1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <bootstate.h>
#include <console/console.h>
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <intelblocks/pmc.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <static.h>
#include "chip.h"
/* Fill up PMC resource structure */
int pmc_soc_get_resources(struct pmc_resource_config *cfg)
{
cfg->pwrmbase_offset = PWRMBASE;
cfg->pwrmbase_addr = PCH_PWRM_BASE_ADDRESS;
cfg->pwrmbase_size = PCH_PWRM_BASE_SIZE;
cfg->abase_offset = ABASE;
cfg->abase_addr = ACPI_BASE_ADDRESS;
cfg->abase_size = ACPI_BASE_SIZE;
return 0;
}
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
printk(BIOS_DEBUG, "%sabling Deep S%c\n",
enable ? "En" : "Dis", sx + '0');
reg = read32(pmcbase + offset);
if (enable)
reg |= mask;
else
reg &= ~mask;
write32(pmcbase + offset, reg);
}
static void config_deep_s5(int on_ac, int on_dc)
{
/* Treat S4 the same as S5. */
config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
}
static void config_deep_s3(int on_ac, int on_dc)
{
config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
}
static void config_deep_sx(uint32_t deepsx_config)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
reg = read32(pmcbase + DSX_CFG);
reg &= ~DSX_CFG_MASK;
reg |= deepsx_config;
write32(pmcbase + DSX_CFG, reg);
}
void pmc_soc_init(struct device *dev)
{
const config_t *config = config_of(dev);
uint8_t *const pwrmbase = pmc_mmio_regs();
uint32_t reg32;
rtc_init();
pmc_set_power_failure_state(true);
pmc_gpe_init();
/* SLP_S4=4s, SLP_S3=50ms, disable SLP_X stretching after SUS loss. */
pci_update_config32(dev, GEN_PMCON_B, ~(S4MAW_MASK | SLP_S3_MIN_ASST_WDTH_MASK),
S4MAW_4S | SLP_S3_MIN_ASST_WDTH_50MS | DIS_SLP_X_STRCH_SUS_UP);
/* Enable SCI and clear SLP requests. */
reg32 = inl(ACPI_BASE_ADDRESS + PM1_CNT);
reg32 &= ~SLP_TYP;
reg32 |= SCI_EN;
outl(reg32, ACPI_BASE_ADDRESS + PM1_CNT);
pmc_set_acpi_mode();
config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
config_deep_sx(config->deep_sx_config);
/* Clear registers that contain write-1-to-clear bits. */
pci_or_config32(dev, GEN_PMCON_B, 0);
pci_or_config32(dev, GEN_PMCON_B, 0);
setbits32(pwrmbase + GBLRST_CAUSE0, 0);
setbits32(pwrmbase + GBLRST_CAUSE1, 0);
/*
* Disable ACPI PM timer based on Kconfig
*
* Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
* Disabling ACPI PM timer also switches off TCO.
*/
if (!CONFIG(USE_PM_ACPI_TIMER))
setbits8(pmc_mmio_regs() + PCH_PWRM_ACPI_TMR_CTL, ACPI_TIM_DIS);
}
static void pm1_enable_pwrbtn_smi(void *unused)
{
/*
* Enable power button SMI only before jumping to payload. This ensures
* that:
* 1. Power button SMI is enabled only after coreboot is done.
* 2. On resume path, power button SMI is not enabled and thus avoids
* any shutdowns because of power button presses due to power button
* press in resume path.
*/
pmc_update_pm1_enable(PWRBTN_EN);
}
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, pm1_enable_pwrbtn_smi, NULL);
/*
* Check if WAKE# pin is enabled based on DSX_EN_WAKE_PIN setting in
* deep_sx_config. If WAKE# pin is not enabled, then PCI Express Wake Disable
* bit needs to be set in PM1_EN to avoid unnecessary wakes caused by WAKE#
* pin.
*/
static void pm1_handle_wake_pin(void *unused)
{
const config_t *conf = config_of_soc();
/* If WAKE# pin is enabled, bail out early. */
if (conf->deep_sx_config & DSX_EN_WAKE_PIN)
return;
pmc_update_pm1_enable(PCIEXPWAK_DIS);
}
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, pm1_handle_wake_pin, NULL);
BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, pm1_handle_wake_pin, NULL);
|
