1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2019 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Helper functions for dealing with power management registers
* and the differences between PCH variants.
*/
/*
* This file is created based on Intel Tiger Lake Processor PCH Datasheet
* Document number: 575857
* Chapter number: 4
*/
#define __SIMPLE_DEVICE__
#include <device/mmio.h>
#include <cbmem.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_def.h>
#include <console/console.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <intelblocks/tco.h>
#include <soc/espi.h>
#include <soc/gpe.h>
#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/smbus.h>
#include <soc/soc_chip.h>
#include <security/vboot/vbnv.h>
/*
* SMI
*/
const char *const *soc_smi_sts_array(size_t *a)
{
static const char *const smi_sts_bits[] = {
[BIOS_STS_BIT] = "BIOS",
[LEGACY_USB_STS_BIT] = "LEGACY_USB",
[SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI",
[APM_STS_BIT] = "APM",
[SWSMI_TMR_STS_BIT] = "SWSMI_TMR",
[PM1_STS_BIT] = "PM1",
[GPE0_STS_BIT] = "GPE0",
[GPIO_STS_BIT] = "GPI",
[MCSMI_STS_BIT] = "MCSMI",
[DEVMON_STS_BIT] = "DEVMON",
[TCO_STS_BIT] = "TCO",
[PERIODIC_STS_BIT] = "PERIODIC",
[SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI",
[SMBUS_SMI_STS_BIT] = "SMBUS_SMI",
[PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI",
[MONITOR_STS_BIT] = "MONITOR",
[SPI_SMI_STS_BIT] = "SPI",
[GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK",
[ESPI_SMI_STS_BIT] = "ESPI_SMI",
};
*a = ARRAY_SIZE(smi_sts_bits);
return smi_sts_bits;
}
/*
* TCO
*/
const char *const *soc_tco_sts_array(size_t *a)
{
static const char *const tco_sts_bits[] = {
[0] = "NMI2SMI",
[1] = "SW_TCO",
[2] = "TCO_INT",
[3] = "TIMEOUT",
[7] = "NEWCENTURY",
[8] = "BIOSWR",
[9] = "DMISCI",
[10] = "DMISMI",
[12] = "DMISERR",
[13] = "SLVSEL",
[16] = "INTRD_DET",
[17] = "SECOND_TO",
[18] = "BOOT",
[20] = "SMLINK_SLV"
};
*a = ARRAY_SIZE(tco_sts_bits);
return tco_sts_bits;
}
/*
* GPE0
*/
const char *const *soc_std_gpe_sts_array(size_t *a)
{
static const char *const gpe_sts_bits[] = {
[1] = "HOTPLUG",
[2] = "SWGPE",
[6] = "TCO_SCI",
[7] = "SMB_WAK",
[9] = "PCI_EXP",
[10] = "BATLOW",
[11] = "PME",
[12] = "ME",
[13] = "PME_B0",
[14] = "eSPI",
[15] = "GPIO Tier-2",
[16] = "LAN_WAKE",
[18] = "WADT"
};
*a = ARRAY_SIZE(gpe_sts_bits);
return gpe_sts_bits;
}
void pmc_set_disb(void)
{
/* Set the DISB after DRAM init */
uint8_t disb_val;
/* Only care about bits [23:16] of register GEN_PMCON_A */
uint8_t *addr = (uint8_t *)(pmc_mmio_regs() + GEN_PMCON_A + 2);
disb_val = read8(addr);
disb_val |= (DISB >> 16);
/* Don't clear bits that are write-1-to-clear */
disb_val &= ~((MS4V | SUS_PWR_FLR) >> 16);
write8(addr, disb_val);
}
void pmc_clear_pmcon_sts(void)
{
uint32_t reg_val;
uint8_t *addr;
addr = pmc_mmio_regs();
reg_val = read32(addr + GEN_PMCON_A);
/* Clear SUS_PWR_FLR, GBL_RST_STS, HOST_RST_STS, PWR_FLR bits
* while retaining MS4V write-1-to-clear bit */
reg_val &= ~(MS4V);
write32((addr + GEN_PMCON_A), reg_val);
}
/*
* PMC controller gets hidden from PCI bus
* during FSP-Silicon init call. Hence PWRMBASE
* can't be accessible using PCI configuration space
* read/write.
*/
uint8_t *pmc_mmio_regs(void)
{
return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
}
uintptr_t soc_read_pmc_base(void)
{
return (uintptr_t)pmc_mmio_regs();
}
uint32_t *soc_pmc_etr_addr(void)
{
return (uint32_t *)(soc_read_pmc_base() + ETR);
}
void soc_get_gpi_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2)
{
DEVTREE_CONST struct soc_intel_tigerlake_config *config;
config = config_of_soc();
/* Assign to out variable */
*dw0 = config->pmc_gpe0_dw0;
*dw1 = config->pmc_gpe0_dw1;
*dw2 = config->pmc_gpe0_dw2;
}
static int rtc_failed(uint32_t gen_pmcon_b)
{
return !!(gen_pmcon_b & RTC_BATTERY_DEAD);
}
int soc_get_rtc_failed(void)
{
const struct chipset_power_state *ps = cbmem_find(CBMEM_ID_POWER_STATE);
if (!ps) {
printk(BIOS_ERR, "Could not find power state in cbmem, RTC init aborted\n");
return 1;
}
return rtc_failed(ps->gen_pmcon_b);
}
int vbnv_cmos_failed(void)
{
return rtc_failed(read32(pmc_mmio_regs() + GEN_PMCON_B));
}
static inline int deep_s3_enabled(void)
{
uint32_t deep_s3_pol;
deep_s3_pol = read32(pmc_mmio_regs() + S3_PWRGATE_POL);
return !!(deep_s3_pol & (S3DC_GATE_SUS | S3AC_GATE_SUS));
}
/* Return 0, 3, or 5 to indicate the previous sleep state. */
int soc_prev_sleep_state(const struct chipset_power_state *ps,
int prev_sleep_state)
{
/*
* Check for any power failure to determine if this a wake from
* S5 because the PCH does not set the WAK_STS bit when waking
* from a true G3 state.
*/
if (ps->gen_pmcon_a & (PWR_FLR | SUS_PWR_FLR))
prev_sleep_state = ACPI_S5;
/*
* If waking from S3 determine if deep S3 is enabled. If not,
* need to check both deep sleep well and normal suspend well.
* Otherwise just check deep sleep well.
*/
if (prev_sleep_state == ACPI_S3) {
/* PWR_FLR represents deep sleep power well loss. */
uint32_t mask = PWR_FLR;
/* If deep s3 isn't enabled check the suspend well too. */
if (!deep_s3_enabled())
mask |= SUS_PWR_FLR;
if (ps->gen_pmcon_a & mask)
prev_sleep_state = ACPI_S5;
}
return prev_sleep_state;
}
void soc_fill_power_state(struct chipset_power_state *ps)
{
uint8_t *pmc;
ps->tco1_sts = tco_read_reg(TCO1_STS);
ps->tco2_sts = tco_read_reg(TCO2_STS);
printk(BIOS_DEBUG, "TCO_STS: %04x %04x\n",
ps->tco1_sts, ps->tco2_sts);
pmc = pmc_mmio_regs();
ps->gen_pmcon_a = read32(pmc + GEN_PMCON_A);
ps->gen_pmcon_b = read32(pmc + GEN_PMCON_B);
ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0);
ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1);
printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n",
ps->gen_pmcon_a, ps->gen_pmcon_b);
printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n",
ps->gblrst_cause[0], ps->gblrst_cause[1]);
}
|