1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <lib.h>
#include <console.h>
#include <device/pci.h>
#include <msr.h>
#include <legacy.h>
#include <device/pci_ids.h>
#include <statictree.h>
#include <config.h>
#include "sb600.h"
static void sata_init(struct device *dev)
{
u8 byte;
u16 word;
u32 dword;
u8 *sata_bar5;
u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
struct southbridge_ati_sb600_sata_dts_config *conf;
conf = dev->device_configuration;
struct device * sm_dev;
/* SATA SMBus Disable */
/* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
/* Disable SATA SMBUS */
byte = pci_read_config8(sm_dev, 0xad);
byte |= (1 << 1);
/* Enable SATA and power saving */
byte = pci_read_config8(sm_dev, 0xad);
byte |= (1 << 0);
byte |= (1 << 5);
pci_write_config8(sm_dev, 0xad, byte);
/* Set the interrupt Mapping to INTG# */
byte = pci_read_config8(sm_dev, 0xaf);
byte = 0x6 << 2;
pci_write_config8(sm_dev, 0xaf, byte);
/* get base addresss */
sata_bar5 = (u8 *) (pci_read_config32(dev, 0x24) & ~0x3FF);
sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
sata_bar1 = pci_read_config16(dev, 0x14) & ~0x7;
sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x7;
sata_bar4 = pci_read_config16(dev, 0x20) & ~0x7;
printk(BIOS_DEBUG, "sata_bar0=%x\n", sata_bar0); /* 3030 */
printk(BIOS_DEBUG, "sata_bar1=%x\n", sata_bar1); /* 3070 */
printk(BIOS_DEBUG, "sata_bar2=%x\n", sata_bar2); /* 3040 */
printk(BIOS_DEBUG, "sata_bar3=%x\n", sata_bar3); /* 3080 */
printk(BIOS_DEBUG, "sata_bar4=%x\n", sata_bar4); /* 3000 */
printk(BIOS_DEBUG, "sata_bar5=%x\n", sata_bar5); /* e0309000 */
/* Program the 2C to 0x43801002 */
dword = 0x43801002;
pci_write_config32(dev, 0x2c, dword);
/* SERR-Enable */
word = pci_read_config16(dev, 0x04);
word |= (1 << 8);
pci_write_config16(dev, 0x04, word);
/* Dynamic power saving */
byte = pci_read_config8(dev, 0x40);
byte |= (1 << 2);
pci_write_config8(dev, 0x40, byte);
/* Set SATA Operation Mode, Set to IDE mode */
byte = pci_read_config8(dev, 0x40);
byte |= (1 << 0);
byte |= (1 << 4);
pci_write_config8(dev, 0x40, byte);
dword = 0x01018f00;
pci_write_config32(dev, 0x8, dword);
byte = pci_read_config8(dev, 0x40);
byte &= ~(1 << 0);
pci_write_config8(dev, 0x40, byte);
/* Enable the SATA watchdog counter */
byte = pci_read_config8(dev, 0x44);
byte |= (1 << 0);
pci_write_config8(dev, 0x44, byte);
/* Program the watchdog counter to 0x10 */
byte = 0x10;
pci_write_config8(dev, 0x46, byte);
/* RPR6.5 Program the PHY Global Control to 0x2C00 for A13 */
word = 0x2c00;
pci_write_config16(dev, 0x86, word);
/* RPR6.5 Program the Phy Tuning4Ports */
dword = 0x00B401D6;
pci_write_config32(dev, 0x88, dword);
pci_write_config32(dev, 0x8c, dword);
pci_write_config32(dev, 0x90, dword);
pci_write_config32(dev, 0x94, dword);
byte = 0xB8;
pci_write_config8(dev, 0xA5, byte);
pci_write_config8(dev, 0xAD, byte);
pci_write_config8(dev, 0xB5, byte);
pci_write_config8(dev, 0xBD, byte);
/* RPR 6.8 */
word = pci_read_config16(dev, 0x42);
word |= 1 << 7;
pci_write_config16(dev, 0x42, word);
/* RPR 6.9 */
dword = pci_read_config32(dev, 0x40);
dword |= 1 << 25;
pci_write_config32(dev, 0x40, dword);
/* Enable the I/O ,MM ,BusMaster access for SATA */
byte = pci_read_config8(dev, 0x4);
byte |= 7 << 0;
pci_write_config8(dev, 0x4, byte);
/* RPR6.6 SATA drive detection. Currently we detect Primary Master Device only */
/* Use BAR5+0x1A8,BAR0+0x6 for Primary Slave */
/* Use BAR5+0x228,BAR0+0x6 for Secondary Master */
/* Use BAR5+0x2A8,BAR0+0x6 for Secondary Slave */
byte = readb(sata_bar5 + 0x128);
printk(BIOS_DEBUG, "byte=%x\n", byte);
byte &= 0xF;
if (byte == 0x3) {
outb(0xA0, sata_bar0 + 0x6);
while ((inb(sata_bar0 + 0x6) != 0xA0)
|| ((inb(sata_bar0 + 0x7) & 0x88) != 0)) {
mdelay(10);
printk(BIOS_DEBUG, "0x6=%x,0x7=%x\n", inb(sata_bar0 + 0x6),
inb(sata_bar0 + 0x7));
printk(BIOS_DEBUG, "drive detection fail,trying...\n");
}
printk(BIOS_DEBUG, "Primary master device is ready\n");
} else {
printk(BIOS_DEBUG, "No Primary master SATA drive on Slot0\n");
}
/* Below is CIM InitSataLateFar */
/* Enable interrupts from the HBA */
byte = readb(sata_bar5 + 0x4);
byte |= 1 << 1;
writeb(byte, (sata_bar5 + 0x4));
/* Clear error status */
writel(0xFFFFFFFF, (sata_bar5 + 0x130));
writel(0xFFFFFFFF, (sata_bar5 + 0x1b0));
writel(0xFFFFFFFF, (sata_bar5 + 0x230));
writel(0xFFFFFFFF, (sata_bar5 + 0x2b0));
/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
/* word = 0x0000; */
/* word = pm_ioread(0x28); */
/* byte = pm_ioread(0x29); */
/* word |= byte<<8; */
/* printk(BIOS_DEBUG, "AcpiGpe0Blk addr = %x\n", word); */
/* writel(0x80000000 , word); */
}
static struct pci_operations lops_pci = {
/* .set_subsystem = pci_dev_set_subsystem, */
};
struct device_operations amd8111_ide = {
.id = {.type = DEVICE_ID_PCI,
{.pci = {.vendor = PCI_VENDOR_ID_ATI,
.device = PCI_DEVICE_ID_ATI_SB600_SATA}}},
.constructor = default_device_constructor,
.phase4_read_resources = pci_dev_read_resources,
.phase4_set_resources = pci_dev_set_resources,
.phase5_enable_resources = pci_dev_enable_resources,
.phase6_init = sata_init,
.ops_pci = &lops_pci
};
|
