1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Note: Some of the VGA control registers are located on the memory controller.
Registers are set both in raminit.c and northbridge.c */
#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <stdlib.h>
#include <string.h>
#include <bitops.h>
#include <cpu/cpu.h>
#include "chip.h"
#include "northbridge.h"
#include "cn700.h"
void write_protect_vgabios(void)
{
//Don't bother for now
}
static void vga_init(device_t dev)
{
u8 reg8;
print_debug("Copying BOCHS Bios to 0xf000\n");
/* Copy the BOCHs BIOS from 0xFFFFFFFF - ROM_SIZE - BOCHs size (64k) to 0xf0000
This is for compatibility with the VGA ROM's BIOS callbacks */
memcpy(0xf0000, (0xFFFFFFFF - ROM_SIZE - 0x10000), 0x10000);
printk_debug("Initializing VGA\n");
pci_write_config8(dev, 0x3c, 0xb);
/* Set memory rate to 200MHz */
outb(0x3d, CRTM_INDEX);
reg8 = inb(CRTM_DATA);
reg8 &= 0x0f;
reg8 |= (0x1 << 4);
outb(0x3d, CRTM_INDEX);
outb(reg8, CRTM_DATA);
/* Set framebuffer size */
reg8 = (CONFIG_VIDEO_MB / 4);
outb(0x39, SR_INDEX);
outb(reg8, SR_DATA);
pci_write_config8(dev, 0x04, 0x07);
pci_write_config8(dev, 0x0d, 0x20);
pci_write_config32(dev,0x10, 0xf4000008);
pci_write_config32(dev,0x14, 0xfb000000);
pci_write_config8(dev, 0x3e, 0x02);
pci_write_config8(dev, 0x3c, 0x0a);
printk_debug("INSTALL REAL-MODE IDT\n");
setup_realmode_idt();
printk_debug("DO THE VGA BIOS\n");
do_vgabios();
/* VGA seems to work without this, but crash & burn with it */
//printk_debug("Enable VGA console\n");
//vga_enable_console();
/* It's not clear if these need to be programmed before or after
* the VGA bios runs. Try both, clean up later */
/* Set memory rate to 200MHz */
outb(0x3d, CRTM_INDEX);
reg8 = inb(CRTM_DATA);
reg8 &= 0x0f;
reg8 |= (0x1 << 4);
outb(0x3d, CRTM_INDEX);
outb(reg8, CRTM_DATA);
/* Set framebuffer size (again) */
reg8 = (CONFIG_VIDEO_MB / 4);
outb(0x39, SR_INDEX);
outb(reg8, SR_DATA);
/* Clear the BOCHs Bios out of memory, so it doesn't confuse linux */
memset(0xf0000, 0, 0x10000);
}
static void vga_read_resources(device_t dev)
{
dev->rom_address = 0xfff80000;
dev->on_mainboard=1;
pci_dev_read_resources(dev);
}
static const struct device_operations vga_operations = {
.read_resources = vga_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = vga_init,
.ops_pci = 0,
};
static const struct pci_driver vga_driver __pci_driver = {
.ops = &vga_operations,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_CN700_VGA,
};
|