1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
#include <console/console.h>
#include <arch/io.h>
#include <stdint.h>
#include <device/device.h>
#include <device/pci.h>
#include <stdlib.h>
#include <string.h>
#include <bitops.h>
#include <cpu/cpu.h>
#include "chip.h"
/*
* pci_domain_read_resources needs to create two resource regions,
* one for memory and one for I/O. These are required for the
* resource allocation code to function correctly. The regions should
* be large enough to hold all expected resources for all PCI
* devices.
*/
static void pci_domain_read_resources(device_t dev)
{
struct resource *resource;
/* Initialize the system wide io space constraints */
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
resource->base = 0;
resource->limit = 0xffffUL;
resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
/* Initialize the system wide memory resources constraints */
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
resource->base = 0x80000000ULL;
resource->limit = 0xfeffffffULL; /* We can put pci resources in the system controll area */
resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
}
/*
* pci_domain_set_resources creates memory resources describing the
* fixed memory on the system. This is not actually used anywhere
* except when the linuxbios table is generated.
*/
static void pci_domain_set_resources(device_t dev)
{
device_t mc_dev;
/* Get the memory controller device */
mc_dev = dev->link[0].children;
if (mc_dev) {
/* Figure out which areas occupied by ram. */
int i, idx;
uint32_t memstart1, memstart2, extmemstart1, extmemstart2;
uint32_t memend1, memend2, extmemend1, extmemend2;
uint8_t bank_enable;
unsigned long start, end, size;
/* Find the memory setup */
memstart1 = pci_read_config32(mc_dev, 0x80);
memstart2 = pci_read_config32(mc_dev, 0x84);
extmemstart1 = pci_read_config32(mc_dev, 0x88);
extmemstart2 = pci_read_config32(mc_dev, 0x8c);
memend1 = pci_read_config32(mc_dev, 0x90);
memend2 = pci_read_config32(mc_dev, 0x94);
extmemend1 = pci_read_config32(mc_dev, 0x98);
extmemend2 = pci_read_config32(mc_dev, 0x9c);
bank_enable = pci_read_config32(mc_dev, 0xa0);
/* Report the memory regions */
idx = 10; /* Why does idx start at 10? */
for(i = 0; i < 8; i++) {
struct resource *res;
/* Ignore banks that are not enabled */
if (!(bank_enable & (1 << i))) {
continue;
}
/* Find the start and end of each bank */
if (i < 4) {
int shift = (8*i);
start = ((memstart1 >> shift) & 0xff) << 20;
start |= ((extmemstart1 >> shift) & 0xff) << 28;
end = ((memend1 >> shift) & 0xff) << 20;
end |= ((extmemend1 >> shift) & 0xff) << 28;
} else {
int shift = (8*(i - 4));
start = ((memstart2 >> shift) & 0xff) << 20;
start |= ((extmemstart2 >> shift) & 0xff) << 28;
end = ((memend2 >> shift) & 0xff) << 20;
end |= ((extmemend2 >> shift) & 0xff) << 28;
}
/* Comput the size of the bank */
size = (end + (1 << 20)) - start;
/* And now report the memory region */
res = new_resource(dev, idx++);
res->base = start;
res->size = size;
res->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
}
}
/* And assign the resources */
assign_resources(&dev->link[0]);
}
static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
{
max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
return max;
}
static struct device_operations pci_domain_ops = {
.read_resources = pci_domain_read_resources,
.set_resources = pci_domain_set_resources,
.enable_resources = enable_childrens_resources,
.init = 0,
.scan_bus = pci_domain_scan_bus,
.ops_pci_bus = &pci_ppc_conf1,
};
static void cpu_bus_init(device_t dev)
{
initialize_cpus(&dev->link[0]);
}
static void cpu_bus_noop(device_t dev)
{
}
static struct device_operations cpu_bus_ops = {
.read_resources = cpu_bus_noop,
.set_resources = cpu_bus_noop,
.enable_resources = cpu_bus_noop,
.init = cpu_bus_init,
.scan_bus = 0,
};
static void enable_dev(struct device *dev)
{
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
dev->ops = &pci_domain_ops;
}
else if (dev->path.type == DEVICE_PATH_CPU_BUS) {
dev->ops = &cpu_bus_ops;
}
}
struct chip_operations northbridge_motorola_mpc107_ops = {
CHIP_NAME("MPC107")
.enable_dev = enable_dev,
};
|