1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
#include "AGESA.h"
#include "amdlib.h"
#include <northbridge/amd/agesa/agesawrapper.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include "Ids.h"
#include "OptionsIds.h"
#include "heapManager.h"
#include <arch/io.h>
#include <stdlib.h>
#ifdef __PRE_RAM__
/* These defines are used to select the appropriate socket for the SPD read
* because this is a multi-socket design.
*/
#define PCI_REG_GPIO_48_47_46_37_CNTRL (0xA6)
#define PCI_REG_GPIO_52_to_49_CNTRL (0x50)
#define GPIO_OUT_BIT_GPIO48 (BIT3)
#define GPIO_OUT_BIT_GPIO49 (BIT0)
#define GPIO_OUT_ENABLE_BIT_GPIO48 (BIT7)
#define GPIO_OUT_ENABLE_BIT_GPIO49 (BIT4)
static UINT8 select_socket(UINT8 socket_id)
{
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
UINT8 value = 0;
UINT8 gpio52_to_49 = 0;
/* Configure GPIO49,48 to select the desired socket
* GPIO49,48 control the IDTQS3253 S1,S0
* S1 S0 true table
* 0 0 channel 0
* 0 1 channel 1
* 1 0 channel 2 - Socket 0
* 1 1 channel 3 - Socket 1
* Note: Above is abstracted from Schematic. But actually it seems to be other way.
* 1 0 channel 2 - Socket 1
* 1 1 channel 3 - Socket 0
* Note: The DIMMs need to be plugged in from the farthest slot for each channel.
*/
gpio52_to_49 = pci_read_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL);
value = gpio52_to_49 | GPIO_OUT_BIT_GPIO49; // Output of GPIO49 is always forced to "1"
value &= ~(GPIO_OUT_ENABLE_BIT_GPIO49); // 0=Output Enabled, 1=Tristate
pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, value);
value = pci_read_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL);
value &= ~(GPIO_OUT_BIT_GPIO48);
value |= (~(socket_id & 1)) << 3; // Output of GPIO48 is inverse of SocketId
value &= ~(GPIO_OUT_ENABLE_BIT_GPIO48); // 0=Output Enabled, 1=Tristate
pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, value);
return gpio52_to_49;
}
static void restore_socket(UINT8 original_value)
{
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, original_value);
// TODO: Restore previous GPIO48 configurations?
//pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, gpio48_47_46_37_save);
}
#endif
static AGESA_STATUS board_ReadSpd (UINT32 Func,UINT32 Data, VOID *ConfigPtr);
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD, board_ReadSpd },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_DRAM_INIT, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
static AGESA_STATUS board_ReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
AGESA_STATUS Status;
#ifdef __PRE_RAM__
UINT8 original_value = 0;
if (ConfigPtr == NULL)
return AGESA_ERROR;
original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);
Status = agesa_ReadSpd (Func, Data, ConfigPtr);
restore_socket(original_value);
#else
Status = AGESA_UNSUPPORTED;
#endif
return Status;
}
const struct OEM_HOOK OemCustomize = {
};
|
