1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
* Copyright (C) 2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __STONEYRIDGE_H__
#define __STONEYRIDGE_H__
#include <arch/io.h>
#include <types.h>
#include <device/pci_ids.h>
#include <device/device.h>
#include <soc/iomap.h>
#include "chip.h"
/* Power management index/data registers */
#define BIOSRAM_INDEX 0xcd4
#define BIOSRAM_DATA 0xcd5
#define PM_INDEX 0xcd6
#define PM_DATA 0xcd7
#define PM2_INDEX 0xcd0
#define PM2_DATA 0xcd1
#define PM_PCI_CTRL 0x08
#define FORCE_SLPSTATE_RETRY BIT(25)
#define FORCE_STPCLK_RETRY BIT(24)
#define PM_ACPI_MMIO_EN 0x24
#define PM_SERIRQ_CONF 0x54
#define PM_SERIRQ_NUM_BITS_17 0x0000
#define PM_SERIRQ_NUM_BITS_18 0x0004
#define PM_SERIRQ_NUM_BITS_19 0x0008
#define PM_SERIRQ_NUM_BITS_20 0x000c
#define PM_SERIRQ_NUM_BITS_21 0x0010
#define PM_SERIRQ_NUM_BITS_22 0x0014
#define PM_SERIRQ_NUM_BITS_23 0x0018
#define PM_SERIRQ_NUM_BITS_24 0x001c
#define PM_SERIRQ_MODE BIT(6)
#define PM_SERIRQ_ENABLE BIT(7)
#define PM_EVT_BLK 0x60
#define PM1_CNT_BLK 0x62
#define PM_TMR_BLK 0x64
#define PM_CPU_CTRL 0x66
#define PM_GPE0_BLK 0x68
#define PM_ACPI_SMI_CMD 0x6a
#define PM_ACPI_CONF 0x74
#define PM_RST_CTRL1 0xbe
#define SLPTYPE_CONTROL_EN BIT(5)
#define PM_PMIO_DEBUG 0xd2
#define PM_MANUAL_RESET 0xd3
#define PM_HUD_SD_FLASH_CTRL 0xe7
#define PM_YANG_SD_FLASH_CTRL 0xe8
#define PM_PCIB_CFG 0xea
#define PM_LPC_GATING 0xec
#define PM_LPC_AB_NO_BYPASS_EN BIT(2)
#define PM_LPC_A20_EN BIT(1)
#define PM_LPC_ENABLE BIT(0)
#define ACPI_SMI_CMD_CST_CONTROL 0xde
#define ACPI_SMI_CMD_PST_CONTROL 0xad
#define ACPI_SMI_CMD_DISABLE 0xbe
#define ACPI_SMI_CMD_ENABLE 0xef
#define ACPI_SMI_CMD_S4_REQ 0xc0
#define REV_STONEYRIDGE_A11 0x11
#define REV_STONEYRIDGE_A12 0x12
#define SPIROM_BASE_ADDRESS_REGISTER 0xa0
#define ROUTE_TPM_2_SPI BIT(3)
#define SPI_ABORT_ENABLE BIT(2)
#define SPI_ROM_ENABLE BIT(1)
#define SPI_ROM_ALT_ENABLE BIT(0)
#define SPI_PRESERVE_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
#define LPC_PCI_CONTROL 0x40
#define LEGACY_DMA_EN BIT(2)
#define LPC_IO_PORT_DECODE_ENABLE 0x44
#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
#define DECODE_ENABLE_MSS_PORT0 BIT(22)
#define DECODE_ENABLE_MSS_PORT1 BIT(23)
#define DECODE_ENABLE_MSS_PORT2 BIT(24)
#define DECODE_ENABLE_MSS_PORT3 BIT(25)
#define DECODE_ENABLE_FDC_PORT0 BIT(26)
#define DECODE_ENABLE_FDC_PORT1 BIT(27)
#define DECODE_ENABLE_GAME_PORT BIT(28)
#define DECODE_ENABLE_KBC_PORT BIT(29)
#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
#define DECODE_ENABLE_ADLIB_PORT BIT(31)
#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
#define LPC_WIDEIO2_ENABLE BIT(25)
#define LPC_WIDEIO1_ENABLE BIT(24)
#define DECODE_IO_PORT_ENABLE6 BIT(23)
#define DECODE_IO_PORT_ENABLE5 BIT(22)
#define DECODE_IO_PORT_ENABLE4 BIT(21)
#define DECODE_IO_PORT_ENABLE3 BIT(19)
#define DECODE_IO_PORT_ENABLE2 BIT(18)
#define DECODE_IO_PORT_ENABLE1 BIT(17)
#define DECODE_IO_PORT_ENABLE0 BIT(16)
#define LPC_SYNC_TIMEOUT_COUNT_ENABLE BIT(7)
#define LPC_WIDEIO0_ENABLE BIT(2)
/* Assuming word access to higher word (register 0x4a) */
#define LPC_IO_OR_MEM_DEC_EN_HIGH 0x4a
#define LPC_WIDEIO2_ENABLE_H BIT(9)
#define LPC_WIDEIO1_ENABLE_H BIT(8)
#define DECODE_IO_PORT_ENABLE6_H BIT(7)
#define DECODE_IO_PORT_ENABLE5_H BIT(6)
#define DECODE_IO_PORT_ENABLE4_H BIT(5)
#define DECODE_IO_PORT_ENABLE3_H BIT(3)
#define DECODE_IO_PORT_ENABLE2_H BIT(2)
#define DECODE_IO_PORT_ENABLE1_H BIT(1)
#define DECODE_IO_PORT_ENABLE0_H BIT(0)
/*
* Register 0x64 is 32-bit, composed by two 16-bit sub-registers.
