1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpigen.h>
#include <console/console.h>
#include <commonlib/helpers.h>
#include <device/mmio.h>
#include <amdblocks/gpio_banks.h>
#include <amdblocks/acpimmio.h>
#include <soc/southbridge.h>
#include <soc/gpio.h>
#include <soc/uart.h>
static const struct _uart_info {
uintptr_t base;
struct soc_amd_gpio mux[2];
} uart_info[] = {
[0] = { APU_UART0_BASE, {
PAD_NF(GPIO_138, UART0_TXD, PULL_NONE),
PAD_NF(GPIO_136, UART0_RXD, PULL_NONE),
} },
[1] = { APU_UART1_BASE, {
PAD_NF(GPIO_143, UART1_TXD, PULL_NONE),
PAD_NF(GPIO_141, UART1_RXD, PULL_NONE),
} },
[2] = { APU_UART2_BASE, {
PAD_NF(GPIO_137, UART2_TXD, PULL_NONE),
PAD_NF(GPIO_135, UART2_RXD, PULL_NONE),
} },
[3] = { APU_UART3_BASE, {
PAD_NF(GPIO_140, UART3_TXD, PULL_NONE),
PAD_NF(GPIO_142, UART3_RXD, PULL_NONE),
} },
};
uintptr_t get_uart_base(unsigned int idx)
{
if (idx >= ARRAY_SIZE(uart_info))
return 0;
return uart_info[idx].base;
}
void clear_uart_legacy_config(void)
{
write16((void *)FCH_UART_LEGACY_DECODE, 0);
}
void set_uart_config(unsigned int idx)
{
uint32_t uart_ctrl;
uint16_t uart_leg;
if (idx >= ARRAY_SIZE(uart_info))
return;
program_gpios(uart_info[idx].mux, 2);
if (CONFIG(PICASSO_UART_1_8MZ)) {
uart_ctrl = sm_pci_read32(SMB_UART_CONFIG);
uart_ctrl |= 1 << (SMB_UART_1_8M_SHIFT + idx);
sm_pci_write32(SMB_UART_CONFIG, uart_ctrl);
}
if (CONFIG(PICASSO_UART_LEGACY) && idx != 3) {
/* Force 3F8 if idx=0, 2F8 if idx=1, 3E8 if idx=2 */
/* TODO: make clearer once PPR is updated */
uart_leg = (idx << 8) | (idx << 10) | (idx << 12) | (idx << 14);
if (idx == 0)
uart_leg |= 1 << FCH_LEGACY_3F8_SH;
else if (idx == 1)
uart_leg |= 1 << FCH_LEGACY_2F8_SH;
else if (idx == 2)
uart_leg |= 1 << FCH_LEGACY_3E8_SH;
write16((void *)FCH_UART_LEGACY_DECODE, uart_leg);
}
}
static const char *uart_acpi_name(const struct device *dev)
{
switch (dev->path.mmio.addr) {
case APU_UART0_BASE:
return "FUR0";
case APU_UART1_BASE:
return "FUR1";
case APU_UART2_BASE:
return "FUR2";
case APU_UART3_BASE:
return "FUR3";
default:
return NULL;
}
}
/* Even though this is called enable, it gets called for both enabled and disabled devices. */
static void uart_enable(struct device *dev)
{
int dev_id;
switch (dev->path.mmio.addr) {
case APU_UART0_BASE:
dev_id = FCH_AOAC_DEV_UART0;
break;
case APU_UART1_BASE:
dev_id = FCH_AOAC_DEV_UART1;
break;
case APU_UART2_BASE:
dev_id = FCH_AOAC_DEV_UART2;
break;
case APU_UART3_BASE:
dev_id = FCH_AOAC_DEV_UART3;
break;
default:
printk(BIOS_ERR, "%s: Unknown device: %s\n", __func__, dev_path(dev));
return;
}
if (dev->enabled) {
power_on_aoac_device(dev_id);
wait_for_aoac_enabled(dev_id);
} else {
power_off_aoac_device(dev_id);
}
}
/* This gets called for both enabled and disabled devices. */
static void uart_inject_ssdt(const struct device *dev)
{
acpigen_write_scope(acpi_device_path(dev));
acpigen_write_STA(acpi_device_status(dev));
acpigen_pop_len(); /* Scope */
}
struct device_operations picasso_uart_mmio_ops = {
.read_resources = noop_read_resources,
.set_resources = noop_set_resources,
.scan_bus = scan_static_bus,
.acpi_name = uart_acpi_name,
.enable = uart_enable,
.acpi_fill_ssdt = uart_inject_ssdt,
};
|
