1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#define IO_MEM_PORT_DECODE_ENABLE_5 0x48
#define IO_MEM_PORT_DECODE_ENABLE_6 0x4a
#define SPI_BASE_ADDRESS 0xa0
#define SPI_CONTROL_1 0xc
#define TEMPORARY_SPI_BASE_ADDRESS 0xfec10000
/*
* Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
*
* Hardware should enable LPC ROM by pin straps. This function does not
* handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
*
* The SB700 power-on default is to map 512K ROM space.
*
* Details: AMD SB700/710/750 BIOS Developer's Guide (BDG), Rev. 1.00,
* PN 43366_sb7xx_bdg_pub_1.00, June 2009, section 3.1, page 14.
*/
static void sb700_enable_rom(void)
{
u8 reg8;
u32 dword;
pci_devfn_t dev;
dev = PCI_DEV(0, 0x14, 3);
reg8 = pci_io_read_config8(dev, IO_MEM_PORT_DECODE_ENABLE_5);
if (IS_ENABLED(CONFIG_SPI_FLASH))
/* Disable decode of variable LPC ROM address ranges 1 and 2. */
reg8 &= ~((1 << 3) | (1 << 4));
else
/* Decode variable LPC ROM address ranges 1 and 2. */
reg8 |= (1 << 3) | (1 << 4);
pci_io_write_config8(dev, IO_MEM_PORT_DECODE_ENABLE_5, reg8);
/* LPC ROM address range 1: */
/* Enable LPC ROM range mirroring start at 0x000e(0000). */
pci_io_write_config16(dev, 0x68, 0x000e);
/* Enable LPC ROM range mirroring end at 0x000f(ffff). */
pci_io_write_config16(dev, 0x6a, 0x000f);
/* LPC ROM address range 2: */
/*
* Enable LPC ROM range start at:
* 0xfff8(0000): 512KB
* 0xfff0(0000): 1MB
* 0xffe0(0000): 2MB
* 0xffc0(0000): 4MB
* 0xff80(0000): 8MB
*/
pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
/* Enable LPC ROM range end at 0xffff(ffff). */
pci_io_write_config16(dev, 0x6e, 0xffff);
/* SB700 LPC Bridge 0x48.
* Turn on all LPC IO Port decode enables
*/
pci_io_write_config32(dev, 0x44, 0xffffffff);
/* SB700 LPC Bridge 0x48.
* BIT0: Port Enable for SuperIO 0x2E-0x2F
* BIT1: Port Enable for SuperIO 0x4E-0x4F
* BIT6: Port Enable for RTC IO 0x70-0x73
*/
reg8 = pci_io_read_config8(dev, IO_MEM_PORT_DECODE_ENABLE_5);
reg8 |= (1 << 0) | (1 << 1) | (1 << 6);
pci_io_write_config8(dev, IO_MEM_PORT_DECODE_ENABLE_5, reg8);
/* SB700 LPC Bridge 0x4a.
* BIT5: Port Enable for Port 0x80
*/
reg8 = pci_io_read_config8(dev, IO_MEM_PORT_DECODE_ENABLE_6);
reg8 |= (1 << 5);
pci_io_write_config8(dev, IO_MEM_PORT_DECODE_ENABLE_6, reg8);
}
static void sb700_configure_rom(void)
{
pci_devfn_t dev;
uint32_t dword;
dev = PCI_DEV(0, 0x14, 3);
if (IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_SB700_33MHZ_SPI)) {
uint32_t prev_spi_cfg;
volatile uint32_t *spi_mmio;
/* Temporarily set up SPI access to change SPI speed */
prev_spi_cfg = dword = pci_io_read_config32(dev, SPI_BASE_ADDRESS);
dword &= ~(0x7ffffff << 5); /* SPI_BaseAddr */
dword |= TEMPORARY_SPI_BASE_ADDRESS & (0x7ffffff << 5);
dword |= (0x1 << 1); /* SpiRomEnable = 1 */
pci_io_write_config32(dev, SPI_BASE_ADDRESS, dword);
spi_mmio = (void *)(TEMPORARY_SPI_BASE_ADDRESS + SPI_CONTROL_1);
dword = *spi_mmio;
dword &= ~(0x3 << 12); /* NormSpeed = 0x1 */
dword |= (0x1 << 12);
*spi_mmio = dword;
/* Restore previous SPI access */
pci_io_write_config32(dev, SPI_BASE_ADDRESS, prev_spi_cfg);
}
}
static void bootblock_southbridge_init(void)
{
sb700_enable_rom();
sb700_configure_rom();
}
|
