1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include <stdlib.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/via/vt8601/raminit.h"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
/*
*/
void udelay(int usecs)
{
int i;
for (i = 0; i < usecs; i++)
outb(i&0xff, 0x80);
}
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "lib/debug.c"
#include "southbridge/via/vt8231/vt8231_early_smbus.c"
#include "southbridge/via/vt8231/vt8231_early_serial.c"
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/via/vt8601/raminit.c"
/*
#include "sdram/generic_sdram.c"
*/
static void enable_mainboard_devices(void)
{
device_t dev;
/* dev 0 for southbridge */
dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
if (dev == PCI_DEV_INVALID) {
die("Southbridge not found!!!\n");
}
pci_write_config8(dev, 0x50, 7);
pci_write_config8(dev, 0x51, 0xff);
#if 0
// This early setup switches IDE into compatibility mode before PCI gets
// // a chance to assign I/Os
// movl $CONFIG_ADDR(0, 0x89, 0x42), %eax
// // movb $0x09, %dl
// movb $0x00, %dl
// PCI_WRITE_CONFIG_BYTE
//
#endif
/* we do this here as in V2, we can not yet do raw operations
* to pci!
*/
/* changed this to work correctly on later revisions of LB.
* The original dev += 0x100; stopped working. It also appears
* that if this is not set here, but in ide_init() only, the IDE
* does not work at all. I assume it needs to be set before something else,
* possibly before enabling the IDE peripheral, or it is a timing issue.
* Ben Hewson 29 Apr 2007.
*/
dev = pci_locate_device(PCI_ID(0x1106,0x0571), 0);
pci_write_config8(dev, 0x42, 0);
}
static void enable_shadow_ram(void)
{
device_t dev = 0;
unsigned char shadowreg;
shadowreg = pci_read_config8(dev, 0x63);
/* 0xf0000-0xfffff */
shadowreg |= 0x30;
pci_write_config8(dev, 0x63, shadowreg);
}
static void main(unsigned long bist)
{
unsigned long x;
if (bist == 0) {
early_mtrr_init();
}
enable_vt8231_serial();
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
enable_mainboard_devices();
enable_smbus();
enable_shadow_ram();
/*
this is way more generic than we need.
sdram_initialize(ARRAY_SIZE(cpu), cpu);
*/
sdram_set_registers((const struct mem_controller *) 0);
sdram_set_spd_registers((const struct mem_controller *) 0);
sdram_enable(0, (const struct mem_controller *) 0);
/* Check all of memory */
#if 0
ram_check(0x00000000, msr.lo);
#endif
#if 0
static const struct {
unsigned long lo, hi;
} check_addrs[] = {
/* Check 16MB of memory @ 0*/
{ 0x00000000, 0x01000000 },
#if TOTAL_CPUS > 1
/* Check 16MB of memory @ 2GB */
{ 0x80000000, 0x81000000 },
#endif
};
int i;
for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
ram_check(check_addrs[i].lo, check_addrs[i].hi);
}
#endif
}
|
