1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/device.h>
#include <device/pci.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <arch/ioapic.h>
#include <intelblocks/itss.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
#include <soc/espi.h>
#include <soc/iomap.h>
#include <soc/irq.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/soc_chip.h>
/*
* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
* certain memory range as reserved range for BIOS usage.
* For this SOC, the range will be from 0FC800000h till FE7FFFFFh"
*/
static const struct lpc_mmio_range icl_lpc_fixed_mmio_ranges[] = {
{ PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE },
{ 0, 0 }
};
const struct lpc_mmio_range *soc_get_fixed_mmio_ranges()
{
return icl_lpc_fixed_mmio_ranges;
}
void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec)
{
const config_t *config = config_of(dev);
gen_io_dec[0] = config->gen1_dec;
gen_io_dec[1] = config->gen2_dec;
gen_io_dec[2] = config->gen3_dec;
gen_io_dec[3] = config->gen4_dec;
}
void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec)
{
/* Mirror these same settings in DMI PCR */
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
}
uint8_t get_pch_series(void)
{
uint16_t lpc_did_hi_byte;
/*
* Fetch upper 8 bits on ESPI device ID to determine PCH type
* Adding 1 to the offset to fetch upper 8 bits
*/
lpc_did_hi_byte = pci_read_config8(PCH_DEV_ESPI, PCI_DEVICE_ID + 1);
if (lpc_did_hi_byte == 0x9D)
return PCH_LP;
else if (lpc_did_hi_byte == 0xA3)
return PCH_H;
else
return PCH_UNKNOWN_SERIES;
}
#if ENV_RAMSTAGE
static void soc_mirror_dmi_pcr_io_dec(void)
{
struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0);
uint32_t io_dec_arr[] = {
pci_read_config32(dev, ESPI_GEN1_DEC),
pci_read_config32(dev, ESPI_GEN2_DEC),
pci_read_config32(dev, ESPI_GEN3_DEC),
pci_read_config32(dev, ESPI_GEN4_DEC),
};
/* Mirror these same settings in DMI PCR */
soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]);
}
void lpc_soc_init(struct device *dev)
{
/* Legacy initialization */
isa_dma_init();
pch_misc_init();
/* Enable CLKRUN_EN for power gating ESPI */
lpc_enable_pci_clk_cntl();
/* Set ESPI Serial IRQ mode */
if (CONFIG(SERIRQ_CONTINUOUS_MODE))
lpc_set_serirq_mode(SERIRQ_CONTINUOUS);
else
lpc_set_serirq_mode(SERIRQ_QUIET);
/* Interrupt configuration */
pch_enable_ioapic();
pch_pirq_init();
setup_i8259();
i8259_configure_irq_trigger(9, 1);
soc_mirror_dmi_pcr_io_dec();
}
/* Fill up ESPI IO resource structure inside SoC directory */
void pch_lpc_soc_fill_io_resources(struct device *dev)
{
/*
* PMC pci device gets hidden from PCI bus due to Silicon
* policy hence bind ACPI BASE aka ABASE (offset 0x20) with
* ESPI IO resources to ensure that ABASE falls under PCI reserved
* IO memory range.
*
* Note: Don't add any more resource with same offset 0x20
* under this device space.
*/
pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4,
ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO |
IORESOURCE_ASSIGNED | IORESOURCE_FIXED);
}
#endif
|
