA:0x0 - INTH:0x7 */
pci_write_config8(sm_dev, 0x63, byte);
/* Program the 2C to 0x437b1002 */
dword = 0x437b1002;
pci_write_config32(dev, 0x2c, dword);
/* Read in BAR */
/* Is this right? HDA allows for a 64-bit BAR
* but this is only setup for a 32-bit one
*/
res = find_resource(dev, 0x10);
if (!res)
return;
base = res2mmio(res, 0, 0);
printk(BIOS_DEBUG, "base = 0x%p\n", base);
codec_mask = codec_detect(base);
if (codec_mask) {
printk(BIOS_DEBUG, "codec_mask = %02x\n", codec_mask);
codecs_init(base, codec_mask);
}
}
static struct pci_operations lops_pci = {
.set_subsystem = pci_dev_set_subsystem,
};
static struct device_operations hda_audio_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = hda_init,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver hdaaudio_driver __pci_driver = {
.ops = &hda_audio_ops,
.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB700_HDA,
};
|
