1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 Samsung Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <console/uart.h>
#include <arch/io.h>
#include <boot/coreboot_tables.h>
#include "uart.h"
#include "clk.h"
#include "cpu.h"
#include "periph.h"
#include "uart.h"
#define RX_FIFO_COUNT_MASK 0xff
#define RX_FIFO_FULL_MASK (1 << 8)
#define TX_FIFO_FULL_MASK (1 << 24)
/*
* The coefficient, used to calculate the baudrate on S5P UARTs is
* calculated as
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
* 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
*/
static const int udivslot[] = {
0,
0x0080,
0x0808,
0x0888,
0x2222,
0x4924,
0x4a52,
0x54aa,
0x5555,
0xd555,
0xd5d5,
0xddd5,
0xdddd,
0xdfdd,
0xdfdf,
0xffdf,
};
static void serial_setbrg_dev(struct s5p_uart *uart)
{
u32 uclk;
u32 val;
// All UARTs share the same clock.
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / default_baudrate();
writel(val / 16 - 1, &uart->ubrdiv);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
* does not seem relevant to the exynos5420... not entirely sure
* where/if we need to worry about it here
*/
#if 0
if (s5p_uart_divslot())
writel(udivslot[val % 16], &uart->rest.slot);
else
writeb(val % 16, &uart->rest.value);
#endif
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static void exynos5_init_dev(struct s5p_uart *uart)
{
/* enable FIFOs */
writel(0x1, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
/* No interrupts, no DMA, pure polling */
writel(0x245, &uart->ucon);
serial_setbrg_dev(uart);
}
static int exynos5_uart_err_check(struct s5p_uart *uart, int op)
{
unsigned int mask;
/*
* UERSTAT
* Break Detect [3]
* Frame Err [2] : receive operation
* Parity Err [1] : receive operation
* Overrun Err [0] : receive operation
*/
if (op)
mask = 0x8;
else
mask = 0xf;
return readl(&uart->uerstat) & mask;
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
static unsigned char exynos5_uart_rx_byte(struct s5p_uart *uart)
{
/* wait for character to arrive */
while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(uart, 0))
return 0;
}
return readb(&uart->urxh) & 0xff;
}
/*
* Output a single byte to the serial port.
*/
static void exynos5_uart_tx_byte(struct s5p_uart *uart, unsigned char data)
{
/* wait for room in the tx FIFO */
while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(uart, 1))
return;
}
writeb(data, &uart->utxh);
}
uintptr_t uart_platform_base(int idx)
{
if (idx < 4)
return 0x12c00000 + idx * 0x10000;
else
return 0;
}
void uart_init(int idx)
{
struct s5p_uart *uart = uart_platform_baseptr(idx);
exynos5_init_dev(uart);
}
unsigned char uart_rx_byte(int idx)
{
struct s5p_uart *uart = uart_platform_baseptr(idx);
return exynos5_uart_rx_byte(uart);
}
void uart_tx_byte(int idx, unsigned char data)
{
struct s5p_uart *uart = uart_platform_baseptr(idx);
exynos5_uart_tx_byte(uart, data);
}
void uart_tx_flush(int idx)
{
/* Exynos5250 implements this too. */
}
#ifndef __PRE_RAM__
void uart_fill_lb(void *data)
{
struct lb_serial serial;
serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED;
serial.baseaddr = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
serial.baud = default_baudrate();
lb_add_serial(&serial, data);
lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data);
}
#endif
|
