1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <assert.h>
#include <console/console.h>
#include <device/mmio.h>
#include <gpio.h>
#include <soc/i2c.h>
#define I2C_FULL_DUTY 100
#define I2C_HALF_DUTY 50
#define I2C_ADJUSTED_DUTY 45
#define I2C_FS_START_CON 0x601
struct mtk_i2c mtk_i2c_bus_controller[] = {
[0] = {
.i2c_regs = (void *)(I2C_BASE + 0x250000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[1] = {
.i2c_regs = (void *)(I2C_BASE + 0x70000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x80),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[2] = {
.i2c_regs = (void *)(I2C_BASE + 0x71000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x100),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[3] = {
.i2c_regs = (void *)(I2C_BASE),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x280),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[4] = {
.i2c_regs = (void *)(I2C_BASE + 0x72000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x300),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[5] = {
.i2c_regs = (void *)(I2C_BASE + 0x150000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x480),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[6] = {
.i2c_regs = (void *)(I2C_BASE + 0x251000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x500),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[7] = {
.i2c_regs = (void *)(I2C_BASE + 0x50000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x580),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[8] = {
.i2c_regs = (void *)(I2C_BASE + 0x51000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x700),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
[9] = {
.i2c_regs = (void *)(I2C_BASE + 0x52000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x880),
.mt_i2c_flag = I2C_APDMA_ASYNC,
},
};
_Static_assert(ARRAY_SIZE(mtk_i2c_bus_controller) == I2C_BUS_NUMBER,
"Wrong size of mtk_i2c_bus_controller");
static const struct pad_func i2c_funcs[I2C_BUS_NUMBER][2] = {
[0] = {
PAD_FUNC_UP(SDA0, SDA0),
PAD_FUNC_UP(SCL0, SCL0),
},
[1] = {
PAD_FUNC_UP(SDA1, SDA1),
PAD_FUNC_UP(SCL1, SCL1),
},
[2] = {
PAD_FUNC_UP(SDA2, SDA2),
PAD_FUNC_UP(SCL2, SCL2),
},
[3] = {
PAD_FUNC_UP(SDA3, SDA3),
PAD_FUNC_UP(SCL3, SCL3),
},
[4] = {
PAD_FUNC_UP(SDA4, SDA4),
PAD_FUNC_UP(SCL4, SCL4),
},
[5] = {
PAD_FUNC_UP(SDA5, SDA5),
PAD_FUNC_UP(SCL5, SCL5),
},
[6] = {
PAD_FUNC_UP(SDA6, SDA6),
PAD_FUNC_UP(SCL6, SCL6),
},
[7] = {
PAD_FUNC_UP(SDA7, SDA7),
PAD_FUNC_UP(SCL7, SCL7),
},
[8] = {
PAD_FUNC_UP(SDA8, SDA8),
PAD_FUNC_UP(SCL8, SCL8),
},
[9] = {
PAD_FUNC_UP(SDA9, SDA9),
PAD_FUNC_UP(SCL9, SCL9),
},
};
static void mtk_i2c_set_gpio_pinmux(uint8_t bus)
{
assert(bus < I2C_BUS_NUMBER);
const struct pad_func *ptr = i2c_funcs[bus];
for (size_t i = 0; i < 2; i++) {
gpio_set_mode(ptr[i].gpio, ptr[i].func);
gpio_set_pull(ptr[i].gpio, GPIO_PULL_ENABLE, ptr[i].select);
}
}
static void mtk_i2c_speed_init_soc(uint8_t bus)
{
uint8_t step_div;
const uint8_t clock_div = 5;
const uint8_t sample_div = 1;
uint32_t i2c_freq;
uint32_t tar_speed = 400;
uint32_t tar_speed_high;
uint32_t tar_speed_low;
assert(bus < I2C_BUS_NUMBER);
/* Adjust ratio of high/low level */
tar_speed_high = tar_speed * I2C_HALF_DUTY / I2C_ADJUSTED_DUTY;
/* Calculate i2c frequency */
step_div = DIV_ROUND_UP(I2C_CLK_HZ,
(tar_speed_high * KHz * sample_div * 2) * clock_div);
i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2 * clock_div);
assert(sample_div < 8 && step_div < 64 &&
i2c_freq <= tar_speed_high * KHz &&
i2c_freq >= (tar_speed_high - 20) * KHz);
/* Init i2c bus timing register */
write32(&mtk_i2c_bus_controller[bus].i2c_regs->timing,
(sample_div - 1) << 8 | (step_div - 1));
/* Adjust ratio of high/low level */
tar_speed_low = tar_speed * I2C_HALF_DUTY /
(I2C_FULL_DUTY - I2C_ADJUSTED_DUTY);
/* Calculate i2c frequency */
step_div = DIV_ROUND_UP(I2C_CLK_HZ,
(tar_speed_low * KHz * sample_div * 2) * clock_div);
i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2 * clock_div);
assert(sample_div < 8 && step_div < 64 &&
i2c_freq <= tar_speed_low * KHz &&
i2c_freq >= (tar_speed_low - 20) * KHz);
write32(&mtk_i2c_bus_controller[bus].i2c_regs->ltiming,
(sample_div - 1) << 6 | (step_div - 1));
/* Init i2c bus clock_div register */
write32(&mtk_i2c_bus_controller[bus].i2c_regs->clock_div,
clock_div - 1);
/* Adjust tSU,STA/tHD,STA/tSU,STO */
write32(&mtk_i2c_bus_controller[bus].i2c_regs->ext_conf, I2C_FS_START_CON);
}
void mtk_i2c_bus_init(uint8_t bus)
{
mtk_i2c_speed_init_soc(bus);
mtk_i2c_set_gpio_pinmux(bus);
}
void mtk_i2c_dump_more_info(struct mt_i2c_regs *regs)
{
printk(BIOS_DEBUG, "LTIMING %x\nCLK_DIV %x\n",
read32(®s->ltiming),
read32(®s->clock_div));
}
|
