1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _BAYTRAIL_GPIO_H_
#define _BAYTRAIL_GPIO_H_
#include <stdint.h>
#include <arch/io.h>
#include <baytrail/iomap.h>
/* #define GPIO_DEBUG */
/* Pad base, ex. PAD_CONF0[n]= PAD_BASE+16*n */
#define GPSCORE_PAD_BASE (IO_BASE_ADDRESS + 0x0000)
#define GPNCORE_PAD_BASE (IO_BASE_ADDRESS + 0x1000)
#define GPSSUS_PAD_BASE (IO_BASE_ADDRESS + 0x2000)
/* Pad register offset */
#define PAD_CONF0_REG 0x0
#define PAD_CONF1_REG 0x4
#define PAD_VAL_REG 0x8
/* Legacy IO register base */
#define GPSCORE_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x00)
#define GPSSUS_LEGACY_BASE (GPIO_BASE_ADDRESS + 0x80)
/* Some banks have no legacy GPIO interface */
#define GP_LEGACY_BASE_NONE 0xFFFF
#define LEGACY_USE_SEL_REG 0x00
#define LEGACY_IO_SEL_REG 0x04
#define LEGACY_GP_LVL_REG 0x08
#define LEGACY_TPE_REG 0x0C
#define LEGACY_TNE_REG 0x10
#define LEGACY_TS_REG 0x14
#define LEGACY_WAKE_EN_REG 0x18
/* Number of GPIOs in each bank */
#define GPNCORE_COUNT 27
#define GPSCORE_COUNT 102
#define GPSSUS_COUNT 44
/* GPIO legacy IO register settings */
#define GPIO_USE_PAD 0
#define GPIO_USE_LEGACY 1
#define GPIO_DIR_OUTPUT 0
#define GPIO_DIR_INPUT 1
#define GPIO_LEVEL_LOW 0
#define GPIO_LEVEL_HIGH 1
#define GPIO_PEDGE_DISABLE 0
#define GPIO_PEDGE_ENABLE 1
#define GPIO_NEDGE_DISABLE 0
#define GPIO_NEDGE_ENABLE 1
/* config0[29] - Disable second mask */
#define PAD_MASK2_DISABLE (1 << 29)
/* config0[27] - Direct Irq En */
#define PAD_IRQ_EN (1 << 27)
/* config0[24] - Gd Level */
#define PAD_LEVEL_IRQ (1 << 24)
#define PAD_EDGE_IRQ (0 << 24)
/* config0[17] - Slow clkgate / glitch filter */
#define PAD_SLOWGF_ENABLE (1 << 17)
/* config0[16] - Fast clkgate / glitch filter */
#define PAD_FASTGF_ENABLE (1 << 16)
/* config0[15] - Hysteresis enable (inverted) */
#define PAD_HYST_DISABLE (1 << 15)
#define PAD_HYST_ENABLE (0 << 15)
/* config0[14:13] - Hysteresis control */
#define PAD_HYST_CTRL_DEFAULT (2 << 13)
/* config0[11] - Bypass Flop */
#define PAD_FLOP_BYPASS (1 << 11)
#define PAD_FLOP_ENABLE (0 << 11)
/* config0[10:9] - Pull str */
#define PAD_PU_2K (0 << 9)
#define PAD_PU_10K (1 << 9)
#define PAD_PU_20K (2 << 9)
#define PAD_PU_40K (3 << 9)
/* config0[8:7] - Pull assign */
#define PAD_PULL_DISABLE (0 << 7)
#define PAD_PULL_UP (1 << 7)
#define PAD_PULL_DOWN (2 << 7)
/* config0[2:0] - Func. pin mux */
#define PAD_FUNC0 0x0
#define PAD_FUNC1 0x1
#define PAD_FUNC2 0x2
#define PAD_FUNC3 0x3
#define PAD_FUNC4 0x4
#define PAD_FUNC5 0x5
#define PAD_FUNC6 0x6
/* pad config0 power-on values - We will not often want to change these */
#define PAD_CONFIG0_DEFAULT (PAD_MASK2_DISABLE | PAD_SLOWGF_ENABLE | \
PAD_FASTGF_ENABLE | PAD_HYST_DISABLE | \
PAD_HYST_CTRL_DEFAULT | PAD_FLOP_BYPASS)
/* pad config1 reg power-on values - Shouldn't need to change this */
#define PAD_CONFIG1_DEFAULT 0x8000
/* pad_val[2] - Iinenb - active low */
#define PAD_VAL_INPUT_DISABLE (1 << 2)
#define PAD_VAL_INPUT_ENABLE (0 << 2)
/* pad_val[1] - Ioutenb - active low */
#define PAD_VAL_OUTPUT_DISABLE (1 << 1)
#define PAD_VAL_OUTPUT_ENABLE (0 << 1)
/* pad_val[0] - Value */
#define PAD_VAL_HIGH (1 << 0)
#define PAD_VAL_LOW (0 << 0)
/* pad_val reg power-on default varies by pad, and apparently can cause issues
* if not set correctly, even if the pin isn't configured as GPIO. */
#define PAD_VAL_DEFAULT (PAD_VAL_INPUT_ENABLE | PAD_VAL_OUTPUT_DISABLE)
/* Configure GPIOs as legacy by default. GPNCORE doesn't support
* legacy config -- so also configure the pad regs as GPIO. We rely upon
* the fact that all GPNCORE pads are function 0 GPIO. */
#define GPIO_INPUT_PU_10K \
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT }
#define GPIO_INPUT_PD_10K \
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT }
#define GPIO_INPUT_NOPU \
