1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* This file is created based on Intel Alder Lake Processor CPU Datasheet
* Document number: 619501
* Chapter number: 14
*/
#include <arch/cpu.h>
#include <console/console.h>
#include <device/pci.h>
#include <cpu/x86/lapic.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/smm_reloc.h>
#include <cpu/intel/turbo.h>
#include <cpu/intel/common/common.h>
#include <fsp/api.h>
#include <intelblocks/cpulib.h>
#include <intelblocks/mp_init.h>
#include <intelblocks/msr.h>
#include <soc/cpu.h>
#include <soc/msr.h>
#include <soc/pci_devs.h>
#include <soc/soc_chip.h>
static void soc_fsp_load(void)
{
fsps_load();
}
static void configure_misc(void)
{
msr_t msr;
config_t *conf = config_of_soc();
msr = rdmsr(IA32_MISC_ENABLE);
msr.lo |= (1 << 0); /* Fast String enable */
msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
wrmsr(IA32_MISC_ENABLE, msr);
/* Set EIST status */
cpu_set_eist(conf->eist_enable);
/* Disable Thermal interrupts */
msr.lo = 0;
msr.hi = 0;
wrmsr(IA32_THERM_INTERRUPT, msr);
/* Enable package critical interrupt only */
msr.lo = 1 << 4;
msr.hi = 0;
wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
/* Enable PROCHOT */
msr = rdmsr(MSR_POWER_CTL);
msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
msr.lo |= (1 << 23); /* Lock it */
wrmsr(MSR_POWER_CTL, msr);
}
/* All CPUs including BSP will run the following function. */
void soc_core_init(struct device *cpu)
{
/* Clear out pending MCEs */
/* TODO(adurbin): This should only be done on a cold boot. Also, some
* of these banks are core vs package scope. For now every CPU clears
* every bank. */
mca_configure();
/* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
enable_pm_timer_emulation();
/* Enable Direct Cache Access */
configure_dca_cap();
/* Set energy policy */
set_energy_perf_bias(ENERGY_POLICY_NORMAL);
/* Enable Turbo */
enable_turbo();
}
static void per_cpu_smm_trigger(void)
{
/* Relocate the SMM handler. */
smm_relocate();
}
static void post_mp_init(void)
{
/* Set Max Ratio */
cpu_set_max_ratio();
/*
* Now that all APs have been relocated as well as the BSP let SMIs
* start flowing.
*/
global_smi_enable();
}
static const struct mp_ops mp_ops = {
/*
* Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
* that are set prior to ramstage.
* Real MTRRs programming are being done after resource allocation.
*/
.pre_mp_init = soc_fsp_load,
.get_cpu_count = get_cpu_count,
.get_smm_info = smm_info,
.get_microcode_info = get_microcode_info,
.pre_mp_smm_init = smm_initialize,
.per_cpu_smm_trigger = per_cpu_smm_trigger,
.relocation_handler = smm_relocation_handler,
.post_mp_init = post_mp_init,
};
void soc_init_cpus(struct bus *cpu_bus)
{
if (mp_init_with_smm(cpu_bus, &mp_ops))
printk(BIOS_ERR, "MP initialization failure.\n");
/* Thermal throttle activation offset */
configure_tcc_thermal_target();
}
|
