1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _SOC_APOLLOLAKE_CHIP_H_
#define _SOC_APOLLOLAKE_CHIP_H_
#include <commonlib/helpers.h>
#include <intelblocks/cfg.h>
#include <intelblocks/gspi.h>
#include <soc/gpe.h>
#include <soc/gpio.h>
#include <intelblocks/lpc_lib.h>
#include <device/i2c_simple.h>
#include <drivers/i2c/designware/dw_i2c.h>
#include <soc/pm.h>
#include <soc/usb.h>
#define MAX_PCIE_PORTS 6
#define CLKREQ_DISABLED 0xf
enum pnp_settings {
PNP_PERF,
PNP_POWER,
PNP_PERF_POWER,
};
struct soc_intel_apollolake_config {
/* Common structure containing soc config data required by common code*/
struct soc_intel_common_config common_soc_config;
/*
* Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has
* four CLKREQ inputs, but six root ports. Root ports without an
* associated CLKREQ signal must be marked with "CLKREQ_DISABLED"
*/
uint8_t pcie_rp_clkreq_pin[MAX_PCIE_PORTS];
/* Enable/disable hot-plug for root ports (0 = disable, 1 = enable). */
uint8_t pcie_rp_hotplug_enable[MAX_PCIE_PORTS];
/* De-emphasis enable configuration for each PCIe root port */
uint8_t pcie_rp_deemphasis_enable[MAX_PCIE_PORTS];
/* [14:8] DDR mode Number of dealy elements.Each = 125pSec.
* [6:0] SDR mode Number of dealy elements.Each = 125pSec.
*/
uint32_t emmc_tx_cmd_cntl;
/* [14:8] HS400 mode Number of dealy elements.Each = 125pSec.
* [6:0] SDR104/HS200 mode Number of dealy elements.Each = 125pSec.
*/
uint32_t emmc_tx_data_cntl1;
/* [30:24] SDR50 mode Number of dealy elements.Each = 125pSec.
* [22:16] DDR50 mode Number of dealy elements.Each = 125pSec.
* [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec.
* [6:0] SDR12/Compatibility mode Number of dealy elements.
* Each = 125pSec.
*/
uint32_t emmc_tx_data_cntl2;
/* [30:24] SDR50 mode Number of dealy elements.Each = 125pSec.
* [22:16] DDR50 mode Number of dealy elements.Each = 125pSec.
* [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec.
* [6:0] SDR12/Compatibility mode Number of dealy elements.
* Each = 125pSec.
*/
uint32_t emmc_rx_cmd_data_cntl1;
/* [14:8] HS400 mode 1 Number of dealy elements.Each = 125pSec.
* [6:0] HS400 mode 2 Number of dealy elements.Each = 125pSec.
*/
uint32_t emmc_rx_strobe_cntl;
/* [13:8] Auto Tuning mode Number of dealy elements.Each = 125pSec.
* [6:0] SDR104/HS200 Number of dealy elements.Each = 125pSec.
*/
uint32_t emmc_rx_cmd_data_cntl2;
/* Select the eMMC max speed allowed. */
uint8_t emmc_host_max_speed;
/* Specifies on which IRQ the SCI will internally appear. */
uint8_t sci_irq;
/* Configure serial IRQ (SERIRQ) line. */
enum serirq_mode serirq_mode;
uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */
uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */
uint8_t gpe0_dw3; /* GPE0_127_96 STS/EN */
/* Configure LPSS S0ix Enable */
uint8_t lpss_s0ix_enable;
/* Enable DPTF support */
int dptf_enable;
/* TCC activation offset value in degrees Celsius */
int tcc_offset;
/* PL1 override value in mW for APL */
uint16_t tdp_pl1_override_mw;
/* PL2 override value in mW for APL */
uint16_t tdp_pl2_override_mw;
/* Configure Audio clk gate and power gate
* IOSF-SB port ID 92 offset 0x530 [5] and [3]
*/
uint8_t hdaudio_clk_gate_enable;
uint8_t hdaudio_pwr_gate_enable;
uint8_t hdaudio_bios_config_lockdown;
/* SLP S3 minimum assertion width. */
int slp_s3_assertion_width_usecs;
/* GPIO pin for PERST_0 */
uint16_t prt0_gpio;
/* USB2 eye diagram settings per port */
struct usb2_eye_per_port usb2eye[APOLLOLAKE_USB2_PORT_MAX];
/* Override USB port configuration */
uint8_t usb_config_override;
struct usb_port_config usb2_port[APOLLOLAKE_USB2_PORT_MAX];
struct usb_port_config usb3_port[APOLLOLAKE_USB3_PORT_MAX];
/* GPIO SD card detect pin */
unsigned int sdcard_cd_gpio;
/* Select PNP Settings.
* (0) Performance,
* (1) Power
* (2) Power & Performance */
enum pnp_settings pnp_settings;
/* PMIC PCH_PWROK delay configuration - IPC Configuration
* Upd for changing PCH_PWROK delay configuration : I2C_Slave_Address
* (31:24) + Register_Offset (23:16) + OR Value (15:8) + AND Value (7:0)
*/
uint32_t PmicPmcIpcCtrl;
/* Options to disable XHCI Link Compliance Mode. Default is FALSE to not
* disable Compliance Mode. Set TRUE to disable Compliance Mode.
* 0:FALSE(Default), 1:True.
*/
uint8_t DisableComplianceMode;
/* Options to change USB3 ModPhy setting for the Integrated Filter (IF)
* value. Default is 0 to not changing default IF value (0x12). Set
* value with the range from 0x01 to 0xff to change IF value.
*/
uint8_t ModPhyIfValue;
/* Options to bump USB3 LDO voltage. Default is FALSE to not increasing
* LDO voltage. Set TRUE to increase LDO voltage with 40mV.
* 0:FALSE (default), 1:True.
*/
uint8_t ModPhyVoltageBump;
/* Options to adjust PMIC Vdd2 voltage. Default is 0 to not adjusting
* the PMIC Vdd2 default voltage 1.20v. Upd for changing Vdd2 Voltage
* configuration: I2C_Slave_Address (31:23) + Register_Offset (23:16)
* + OR Value (15:8) + AND Value (7:0) through BUCK5_VID[3:2]:
* 00=1.10v, 01=1.15v, 10=1.24v, 11=1.20v (default).
*/
uint32_t PmicVdd2Voltage;
/* Option to enable VTD feature. Default is 0 which disables VTD
* capability in FSP. Setting this option to 1 in devicetree will enable
* the Upd parameter VtdEnable.
*/
uint8_t enable_vtd;
/* Options to disable the LFPS periodic sampling for USB3 Ports.
* Default value of PMCTRL_REG bits[7:4] is 9 which means periodic sampling
* interval is 9ms.
* Set 1 to update XHCI host MMIO BAR + PMCTRL_REG (0x80A4 bits[7:4]) to 0
* 0:Enable (default), 1:Disable.
*/
uint8_t disable_xhci_lfps_pm;
};
typedef struct soc_intel_apollolake_config config_t;
#endif /* _SOC_APOLLOLAKE_CHIP_H_ */
|
