1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* This file is created based on Intel Alder Lake Processor CPU Datasheet
* Document number: 619501
* Chapter number: 14
*/
#include <arch/cpu.h>
#include <console/console.h>
#include <device/pci.h>
#include <cpu/x86/lapic.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/smm_reloc.h>
#include <cpu/intel/turbo.h>
#include <cpu/intel/common/common.h>
#include <fsp/api.h>
#include <intelblocks/cpulib.h>
#include <intelblocks/mp_init.h>
#include <intelblocks/msr.h>
#include <romstage_handoff.h>
#include <soc/cpu.h>
#include <soc/msr.h>
#include <soc/pci_devs.h>
#include <soc/pm.h>
#include <soc/soc_chip.h>
static void soc_fsp_load(void)
{
fsps_load(romstage_handoff_is_resume());
}
static void configure_isst(void)
{
config_t *conf = config_of_soc();
msr_t msr;
if (conf->speed_shift_enable) {
/*
* Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
* is supported or not. coreboot needs to configure MSR 0x1AA
* which is then reflected in the CPUID register.
*/
msr = rdmsr(MSR_MISC_PWR_MGMT);
msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
wrmsr(MSR_MISC_PWR_MGMT, msr);
} else {
msr = rdmsr(MSR_MISC_PWR_MGMT);
msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
wrmsr(MSR_MISC_PWR_MGMT, msr);
}
}
static void configure_misc(void)
{
msr_t msr;
config_t *conf = config_of_soc();
msr = rdmsr(IA32_MISC_ENABLE);
msr.lo |= (1 << 0); /* Fast String enable */
msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
wrmsr(IA32_MISC_ENABLE, msr);
/* Set EIST status */
cpu_set_eist(conf->eist_enable);
/* Disable Thermal interrupts */
msr.lo = 0;
msr.hi = 0;
wrmsr(IA32_THERM_INTERRUPT, msr);
/* Enable package critical interrupt only */
msr.lo = 1 << 4;
msr.hi = 0;
wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
/* Enable PROCHOT */
msr = rdmsr(MSR_POWER_CTL);
msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
msr.lo |= (1 << 23); /* Lock it */
wrmsr(MSR_POWER_CTL, msr);
}
static void enable_pm_timer_emulation(void)
{
msr_t msr;
if (!CONFIG_CPU_XTAL_HZ)
return;
/*
* The derived frequency is calculated as follows:
* (clock * msr[63:32]) >> 32 = target frequency.
* Back solve the multiplier so the 3.579545MHz ACPI timer frequency is used.
*/
msr.hi = (3579545ULL << 32) / CONFIG_CPU_XTAL_HZ;
/* Set PM1 timer IO port and enable */
msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
wrmsr(MSR_EMULATE_PM_TIMER, msr);
}
/* All CPUs including BSP will run the following function. */
void soc_core_init(struct device *cpu)
{
/* Clear out pending MCEs */
/* TODO(adurbin): This should only be done on a cold boot. Also, some
* of these banks are core vs package scope. For now every CPU clears
* every bank. */
mca_configure();
/* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
/* Configure Intel Speed Shift */
configure_isst();
/* Enable PM timer emulation */
enable_pm_timer_emulation();
/* Enable Direct Cache Access */
configure_dca_cap();
/* Set energy policy */
set_energy_perf_bias(ENERGY_POLICY_NORMAL);
/* Enable Turbo */
enable_turbo();
}
static void per_cpu_smm_trigger(void)
{
/* Relocate the SMM handler. */
smm_relocate();
}
static void post_mp_init(void)
{
/* Set Max Ratio */
cpu_set_max_ratio();
/*
* Now that all APs have been relocated as well as the BSP let SMIs
* start flowing.
*/
global_smi_enable();
}
static const struct mp_ops mp_ops = {
/*
* Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
* that are set prior to ramstage.
* Real MTRRs programming are being done after resource allocation.
*/
.pre_mp_init = soc_fsp_load,
.get_cpu_count = get_cpu_count,
.get_smm_info = smm_info,
.get_microcode_info = get_microcode_info,
.pre_mp_smm_init = smm_initialize,
.per_cpu_smm_trigger = per_cpu_smm_trigger,
.relocation_handler = smm_relocation_handler,
.post_mp_init = post_mp_init,
};
void soc_init_cpus(struct bus *cpu_bus)
{
if (mp_init_with_smm(cpu_bus, &mp_ops))
printk(BIOS_ERR, "MP initialization failure.\n");
/* Thermal throttle activation offset */
configure_tcc_thermal_target();
}
|
