1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
|
/*
* This file is part of the coreboot project.
*
* Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/acpi.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <stdint.h>
#include <reg_script.h>
#include <baytrail/iomap.h>
#include <baytrail/iosf.h>
#include <baytrail/pci_devs.h>
#include <baytrail/pmc.h>
#include <baytrail/ramstage.h>
#include <baytrail/xhci.h>
#include "chip.h"
struct reg_script usb3_phy_script[] = {
/* USB3PHYInit() */
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_CDN_PLL_CONTROL,
~0x00700000, 0x00500000),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_CDN_VCO_START_CAL_POINT,
~0x001f0000, 0x000A0000),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_CCDRLF,
~0x0000000f, 0x0000000b),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_PEAKING_AMP_CONFIG_DIAG,
~0x000000f0, 0x000000f0),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_OFFSET_COR_CONFIG_DIAG,
~0x000001c0, 0x00000000),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_VGA_GAIN_CONFIG_DIAG,
~0x00000070, 0x00000020),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_REE_DAC_CONTROL,
~0x00000002, 0x00000002),
REG_IOSF_RMW(IOSF_PORT_USHPHY, USHPHY_CDN_U1_POWER_STATE_DEF,
~0x00000000, 0x00040000),
REG_SCRIPT_END
};
const struct reg_script xhci_init_script[] = {
/* CommonXhciHcInit() */
/* BAR + 0x0c[31:16] = 0x0200 */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x000c, 0x0000ffff, 0x02000000),
/* BAR + 0x0c[7:0] = 0x0a */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x000c, 0xffffff00, 0x0000000a),
/* BAR + 0x8094[23,21,14]=111b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8094, 0x00a04000),
/* BAR + 0x8110[20,11,8,2]=1100b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8110, ~0x00000104, 0x00100800),
/* BAR + 0x8144[8,7,6]=111b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8144, 0x000001c0),
/* BAR + 0x8154[21,13,3]=010b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8154, ~0x00200008, 0x80002000),
/* BAR + 0x816c[19:0]=1110x100000000111100b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x816c, 0xfff08000, 0x000e0030),
/* BAR + 0x8188[26,24]=11b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8188, 0x05000000),
/* BAR + 0x8174=0x1000c0a*/
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8174, 0xfe000000, 0x01000c0a),
/* BAR + 0x854c[29]=0b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x854c, ~0x20000000, 0),
/* BAR + 0x8178[12:0]=0b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8178, ~0xffffe000, 0),
/* BAR + 0x8164[7:0]=0xff */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8164, 0x000000ff),
/* BAR + 0x0010[10,9,5]=110b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0010, ~0x00000020, 0x00000600),
/* BAR + 0x8058[20,16,8]=110b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8058, ~0x00000100, 0x00110000),
/* BAR + 0x8060[25]=1b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8060, 0x02000000),
/* BAR + 0x80f0[20]=0b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80f0, ~0x00100000, 0),
/* BAR + 0x8008[19]=1b (to enable LPM) */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8008, 0x00080000),
/* BAR + 0x80fc[25]=1b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x80fc, 0x02000000),
/* 0x40/0x44 are written as bytes to avoid touching bit31 */
/* D20:F0:40[21,20,18,10,9,8]=111001b (don't write byte3) */
REG_PCI_RMW8(0x41, ~0x06, 0x01),
/* Except [21,20,19,18]=0001b USB wake W/A is disable IIL1E */
REG_PCI_RMW8(0x42, 0x3c, 0x04),
/* D20:F0:44[19:14,10,9,7,3:0]=1 (don't write byte3) */
REG_PCI_RMW8(0x44, 0x00, 0x8f),
REG_PCI_RMW8(0x45, ~0xcf, 0xc6),
REG_PCI_RMW8(0x46, ~0x0f, 0x0f),
/* BAR + 0x8140 = 0xff00f03c */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8140, 0, 0xff00f03c),
REG_SCRIPT_END
};
const struct reg_script xhci_init_boot_script[] = {
/* Setup USB3 phy */
REG_SCRIPT_NEXT(usb3_phy_script),
/* Initialize host controller */
REG_SCRIPT_NEXT(xhci_init_script),
