1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <assert.h>
#include <console/console.h>
#include <delay.h>
#include <device/i2c_simple.h>
#include <symbols.h>
#include <timer.h>
#include <device/mmio.h>
#include <soc/addressmap.h>
#include <soc/i2c.h>
#include <device/mmio.h>
#include <soc/pll.h>
#include <soc/i2c.h>
#define I2C_CLK_HZ (AXI_HZ / 16)
struct mtk_i2c mtk_i2c_bus_controller[7] = {
/* i2c0 setting */
{
.i2c_regs = (void *)I2C_BASE,
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x80),
},
/* i2c1 setting */
{
.i2c_regs = (void *)(I2C_BASE + 0x1000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x100),
},
/* i2c2 setting */
{
.i2c_regs = (void *)(I2C_BASE + 0x2000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x180),
},
/* i2c3 setting */
{
.i2c_regs = (void *)(I2C_BASE + 0x9000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x200),
},
/* i2c4 setting */
{
.i2c_regs = (void *)(I2C_BASE + 0xa000),
.i2c_dma_regs = (void *)(I2C_DMA_BASE + 0x280),
},
/* i2c5 is reserved for internal use. */
{
},
/* i2c6 setting */
{
.i2c_regs = (void *)(I2C_BASE + 0xc000),
.i2c_dma_regs = (void *)I2C_DMA_BASE,
}
};
#define I2CTAG "[I2C][PL] "
#if CONFIG(DEBUG_I2C)
#define I2CLOG(fmt, arg...) printk(BIOS_INFO, I2CTAG fmt, ##arg)
#else
#define I2CLOG(fmt, arg...)
#endif /* CONFIG_DEBUG_I2C */
#define I2CERR(fmt, arg...) printk(BIOS_ERR, I2CTAG fmt, ##arg)
void mtk_i2c_bus_init(uint8_t bus)
{
uint8_t step_div;
uint32_t i2c_freq;
const uint8_t sample_div = 1;
assert(bus < ARRAY_SIZE(mtk_i2c_bus_controller));
/* Calculate i2c frequency */
step_div = DIV_ROUND_UP(I2C_CLK_HZ, (400 * KHz * sample_div * 2));
i2c_freq = I2C_CLK_HZ / (step_div * sample_div * 2);
assert(sample_div < 8 && step_div < 64 && i2c_freq < 400 * KHz &&
i2c_freq >= 380 * KHz);
/* Init i2c bus Timing register */
write32(&mtk_i2c_bus_controller[bus].i2c_regs->timing,
(sample_div - 1) << 8 | (step_div - 1));
}
|
