1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _BAYTRAIL_IOSF_H_
#define _BAYTRAIL_IOSF_H_
#include <stdint.h>
#include <baytrail/pci_devs.h>
/*
* The Bay Trail SoC has a message network called IOSF Sideband. The access
* routines are through 3 registers in PCI config space of 00:00.0:
* MCR - control register
* MDR - data register
* MCRX - control register extension
* The extension regist is only used for addresses that don't fit into the
* 8 bit register address.
*/
#ifndef PCI_DEV
#define PCI_DEV(SEGBUS, DEV, FN) ( \
(((SEGBUS) & 0xFFF) << 20) | \
(((DEV) & 0x1F) << 15) | \
(((FN) & 0x07) << 12))
#endif
#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC)
#define MCR_REG 0xd0
#define IOSF_OPCODE(x) ((x) << 24)
#define IOSF_PORT(x) ((0xff & (x)) << 16)
#define IOSF_REG(x) ((0xff & (x)) << 8)
#define IOSF_BYTE_EN_0 0x10
#define IOSF_BYTE_EN_1 0x20
#define IOSF_BYTE_EN_2 0x40
#define IOSF_BYTE_EN_3 0x80
#define IOSF_BYTE_EN \
(IOSF_BYTE_EN_0 | IOSF_BYTE_EN_1 | IOSF_BYTE_EN_2 | IOSF_BYTE_EN_3)
#define MDR_REG 0xd4
#define MCRX_REG 0xd8
uint32_t iosf_bunit_read(int reg);
void iosf_bunit_write(int reg, uint32_t val);
uint32_t iosf_dunit_read(int reg);
void iosf_dunit_write(int reg, uint32_t val);
/* Some registers are per channel while the gloals live in dunit 0 */
uint32_t iosf_dunit_ch0_read(int reg);
uint32_t iosf_dunit_ch1_read(int reg);
uint32_t iosf_punit_read(int reg);
void iosf_punit_write(int reg, uint32_t val);
/* IOSF ports. */
#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */
#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */
#define IOSF_PORT_DUNIT_CH0 0x07 /* DUNIT Channel 0 */
#define IOSF_PORT_CPU_BUS 0x02 /* CPU Bus Interface Controller */
#define IOSF_PORT_BUNIT 0x03 /* System Memroy Arbiter/Bunit */
#define IOSF_PORT_PMC 0x04 /* Power Management Controller */
#define IOSF_PORT_GFX 0x06 /* Graphics Adapter */
#define IOSF_PORT_DUNIT_CH1 0x07 /* DUNIT Channel 1 */
#define IOSF_PORT_SYSMEMIO 0x0c /* System Memory IO */
#define IOSF_PORT_USBPHY 0x43 /* USB PHY */
#define IOSF_PORT_SATAPHY 0xa3 /* SATA PHY */
#define IOSF_PORT_PCIEPHY 0xa3 /* PCIE PHY */
/* Read and write opcodes differ per port. */
#define IOSF_OP_READ_AUNIT 0x10
#define IOSF_OP_WRITE_AUNIT (IOSF_OP_READ_AUNIT | 1)
#define IOSF_OP_READ_SYSMEMC 0x10
#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1)
#define IOSF_OP_READ_CPU_BUS 0x10
#define IOSF_OP_WRITE_CPU_BUS (IOSF_OP_READ_CPU_BUS | 1)
#define IOSF_OP_READ_BUNIT 0x10
#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1)
#define IOSF_OP_READ_PMC 0x06
#define IOSF_OP_WRITE_PMC (IOSF_OP_READ_PMC | 1)
#define IOSF_OP_READ_GFX 0x00
#define IOSF_OP_WRITE_GFX (IOSF_OP_READ_GFX | 1)
#define IOSF_OP_READ_SYSMEMIO 0x06
#define IOSF_OP_WRITE_SYSMEMIO (IOSF_OP_READ_SYSMEMIO | 1)
#define IOSF_OP_READ_USBPHY 0x06
#define IOSF_OP_WRITE_USBPHY (IOSF_OP_READ_USBPHY | 1)
#define IOSF_OP_READ_SATAPHY 0x00
#define IOSF_OP_WRITE_SATAPHY (IOSF_OP_READ_SATAPHY | 1)
#define IOSF_OP_READ_PCIEPHY 0x00
#define IOSF_OP_WRITE_PCIEPHY (IOSF_OP_READ_PCIEPHY | 1)
/*
* BUNIT Registers.
*/
#define BNOCACHE 0x23
/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */
#define BUNIT_BMBOUND 0x25
/* BMBOUND_HI describes the available ram above 4GiB. It has a
* 256MiB granularity. Physical address bits 35:28 are compared with 31:24
* bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB
* granularity care needs to be taken with the e820 map to account for a hole
* in the ram. */
#define BUNIT_BMBOUND_HI 0x26
#define BUNIT_MMCONF_REG 0x27
/* The SMMRR registers define the SMM region in MiB granularity. */
#define BUNIT_SMRRL 0x2e
#define BUNIT_SMRRH 0x2f
# define BUNIT_SMRR_ENABLE (1 << 31)
/*
* DUNIT Registers.
*/
#define DRP 0x00
# define DRP_DIMM0_RANK0_EN (0x01 << 0)
# define DRP_DIMM0_RANK1_EN (0x01 << 1)
# define DRP_DIMM1_RANK0_EN (0x01 << 2)
# define DRP_DIMM1_RANK1_EN (0x01 << 3)
# define DRP_RANK_MASK (DRP_DIMM0_RANK0_EN | DRP_DIMM0_RANK1_EN | \
DRP_DIMM1_RANK0_EN | DRP_DIMM1_RANK1_EN)
#define DTR0 0x01
# define DTR0_SPEED_MASK 0x03
# define DTR0_SPEED_800 0x00
# define DTR0_SPEED_1066 0x01
# define DTR0_SPEED_1333 0x02
# define DTR0_SPEED_1600 0x03
/*
* PUNIT Registers
*/
#define SB_BIOS_CONFIG 0x06
# define SB_BIOS_CONFIG_ECC_EN (1 << 31)
# define SB_BIOS_CONFIG_DUAL_CH_DIS (1 << 30)
# define SB_BIOS_CONFIG_EFF_ECC (1 << 29)
# define SB_BIOS_CONFIG_EFF_DUAL_CH_DIS (1 << 28)
# define SB_BIOS_CONFIG_PERF_MODE (1 << 17)
# define SB_BIOS_CONFIG_PDM_MODE (1 << 16)
# define SB_BIOS_CONFIG_DDRIO_PWRGATE (1 << 8)
# define SB_BIOS_CONFIG_GFX_TURBO_DIS (1 << 7)
# define SB_BIOS_CONFIG_PCIE_PLLOFFOK (1 << 1)
# define SB_BIOS_CONFIG_USB_CACHING_EN (1 << 0)
#define BIOS_RESET_CPL 0x05
# define BIOS_RESET_CPL_ALL_DONE (1 << 1)
# define BIOS_RESET_CPL_RESET_DONE (1 << 0)
#endif /* _BAYTRAIL_IOSF_H_ */
|
