1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/cpu.h>
#include <amdblocks/mca.h>
#include <amdblocks/reset.h>
#include <amdblocks/smm.h>
#include <assert.h>
#include <console/console.h>
#include <cpu/amd/microcode.h>
#include <cpu/cpu.h>
#include <cpu/x86/lapic.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/smm.h>
#include <device/device.h>
#include <soc/cpu.h>
#include <soc/iomap.h>
#include <types.h>
_Static_assert(CONFIG_MAX_CPUS == 16, "Do not override MAX_CPUS. To reduce the number of "
"available cores, use the downcore_mode and disable_smt devicetree settings instead.");
/* MP and SMM loading initialization */
/*
* Do essential initialization tasks before APs can be fired up -
*
* 1. Prevent race condition in MTRR solution. Enable MTRRs on the BSP. This
* creates the MTRR solution that the APs will use. Otherwise APs will try to
* apply the incomplete solution as the BSP is calculating it.
*/
static void pre_mp_init(void)
{
x86_setup_mtrrs_with_detect_no_above_4gb();
x86_mtrr_check();
}
static void post_mp_init(void)
{
global_smi_enable();
apm_control(APM_CNT_SMMINFO);
}
static const struct mp_ops mp_ops = {
.pre_mp_init = pre_mp_init,
.get_cpu_count = get_cpu_count,
.get_smm_info = get_smm_info,
.relocation_handler = smm_relocation_handler,
.post_mp_init = post_mp_init,
};
void mp_init_cpus(struct bus *cpu_bus)
{
/* Clear for take-off */
if (mp_init_with_smm(cpu_bus, &mp_ops) != CB_SUCCESS)
printk(BIOS_ERR, "MP initialization failure.\n");
/* pre_mp_init made the flash not cacheable. Reset to WP for performance. */
mtrr_use_temp_range(FLASH_BASE_ADDR, CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT);
}
static void zen_2_3_init(struct device *dev)
{
check_mca();
setup_lapic();
set_cstate_io_addr();
amd_update_microcode_from_cbfs();
}
static struct device_operations cpu_dev_ops = {
.init = zen_2_3_init,
};
static struct cpu_device_id cpu_table[] = {
{ X86_VENDOR_AMD, CEZANNE_A0_CPUID},
{ 0, 0 },
};
static const struct cpu_driver zen_2_3 __cpu_driver = {
.ops = &cpu_dev_ops,
.id_table = cpu_table,
};
|
