1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
* Copyright (C) 2015-2017 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <bootstate.h>
#include <chip.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci_ops.h>
#include <intelblocks/pmc.h>
#include <intelblocks/pmclib.h>
#include <intelblocks/rtc.h>
#include <reg_script.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
void pmc_set_disb(void)
{
/* Set the DISB after DRAM init */
u32 disb_val;
device_t dev = PCH_DEV_PMC;
disb_val = pci_read_config32(dev, GEN_PMCON_A);
disb_val |= DISB;
/* Don't clear bits that are write-1-to-clear */
disb_val &= ~(GBL_RST_STS | MS4V);
pci_write_config32(dev, GEN_PMCON_A, disb_val);
}
#if ENV_RAMSTAGE
/* Fill up PMC resource structure */
int pmc_soc_get_resources(struct pmc_resource_config *cfg)
{
cfg->pwrmbase_offset = PWRMBASE;
cfg->pwrmbase_addr = PCH_PWRM_BASE_ADDRESS;
cfg->pwrmbase_size = PCH_PWRM_BASE_SIZE;
cfg->abase_offset = ABASE;
cfg->abase_addr = ACPI_BASE_ADDRESS;
cfg->abase_size = ACPI_BASE_SIZE;
return 0;
}
static const struct reg_script pch_pmc_misc_init_script[] = {
/* SLP_S4=4s, SLP_S3=50ms, disable SLP_X stretching after SUS loss. */
REG_PCI_RMW16(GEN_PMCON_B,
~(S4MAW_MASK | SLP_S3_MIN_ASST_WDTH_MASK),
S4MAW_4S | SLP_S3_MIN_ASST_WDTH_50MS |
DIS_SLP_X_STRCH_SUS_UP),
/* Enable SCI and clear SLP requests. */
REG_IO_RMW32(ACPI_BASE_ADDRESS + PM1_CNT, ~SLP_TYP, SCI_EN),
REG_SCRIPT_END
};
static const struct reg_script pmc_write1_to_clear_script[] = {
REG_PCI_OR32(GEN_PMCON_A, 0),
REG_PCI_OR32(GEN_PMCON_B, 0),
REG_PCI_OR32(GEN_PMCON_B, 0),
REG_RES_OR32(PWRMBASE, GBLRST_CAUSE0, 0),
REG_RES_OR32(PWRMBASE, GBLRST_CAUSE1, 0),
REG_SCRIPT_END
};
/*
* Set which power state system will be after reapplying
* the power (from G3 State)
*/
static void pmc_set_afterg3(struct device *dev, int s5pwr)
{
uint8_t reg8;
reg8 = pci_read_config8(dev, GEN_PMCON_B);
switch (s5pwr) {
case MAINBOARD_POWER_STATE_OFF:
reg8 |= 1;
break;
case MAINBOARD_POWER_STATE_ON:
reg8 &= ~1;
break;
case MAINBOARD_POWER_STATE_PREVIOUS:
default:
break;
}
pci_write_config8(dev, GEN_PMCON_B, reg8);
}
static void pch_power_options(struct device *dev)
{
const char *state;
/* Get the chip configuration */
int pwr_on = pmc_get_mainboard_power_failure_state_choice();
/*
* Which state do we want to goto after g3 (power restored)?
* 0 == S5 Soft Off
* 1 == S0 Full On
* 2 == Keep Previous State
*/
switch (pwr_on) {
case MAINBOARD_POWER_STATE_OFF:
state = "off";
break;
case MAINBOARD_POWER_STATE_ON:
state = "on";
break;
case MAINBOARD_POWER_STATE_PREVIOUS:
state = "state keep";
break;
default:
state = "undefined";
}
pmc_set_afterg3(dev, pwr_on);
printk(BIOS_INFO, "Set power %s after power failure.\n", state);
/* Set up GPE configuration. */
pmc_gpe_init();
}
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
printk(BIOS_DEBUG, "%sabling Deep S%c\n",
enable ? "En" : "Dis", sx + '0');
reg = read32(pmcbase + offset);
if (enable)
reg |= mask;
else
reg &= ~mask;
write32(pmcbase + offset, reg);
}
static void config_deep_s5(int on_ac, int on_dc)
{
/* Treat S4 the same as S5. */
config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac);
config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc);
config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac);
config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc);
}
static void config_deep_s3(int on_ac, int on_dc)
{
config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac);
config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc);
}
static void config_deep_sx(uint32_t deepsx_config)
{
uint32_t reg;
uint8_t *pmcbase = pmc_mmio_regs();
reg = read32(pmcbase + DSX_CFG);
reg &= ~DSX_CFG_MASK;
reg |= deepsx_config;
write32(pmcbase + DSX_CFG, reg);
}
void pmc_soc_init(struct device *dev)
{
const config_t *config = dev->chip_info;
rtc_init();
/* Initialize power management */
pch_power_options(dev);
/* Note that certain bits may be cleared from running script as
* certain bit fields are write 1 to clear. */
reg_script_run_on_dev(dev, pch_pmc_misc_init_script);
pmc_set_acpi_mode();
config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc);
config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc);
config_deep_sx(config->deep_sx_config);
/* Clear registers that contain write-1-to-clear bits. */
reg_script_run_on_dev(dev, pmc_write1_to_clear_script);
}
/*
* Set PMC register to know which state system should be after
* power reapplied
*/
void pmc_soc_restore_power_failure(void)
{
pmc_set_afterg3(PCH_DEV_PMC,
pmc_get_mainboard_power_failure_state_choice());
}
static void pm1_enable_pwrbtn_smi(void *unused)
{
/*
* Enable power button SMI only before jumping to payload. This ensures
* that:
* 1. Power button SMI is enabled only after coreboot is done.
* 2. On resume path, power button SMI is not enabled and thus avoids
* any shutdowns because of power button presses due to power button
* press in resume path.
*/
pmc_update_pm1_enable(PWRBTN_EN);
}
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, pm1_enable_pwrbtn_smi, NULL);
#endif
|
