1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <device/device.h>
#include <delay.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <intelblocks/systemagent.h>
#include <soc/cpu.h>
#include <soc/iomap.h>
#include <soc/systemagent.h>
#include "chip.h"
/*
* SoC implementation
*
* Add all known fixed memory ranges for Host Controller/Memory
* controller.
*/
void soc_add_fixed_mmio_resources(struct device *dev, int *index)
{
static const struct sa_mmio_descriptor soc_fixed_resources[] = {
{ PCIEXBAR, CONFIG_MMCONF_BASE_ADDRESS, CONFIG_SA_PCIEX_LENGTH,
"PCIEXBAR" },
{ MCHBAR, MCH_BASE_ADDRESS, MCH_BASE_SIZE, "MCHBAR" },
{ DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" },
{ EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" },
{ REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" },
{ EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" },
/*
* PMC pci device gets hidden from PCI bus due to Silicon
* policy hence binding PMCBAR aka PWRMBASE (offset 0x10) with
* SA resources to ensure that PMCBAR falls under PCI reserved
* memory range.
*
* Note: Don't add any more resource with same offset 0x10
* under this device space.
*/
{ PCI_BASE_ADDRESS_0, PCH_PWRM_BASE_ADDRESS, PCH_PWRM_BASE_SIZE,
"PMCBAR" },
};
sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources,
ARRAY_SIZE(soc_fixed_resources));
/* Add Vt-d resources if VT-d is enabled. */
if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE))
return;
sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources,
ARRAY_SIZE(soc_vtd_resources));
}
/*
* SoC implementation
*
* Perform System Agent Initialization during Ramstage phase.
*/
void soc_systemagent_init(struct device *dev)
{
/* Enable Power Aware Interrupt Routing */
enable_power_aware_intr();
/* Enable BIOS Reset CPL */
enable_bios_reset_cpl();
/* Configure turbo power limits 1ms after reset complete bit */
mdelay(1);
set_power_limits(28);
}
|