/* BAR + 0x80e0[16,9,6]=001b, toggle bit 24=1 */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x00010200, 0x01000040),
/* BAR + 0x80e0 toggle bit 24=0 */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x01000000, 0),
REG_SCRIPT_END
};
const struct reg_script xhci_init_resume_script[] = {
/* Setup USB3 phy */
REG_SCRIPT_NEXT(usb3_phy_script),
/* Initialize host controller */
REG_SCRIPT_NEXT(xhci_init_script),
/* BAR + 0x80e0[16,9,6]=001b, leave bit 24=0 to prevent HC reset */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x01010200, 0x00000040),
REG_SCRIPT_END
};
const struct reg_script xhci_clock_gating_script[] = {
/* ConfigureXhciClockGating() */
/* D20:F0:40[21:19,18,10:8]=000,1,001 (don't write byte 3) */
REG_PCI_RMW16(0x40, ~0x0600, 0x0100),
REG_PCI_RMW8(0x42, ~0x38, 0x04),
/* D20:F0:44[5:3]=001b */
REG_PCI_RMW16(0x44, ~0x0030, 0x0008),
/* D20:F0:A0[19:18]=01b */
REG_PCI_RMW32(0xa0, ~0x00080000, 0x00040000),
/* D20:F0:A4[15:0]=0x00 */
REG_PCI_WRITE16(0xa4, 0x0000),
/* D20:F0:B0[21:17,14:13]=0000000b */
REG_PCI_RMW32(0xb0, ~0x00376000, 0x00000000),
/* D20:F0:50[31:0]=0x0bce6e5f */
REG_PCI_WRITE32(0x50, 0x0bce6e5f),
REG_SCRIPT_END
};
/* Warm Reset a USB3 port */
static void xhci_reset_port_usb3(device_t dev, int port)
{
struct reg_script reset_port_usb3_script[] = {
/* Issue Warm Port Rest to the port */
REG_RES_OR32(PCI_BASE_ADDRESS_0, XHCI_USB3_PORTSC(port),
XHCI_USB3_PORTSC_WPR),
/* Wait up to 100ms for it to complete */
REG_RES_POLL32(PCI_BASE_ADDRESS_0, XHCI_USB3_PORTSC(port),
XHCI_USB3_PORTSC_WRC, XHCI_USB3_PORTSC_WRC,
XHCI_RESET_TIMEOUT),
/* Clear change status bits, do not set PED */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, XHCI_USB3_PORTSC(port),
~XHCI_USB3_PORTSC_PED, XHCI_USB3_PORTSC_CHST),
REG_SCRIPT_END
};
reg_script_run_on_dev(dev, reset_port_usb3_script);
}
/* Prepare ports to be routed to EHCI or XHCI */
static void xhci_route_all(device_t dev)
{
static const struct reg_script xhci_route_all_script[] = {
/* USB3 SuperSpeed Enable */
REG_PCI_WRITE32(XHCI_USB3PR, BYTM_USB3_PORT_MAP),
/* USB2 Port Route to XHCI */
REG_PCI_WRITE32(XHCI_USB2PR, BYTM_USB2_PORT_MAP),
REG_SCRIPT_END
};
u32 port_disabled;
int port;
printk(BIOS_INFO, "USB: Route ports to XHCI controller\n");
/* Route ports to XHCI controller */
reg_script_run_on_dev(dev, xhci_route_all_script);
if (acpi_slp_type == 3)
return;
/* Reset enabled USB3 ports */
port_disabled = pci_read_config32(dev, XHCI_USB3PDO);
for (port = 0; port < BYTM_USB3_PORT_COUNT; port++) {
if (port_disabled & (1 << port))
continue;
xhci_reset_port_usb3(dev, port);
}
}
static void xhci_init(device_t dev)
{
struct soc_intel_baytrail_config *config = dev->chip_info;
struct reg_script xhci_hc_init[] = {
/* Initialize clock gating */
REG_SCRIPT_NEXT(xhci_clock_gating_script),
/* Finalize XHCC1 and XHCC2 */
REG_PCI_RMW32(0x44, ~0x00000000, 0x83c00000),
REG_PCI_RMW32(0x40, ~0x00800000, 0x80000000),
/* Set USB2 Port Routing Mask */
REG_PCI_WRITE32(XHCI_USB2PRM, BYTM_USB2_PORT_MAP),
/* Set USB3 Port Routing Mask */
REG_PCI_WRITE32(XHCI_USB3PRM, BYTM_USB3_PORT_MAP),
/*
* Disable ports if requested
*/
/* Open per-port disable control override */
REG_IO_RMW16(ACPI_BASE_ADDRESS + UPRWC, ~0, UPRWC_WR_EN),
REG_PCI_WRITE32(XHCI_USB2PDO, config->usb2_port_disable_mask),
REG_PCI_WRITE32(XHCI_USB3PDO, config->usb3_port_disable_mask),
/* Close per-port disable control override */
REG_IO_RMW16(ACPI_BASE_ADDRESS + UPRWC, ~UPRWC_WR_EN, 0),
REG_SCRIPT_END
};
/* Initialize XHCI controller for boot or resume path */
if (acpi_slp_type == 3)
reg_script_run_on_dev(dev, xhci_init_resume_script);
else
reg_script_run_on_dev(dev, xhci_init_boot_script);
/* Finalize Initialization */
reg_script_run_on_dev(dev, xhci_hc_init);
/* Route all ports to XHCI if requested */
if (config->usb_route_to_xhci)
xhci_route_all(dev);
}
static struct device_operations xhci_device_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = xhci_init,
.ops_pci = &soc_pci_ops,
};
static const struct pci_driver baytrail_xhci __pci_driver = {
.ops = &xhci_device_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = XHCI_DEVID
};
|