blob: 256ed4f2fa116b60769367a6e4b296c767d2dddd (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* The devicetree parser expects chip.h to reside directly in the path
* specified by the devicetree. */
#ifndef _BAYTRAIL_CHIP_H_
#define _BAYTRAIL_CHIP_H_
#include <stdint.h>
struct soc_intel_baytrail_config {
uint8_t enable_xdp_tap;
uint8_t sata_port_map;
uint8_t sata_ahci;
uint8_t ide_legacy_combined;
uint8_t clkreq_enable;
/* VR low power settings -- enable PS2 mode for gfx and core */
int vnn_ps2_enable;
int vcc_ps2_enable;
/* Disable SLP_X stretching after SUS power well loss. */
int disable_slp_x_stretch_sus_fail;
/* USB Port Disable mask */
uint16_t usb2_port_disable_mask;
uint16_t usb3_port_disable_mask;
/* USB routing */
int usb_route_to_xhci;
/* USB PHY settings specific to the board */
uint32_t usb2_per_port_lane0;
uint32_t usb2_per_port_rcomp_hs_pullup0;
uint32_t usb2_per_port_lane1;
uint32_t usb2_per_port_rcomp_hs_pullup1;
uint32_t usb2_per_port_lane2;
uint32_t usb2_per_port_rcomp_hs_pullup2;
uint32_t usb2_per_port_lane3;
uint32_t usb2_per_port_rcomp_hs_pullup3;
/* LPE Audio Clock configuration. */
int lpe_codec_clk_freq; /* 19 or 25 are valid. */
int lpe_codec_clk_num; /* Platform clock pins. [0:5] are valid. */
/* Native SD Card controller - override controller capabilities. */
uint32_t sdcard_cap_low;
uint32_t sdcard_cap_high;
/* Enable devices in ACPI mode */
int lpss_acpi_mode;
int scc_acpi_mode;
int lpe_acpi_mode;
/* Allow PCIe devices to wake system from suspend. */
int pcie_wake_enable;
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
* 0x05 = Enabled, 4.5ms short pulse
* 0x06 = Enabled, 6ms short pulse
* 0x07 = Enabled, 100ms short pulse
*/
int gpu_pipea_hotplug;
int gpu_pipea_port_select; /* Port select: 1=DP_B 2=DP_C */
uint16_t gpu_pipea_power_on_delay;
uint16_t gpu_pipea_light_on_delay;
uint16_t gpu_pipea_power_off_delay;
uint16_t gpu_pipea_light_off_delay;
uint16_t gpu_pipea_power_cycle_delay;
uint32_t gpu_pipea_backlight_pwm;
int gpu_pipeb_hotplug;
int gpu_pipeb_port_select; /* Port select: 1=DP_B 2=DP_C */
uint16_t gpu_pipeb_power_on_delay;
uint16_t gpu_pipeb_light_on_delay;
uint16_t gpu_pipeb_power_off_delay;
uint16_t gpu_pipeb_light_off_delay;
uint16_t gpu_pipeb_power_cycle_delay;
uint32_t gpu_pipeb_backlight_pwm;
};
extern struct chip_operations soc_intel_baytrail_ops;
#endif /* _BAYTRAIL_CHIP_H_ */
|
