1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
|
#define ASSEMBLY 1
#define __PRE_RAM__
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#if 0
#include <cpu/x86/lapic.h>
#endif
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include <stdlib.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "lib/ramtest.c"
#include "northbridge/via/vt8623/raminit.h"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "lib/debug.c"
#include "southbridge/via/vt8235/vt8235_early_smbus.c"
#include "southbridge/via/vt8235/vt8235_early_serial.c"
static void memreset_setup(void)
{
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/via/vt8623/raminit.c"
static void enable_mainboard_devices(void)
{
device_t dev;
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) {
die("Southbridge not found!!!\n");
}
pci_write_config8(dev, 0x50, 0x80);
pci_write_config8(dev, 0x51, 0x1f);
#if 0
// This early setup switches IDE into compatibility mode before PCI gets
// a chance to assign I/Os
// movl $CONFIG_ADDR(0, 0x89, 0x42), %eax
// // movb $0x09, %dl
// movb $0x00, %dl
// PCI_WRITE_CONFIG_BYTE
#endif
/* we do this here as in V2, we can not yet do raw operations
* to pci!
*/
dev += 0x100; /* ICKY */
pci_write_config8(dev, 0x04, 7);
pci_write_config8(dev, 0x40, 3);
pci_write_config8(dev, 0x42, 0);
pci_write_config8(dev, 0x3c, 0xe);
pci_write_config8(dev, 0x3d, 0);
}
static void enable_shadow_ram(void)
{
device_t dev = 0; /* no need to look up 0:0.0 */
unsigned char shadowreg;
/* dev 0 for southbridge */
shadowreg = pci_read_config8(dev, 0x63);
/* 0xf0000-0xfffff */
shadowreg |= 0x30;
pci_write_config8(dev, 0x63, shadowreg);
}
static void main(unsigned long bist)
{
unsigned long x;
device_t dev;
/*
* Enable VGA; 32MB buffer.
*/
pci_write_config8(0, 0xe1, 0xdd);
/*
* Disable the firewire stuff, which apparently steps on IO 0+ on
* reset. Doh!
*/
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_6305), 0);
if (dev != PCI_DEV_INVALID) {
pci_write_config8(dev, 0x15, 0x1c);
}
enable_vt8235_serial();
uart_init();
console_init();
enable_smbus();
print_spew("In auto.c:main()\r\n");
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
// init_timer();
outb(5, 0x80);
print_debug(" Enabling mainboard devices\r\n");
enable_mainboard_devices();
print_debug(" Enabling shadow ram\r\n");
enable_shadow_ram();
ddr_ram_setup((const struct mem_controller *)0);
/* Check all of memory */
#if 0
ram_check(0x00000000, msr.lo);
#endif
#if 0
static const struct {
unsigned long lo, hi;
} check_addrs[] = {
/* Check 16MB of memory @ 0*/
{ 0x00000000, 0x01000000 },
#if TOTAL_CPUS > 1
/* Check 16MB of memory @ 2GB */
{ 0x80000000, 0x81000000 },
#endif
};
int i;
for(i = 0; i < ARRAY_SIZE(check_addrs); i++) {
ram_check(check_addrs[i].lo, check_addrs[i].hi);
}
#endif
if (bist == 0) {
print_debug(" Doing MTRR init.\r\n");
early_mtrr_init();
}
//dump_pci_devices();
print_spew("Leaving auto.c:main()\r\n");
}
|
