1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* This file is created based on Intel Tiger Lake Processor PCH Datasheet
* Document number: 575857
* Chapter number: 2
*/
#include <device/device.h>
#include <device/pci.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <arch/ioapic.h>
#include <intelblocks/itss.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
#include <reg_script.h>
#include <soc/espi.h>
#include <soc/iomap.h>
#include <soc/irq.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/soc_chip.h>
/*
* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
* certain memory range as reserved range for BIOS usage.
* For this SOC, the range will be from 0FC800000h till FE7FFFFFh"
*/
static const struct lpc_mmio_range tgl_lpc_fixed_mmio_ranges[] = {
{ PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE },
{ 0, 0 }
};
const struct lpc_mmio_range *soc_get_fixed_mmio_ranges()
{
return tgl_lpc_fixed_mmio_ranges;
}
void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec)
{
const config_t *config = config_of(dev);
gen_io_dec[0] = config->gen1_dec;
gen_io_dec[1] = config->gen2_dec;
gen_io_dec[2] = config->gen3_dec;
gen_io_dec[3] = config->gen4_dec;
}
void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec)
{
/* Mirror these same settings in DMI PCR */
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
}
#if ENV_RAMSTAGE
static void soc_mirror_dmi_pcr_io_dec(void)
{
struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0);
uint32_t io_dec_arr[] = {
pci_read_config32(dev, ESPI_GEN1_DEC),
pci_read_config32(dev, ESPI_GEN2_DEC),
pci_read_config32(dev, ESPI_GEN3_DEC),
pci_read_config32(dev, ESPI_GEN4_DEC),
};
/* Mirror these same settings in DMI PCR */
soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]);
}
static void pch_enable_ioapic(const struct device *dev)
{
u32 reg32;
/* PCH-LP has 120 redirection entries */
const int redir_entries = 120;
set_ioapic_id((void *)IO_APIC_ADDR, 0x02);
/* affirm full set of redirection table entries ("write once") */
reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
reg32 &= ~0x00ff0000;
reg32 |= (redir_entries - 1) << 16;
io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
/*
* Select Boot Configuration register (0x03) and
* use Processor System Bus (0x01) to deliver interrupts.
*/
io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
}
/*
* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
* 0x00 - 0000 = Reserved
* 0x01 - 0001 = Reserved
* 0x02 - 0010 = Reserved
* 0x03 - 0011 = IRQ3
* 0x04 - 0100 = IRQ4
* 0x05 - 0101 = IRQ5
* 0x06 - 0110 = IRQ6
* 0x07 - 0111 = IRQ7
* 0x08 - 1000 = Reserved
* 0x09 - 1001 = IRQ9
* 0x0A - 1010 = IRQ10
* 0x0B - 1011 = IRQ11
* 0x0C - 1100 = IRQ12
* 0x0D - 1101 = Reserved
* 0x0E - 1110 = IRQ14
* 0x0F - 1111 = IRQ15
* PIRQ[n]_ROUT[7] - PIRQ Routing Control
* 0x80 - The PIRQ is not routed.
*/
void soc_pch_pirq_init(const struct device *dev)
{
struct device *irq_dev;
uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG];
pch_interrupt_routing[0] = PCH_IRQ11;
pch_interrupt_routing[1] = PCH_IRQ10;
pch_interrupt_routing[2] = PCH_IRQ11;
pch_interrupt_routing[3] = PCH_IRQ11;
pch_interrupt_routing[4] = PCH_IRQ11;
pch_interrupt_routing[5] = PCH_IRQ11;
pch_interrupt_routing[6] = PCH_IRQ11;
pch_interrupt_routing[7] = PCH_IRQ11;
itss_irq_init(pch_interrupt_routing);
for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
u8 int_pin = 0, int_line = 0;
if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
continue;
int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
switch (int_pin) {
case 1: /* INTA# */
int_line = PCH_IRQ11;
break;
case 2: /* INTB# */
int_line = PCH_IRQ10;
break;
case 3: /* INTC# */
int_line = PCH_IRQ11;
break;
case 4: /* INTD# */
int_line = PCH_IRQ11;
break;
}
if (!int_line)
continue;
pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
}
}
static void pch_misc_init(void)
{
uint8_t reg8;
/* Setup NMI on errors, disable SERR */
reg8 = (inb(0x61)) & 0xf0;
outb((reg8 | (1 << 2)), 0x61);
/* Disable NMI sources */
outb((1 << 7), 0x70);
};
void lpc_soc_init(struct device *dev)
{
/* Legacy initialization */
isa_dma_init();
pch_misc_init();
/* Enable CLKRUN_EN for power gating ESPI */
lpc_enable_pci_clk_cntl();
/* Set ESPI Serial IRQ mode */
if (CONFIG(SERIRQ_CONTINUOUS_MODE))
lpc_set_serirq_mode(SERIRQ_CONTINUOUS);
else
lpc_set_serirq_mode(SERIRQ_QUIET);
/* Interrupt configuration */
pch_enable_ioapic(dev);
soc_pch_pirq_init(dev);
setup_i8259();
i8259_configure_irq_trigger(9, 1);
soc_mirror_dmi_pcr_io_dec();
}
/* Fill up ESPI IO resource structure inside SoC directory */
void pch_lpc_soc_fill_io_resources(struct device *dev)
{
/*
* PMC pci device gets hidden from PCI bus due to Silicon
* policy hence bind ACPI BASE aka ABASE (offset 0x20) with
* ESPI IO resources to ensure that ABASE falls under PCI reserved
* IO memory range.
*
* Note: Don't add any more resource with same offset 0x20
* under this device space.
*/
pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4,
ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED);
}
#endif
|