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT }
#define GPIO_OUT_LOW \
{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_OUTPUT_ENABLE | PAD_VAL_LOW, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_OUTPUT, \
.gp_lvl = GPIO_LEVEL_LOW }
#define GPIO_OUT_HIGH \
{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_OUTPUT_ENABLE | PAD_VAL_HIGH, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_OUTPUT, \
.gp_lvl = GPIO_LEVEL_HIGH }
/* Define no-pull / PU / PD configs for each functional config option */
#define GPIO_FUNC(_func, _pudir, _str) \
{ .use_sel = GPIO_USE_PAD, \
.pad_conf0 = PAD_FUNC##_func | PAD_##_pudir | PAD_PU_##_str | \
PAD_CONFIG0_DEFAULT, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_DEFAULT }
/* Default functional configs -- no PU */
#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K)
#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K)
#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K)
#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K)
#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K)
#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K)
#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K)
/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
* triggered. */
#define GPIO_ACPI_SCI \
{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT, \
.tne = 1, \
.wake_en = 1, }
#define GPIO_ACPI_SMI \
{ .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT | PAD_FUNC0, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT_ENABLE, \
.use_sel = GPIO_USE_LEGACY, \
.io_sel = GPIO_DIR_INPUT, \
.tne = 1, \
.smi = 1}
/* End marker */
#define GPIO_LIST_END 0xffffffff
#define GPIO_END \
{ .pad_conf0 = GPIO_LIST_END }
/* Common default GPIO settings */
#define GPIO_INPUT GPIO_INPUT_NOPU
#define GPIO_INPUT_PU GPIO_INPUT_PU_10K
#define GPIO_INPUT_PD GPIO_INPUT_PD_10K
#define GPIO_NC GPIO_INPUT_PU_10K
#define GPIO_DEFAULT GPIO_FUNC0
struct soc_gpio_map {
u32 pad_conf0;
u32 pad_conf1;
u32 pad_val;
u8 use_sel : 1;
u8 io_sel : 1;
u8 gp_lvl : 1;
u8 tpe : 1;
u8 tne : 1;
u8 wake_en : 1;
u8 smi : 1;
} __attribute__ ((packed));
struct soc_gpio_config {
const struct soc_gpio_map *ncore;
const struct soc_gpio_map *score;
const struct soc_gpio_map *ssus;
};
/* Description of GPIO 'bank' ex. {ncore, score. ssus} */
struct gpio_bank {
const int gpio_count;
const u8* gpio_to_pad;
const int legacy_base;
const unsigned long pad_base;
const u8 has_wake_en :1;
};
void setup_soc_gpios(struct soc_gpio_config *config);
/* This function is weak and can be overridden by a mainboard function. */
struct soc_gpio_config* mainboard_get_gpios(void);
/* Functions / defines for changing GPIOs in romstage */
/* SCORE Pad definitions. */
#define UART_RXD_PAD 82
#define UART_TXD_PAD 83
#define PCU_SMB_CLK_PAD 88
#define PCU_SMB_DATA_PAD 90
static inline unsigned int score_pconf0(int pad_num)
{
return GPSCORE_PAD_BASE + pad_num * 16;
}
static inline unsigned int ssus_pconf0(int pad_num)
{
return GPSSUS_PAD_BASE + pad_num * 16;
}
static inline void score_select_func(int pad, int func)
{
uint32_t reg;
uint32_t pconf0_addr = score_pconf0(pad);
reg = read32(pconf0_addr);
reg &= ~0x7;
reg |= func & 0x7;
write32(pconf0_addr, reg);
}
static inline void ssus_select_func(int pad, int func)
{
uint32_t reg;
uint32_t pconf0_addr = ssus_pconf0(pad);
reg = read32(pconf0_addr);
reg &= ~0x7;
reg |= func & 0x7;
write32(pconf0_addr, reg);
}
/* These functions require that the input pad be configured as an input GPIO */
static inline int score_get_gpio(int pad)
{
uint32_t val_addr = score_pconf0(pad) + PAD_VAL_REG;
return read32(val_addr) & PAD_VAL_HIGH;
}
static inline int ssus_get_gpio(int pad)
{
uint32_t val_addr = ssus_pconf0(pad) + PAD_VAL_REG;
return read32(val_addr) & PAD_VAL_HIGH;
}
#endif /* _BAYTRAIL_GPIO_H_ */
|