1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <arch/io.h>
#include <device/mmio.h>
#include <console/console.h>
#include <cpu/x86/smm.h>
#include <cpu/intel/smm_reloc.h>
#include <device/device.h>
#include <device/pci.h>
#include <soc/iomap.h>
#include <soc/pm.h>
#include <soc/smm.h>
/* Save settings which will be committed in SMI functions. */
static uint32_t smm_save_params[SMM_SAVE_PARAM_COUNT];
void smm_southcluster_save_param(int param, uint32_t data)
{
smm_save_params[param] = data;
}
void smm_southbridge_clear_state(void)
{
uint32_t smi_en;
/* Log events from chipset before clearing */
if (CONFIG(ELOG))
southcluster_log_state();
printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
printk(BIOS_SPEW, " pmbase = 0x%04x\n", get_pmbase());
smi_en = inl(get_pmbase() + SMI_EN);
if (smi_en & APMC_EN) {
printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
}
/* Dump and clear status registers */
clear_smi_status();
clear_pm1_status();
clear_tco_status();
clear_gpe_status();
clear_alt_status();
clear_pmc_status();
}
static void smm_southcluster_route_gpios(void)
{
void *gpio_rout = (void *)(PMC_BASE_ADDRESS + GPIO_ROUT);
const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
uint32_t alt_gpio_reg = 0;
uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE];
int i;
printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
/* Start the routing for the specific gpios. */
write32(gpio_rout, route_reg);
/* Enable SMIs for the gpios that are set to trigger the SMI. */
for (i = 0; i < 16; i++) {
if ((route_reg & ROUTE_MASK) == ROUTE_SMI)
alt_gpio_reg |= (1 << i);
route_reg >>= 2;
}
printk(BIOS_DEBUG, "ALT_GPIO_SMI = %08x\n", alt_gpio_reg);
outl(alt_gpio_reg, alt_gpio_smi);
}
void smm_southbridge_enable_smi(void)
{
uint16_t pm1_events = PWRBTN_EN | GBL_EN;
printk(BIOS_DEBUG, "Enabling SMIs.\n");
if (!smm_save_params[SMM_SAVE_PARAM_PCIE_WAKE_ENABLE])
pm1_events |= PCIEXPWAK_DIS;
enable_pm1(pm1_events);
disable_gpe(PME_B0_EN);
/* Set up the GPIO route. */
smm_southcluster_route_gpios();
/*
* Enable SMI generation:
* - on APMC writes (io 0xb2)
* - on writes to SLP_EN (sleep states)
* - on writes to GBL_RLS (bios commands)
* No SMIs:
* - on TCO events
* - on microcontroller writes (io 0x62/0x66)
*/
enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS);
}
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
{
/*
* Issue SMI to set the gnvs pointer in SMM.
* tcg and smi1 are unused.
*
* EAX = APM_CNT_GNVS_UPDATE
* EBX = gnvs pointer
* EDX = APM_CNT
*/
asm volatile (
"outb %%al, %%dx\n\t"
: /* ignore result */
: "a" (APM_CNT_GNVS_UPDATE),
"b" ((uint32_t)gnvs),
"d" (APM_CNT)
);
}
|
