1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 VIA Technologies, Inc.
* (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/via/cn700/raminit.h"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#include "pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
#include "southbridge/via/vt8235/vt8235_early_serial.c"
static void memreset_setup(void)
{
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/via/cn700/raminit.c"
static void enable_mainboard_devices(void)
{
device_t dev;
u8 reg;
/*
* If I enable SATA, FILO will not find the IDE disk, so I'll disable
* SATA here. To not conflict with PCI spec, I'll move IDE device
* from 00:0f.1 to 00:0f.0.
*/
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT6420_SATA), 0);
if (dev != PCI_DEV_INVALID) {
/* Enable PATA. */
reg = pci_read_config8(dev, 0xd1);
reg |= 0x08;
pci_write_config8(dev, 0xd1, reg);
reg = pci_read_config8(dev, 0x49);
reg |= 0x80;
pci_write_config8(dev, 0x49, reg);
} else {
print_debug("No SATA device\r\n");
}
/* Disable SATA, and PATA device will be 00:0f.0. */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Southbridge not found!!!\r\n");
reg = pci_read_config8(dev, 0x50);
reg |= 0x08;
pci_write_config8(dev, 0x50, reg);
}
static const struct mem_controller ctrl = {
.d0f0 = 0x0000,
.d0f2 = 0x2000,
.d0f3 = 0x3000,
.d0f4 = 0x4000,
.d0f7 = 0x7000,
.d1f0 = 0x8000,
.channel0 = { 0x50 },
};
static void main(unsigned long bist)
{
unsigned long x;
device_t dev;
/* Enable multifunction for northbridge. */
pci_write_config8(ctrl.d0f0, 0x4f, 0x01);
enable_vt8235_serial();
uart_init();
console_init();
print_spew("In auto.c:main()\r\n");
enable_smbus();
smbus_fixup(&ctrl);
if (bist == 0) {
print_debug("doing early_mtrr\r\n");
early_mtrr_init();
}
/* Halt if there was a built-in self test failure. */
report_bist_failure(bist);
print_debug("Enabling mainboard devices\r\n");
enable_mainboard_devices();
ddr_ram_setup(&ctrl);
/* ram_check(0, 640 * 1024); */
print_spew("Leaving auto.c:main()\r\n");
}
|