* For ease of access, each sub-register is declared separetely.
*/
#define LPC_WIDEIO_GENERIC_PORT 0x64
#define LPC_WIDEIO1_GENERIC_PORT 0x66
#define ROM_ADDRESS_RANGE1_START 0x68
#define ROM_ADDRESS_RANGE1_END 0x6a
#define ROM_ADDRESS_RANGE2_START 0x6c
#define ROM_ADDRESS_RANGE2_END 0x6e
#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
#define LPC_MISC_CONTROL_BITS 0x78
#define LPC_NOHOG BIT(0)
#define LPC_WIDEIO2_GENERIC_PORT 0x90
/*
* LPC register 0xb8 is DWORD, here there are definitions for byte
* access. For example, bits 31-24 are accessed through byte access
* at register 0xbb ().
*/
#define LPC_ROM_DMA_EC_HOST_CONTROL 0xb8
#define LPC_HOST_CONTROL 0xbb
#define SPI_FROM_HOST_PREFETCH_EN BIT(0)
#define SPI_CNTRL0 0x00
#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
/* Nominal is 16.7MHz on older devices, 33MHz on newer */
#define SPI_READ_MODE_NOM 0x00000000
#define SPI_READ_MODE_DUAL112 ( BIT(29) )
#define SPI_READ_MODE_QUAD114 ( BIT(29) | BIT(18))
#define SPI_READ_MODE_DUAL122 (BIT(30) )
#define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18))
#define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) )
#define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18))
#define SPI_ARB_ENABLE BIT(19)
#define SPI_CNTRL1 0x0c
/* Use SPI_SPEED_16M-SPI_SPEED_66M below for the southbridge */
#define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12))
#define SPI_NORM_SPEED_SH 12
#define SPI_FAST_SPEED_SH 8
#define SPI100_ENABLE 0x20
#define SPI_USE_SPI100 BIT(0)
#define SPI100_SPEED_CONFIG 0x22
#define SPI_SPEED_66M (0x0)
#define SPI_SPEED_33M ( BIT(0))
#define SPI_SPEED_22M ( BIT(1) )
#define SPI_SPEED_16M ( BIT(1) | BIT(0))
#define SPI_SPEED_100M (BIT(2) )
#define SPI_SPEED_800K (BIT(2) | BIT(0))
#define SPI_NORM_SPEED_NEW_SH 12
#define SPI_FAST_SPEED_NEW_SH 8
#define SPI_ALT_SPEED_NEW_SH 4
#define SPI_TPM_SPEED_NEW_SH 0
#define SPI100_HOST_PREF_CONFIG 0x2c
#define SPI_RD4DW_EN_HOST BIT(15)
#define FCH_MISC_REG40_OSCOUT1_EN BIT(2)
static inline int sb_sata_enable(void)
{
/* True if IDE or AHCI. */
return (CONFIG_STONEYRIDGE_SATA_MODE == 0) ||
(CONFIG_STONEYRIDGE_SATA_MODE == 2);
}
static inline int sb_ide_enable(void)
{
/* True if IDE or LEGACY IDE. */
return (CONFIG_STONEYRIDGE_SATA_MODE == 0) ||
(CONFIG_STONEYRIDGE_SATA_MODE == 3);
}
void sb_enable_rom(void);
void configure_stoneyridge_uart(void);
void sb_clk_output_48Mhz(void);
void sb_disable_4dw_burst(void);
void sb_enable(device_t dev);
void southbridge_final(void *chip_info);
void southbridge_init(void *chip_info);
void sb_lpc_port80(void);
void sb_lpc_decode(void);
void sb_pci_port80(void);
void sb_read_mode(u32 mode);
void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
void sb_set_readspeed(u16 norm, u16 fast);
void sb_tpm_decode_spi(void);
void lpc_wideio_512_window(uint16_t base);
void lpc_wideio_16_window(uint16_t base);
u8 pm_read8(u8 reg);
u16 pm_read16(u8 reg);
u32 pm_read32(u8 reg);
void pm_write8(u8 reg, u8 value);
void pm_write16(u8 reg, u16 value);
void pm_write32(u8 reg, u32 value);
u8 smi_read8(u8 reg);
u16 smi_read16(u8 reg);
u32 smi_read32(u8 reg);
void smi_write8(u8 reg, u8 value);
void smi_write16(u8 reg, u16 value);
void smi_write32(u8 reg, u32 value);
uint16_t pm_acpi_pm_cnt_blk(void);
int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
void s3_resume_init_data(void *FchParams);
int s3_save_nvram_early(u32 dword, int size, int nvram_pos);
void bootblock_fch_early_init(void);
#endif /* __STONEYRIDGE_H__ */
|
