1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
/*
* This file is created based on Intel Tiger Lake Processor CPU Datasheet
* Document number: 575683
* Chapter number: 15
*/
#include <arch/cpu.h>
#include <console/console.h>
#include <device/pci.h>
#include <cpu/x86/lapic.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/smm_reloc.h>
#include <cpu/intel/turbo.h>
#include <fsp/api.h>
#include <intelblocks/cpulib.h>
#include <intelblocks/mp_init.h>
#include <intelblocks/msr.h>
#include <romstage_handoff.h>
#include <soc/cpu.h>
#include <soc/msr.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/soc_chip.h>
static void soc_fsp_load(void)
{
fsps_load(romstage_handoff_is_resume());
}
static void configure_isst(void)
{
config_t *conf = config_of_soc();
msr_t msr;
if (conf->speed_shift_enable) {
/*
* Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
* is supported or not. coreboot needs to configure MSR 0x1AA
* which is then reflected in the CPUID register.
*/
msr = rdmsr(MSR_MISC_PWR_MGMT);
msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
wrmsr(MSR_MISC_PWR_MGMT, msr);
} else {
msr = rdmsr(MSR_MISC_PWR_MGMT);
msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
wrmsr(MSR_MISC_PWR_MGMT, msr);
}
}
static void configure_misc(void)
{
msr_t msr;
config_t *conf = config_of_soc();
msr = rdmsr(IA32_MISC_ENABLE);
msr.lo |= (1 << 0); /* Fast String enable */
msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
wrmsr(IA32_MISC_ENABLE, msr);
/* Set EIST status */
cpu_set_eist(conf->eist_enable);
/* Disable Thermal interrupts */
msr.lo = 0;
msr.hi = 0;
wrmsr(IA32_THERM_INTERRUPT, msr);
/* Enable package critical interrupt only */
msr.lo = 1 << 4;
msr.hi = 0;
wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
/* Enable PROCHOT */
msr = rdmsr(MSR_POWER_CTL);
msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
msr.lo |= (1 << 23); /* Lock it */
wrmsr(MSR_POWER_CTL, msr);
}
static void enable_lapic_tpr(void)
{
msr_t msr;
msr = rdmsr(MSR_PIC_MSG_CONTROL);
msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
wrmsr(MSR_PIC_MSG_CONTROL, msr);
}
static void configure_dca_cap(void)
{
uint32_t feature_flag;
msr_t msr;
/* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
feature_flag = cpu_get_feature_flags_ecx();
if (feature_flag & CPUID_DCA) {
msr = rdmsr(IA32_PLATFORM_DCA_CAP);
msr.lo |= 1;
wrmsr(IA32_PLATFORM_DCA_CAP, msr);
}
}
static void enable_pm_timer_emulation(void)
{
/* ACPI PM timer emulation */
msr_t msr;
/*
* The derived frequency is calculated as follows:
* (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
* Back solve the multiplier so the 3.579545MHz ACPI timer
* frequency is used.
*/
msr.hi = (3579545ULL << 32) / CTC_FREQ;
/* Set PM1 timer IO port and enable */
msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
wrmsr(MSR_EMULATE_PM_TIMER, msr);
}
static void set_energy_perf_bias(u8 policy)
{
msr_t msr;
int ecx;
/* Determine if energy efficient policy is supported. */
ecx = cpuid_ecx(0x6);
if (!(ecx & (1 << 3)))
return;
/* Energy Policy is bits 3:0 */
msr = rdmsr(IA32_ENERGY_PERF_BIAS);
msr.lo &= ~0xf;
msr.lo |= policy & 0xf;
wrmsr(IA32_ENERGY_PERF_BIAS, msr);
}
/* All CPUs including BSP will run the following function. */
void soc_core_init(struct device *cpu)
{
/* Clear out pending MCEs */
/* TODO(adurbin): This should only be done on a cold boot. Also, some
* of these banks are core vs package scope. For now every CPU clears
* every bank. */
mca_configure();
/* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
/* Configure Intel Speed Shift */
configure_isst();
/* Enable PM timer emulation */
enable_pm_timer_emulation();
/* Enable Direct Cache Access */
configure_dca_cap();
/* Set energy policy */
set_energy_perf_bias(ENERGY_POLICY_NORMAL);
/* Enable Turbo */
enable_turbo();
}
static void per_cpu_smm_trigger(void)
{
/* Relocate the SMM handler. */
smm_relocate();
}
static void post_mp_init(void)
{
/* Set Max Ratio */
cpu_set_max_ratio();
/*
* Now that all APs have been relocated as well as the BSP let SMIs
* start flowing.
*/
smm_southbridge_enable(PWRBTN_EN | GBL_EN);
/* Lock down the SMRAM space. */
smm_lock();
}
static const struct mp_ops mp_ops = {
/*
* Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
* that are set prior to ramstage.
* Real MTRRs programming are being done after resource allocation.
*/
.pre_mp_init = soc_fsp_load,
.get_cpu_count = get_cpu_count,
.get_smm_info = smm_info,
.get_microcode_info = get_microcode_info,
.pre_mp_smm_init = smm_initialize,
.per_cpu_smm_trigger = per_cpu_smm_trigger,
.relocation_handler = smm_relocation_handler,
.post_mp_init = post_mp_init,
};
void soc_init_cpus(struct bus *cpu_bus)
{
if (mp_init_with_smm(cpu_bus, &mp_ops))
printk(BIOS_ERR, "MP initialization failure.\n");
}
|
