1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2010 Joseph Smith <joe@settoplinux.org>
* Copyright (C) 2010 Stefan Reinauer <stepan@openbios.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include <drivers/intel/gma/int15.h>
#include <arch/io.h>
#include <arch/interrupt.h>
// setting the bit disables the led.
#define PARPORT_GPIO_LED_GREEN (1 << 0)
#define PARPORT_GPIO_LED_ORANGE (1 << 1)
#define PARPORT_GPIO_LED_RED (1 << 2)
#define PARPORT_GPIO_IR_PORT (1 << 6)
static u8 get_parport_gpio(void)
{
return inb(0x378);
}
static void set_parport_gpio(u8 gpios)
{
outb(gpios, 0x378);
}
static void parport_gpios(void)
{
u8 pp_gpios = get_parport_gpio();
/* disable red led */
pp_gpios |= PARPORT_GPIO_LED_RED;
set_parport_gpio(pp_gpios);
pp_gpios = get_parport_gpio();
printk(BIOS_DEBUG, "IP1000 GPIOs:\n");
printk(BIOS_DEBUG, " GPIO mask: %02x\n", pp_gpios);
printk(BIOS_DEBUG, " green led: %s\n",
(pp_gpios & PARPORT_GPIO_LED_GREEN) ? "off" : "on");
printk(BIOS_DEBUG, " orange led: %s\n",
(pp_gpios & PARPORT_GPIO_LED_ORANGE) ? "off" : "on");
printk(BIOS_DEBUG, " red led: %s\n",
(pp_gpios & PARPORT_GPIO_LED_RED) ? "off" : "on");
printk(BIOS_DEBUG, " IR port: %s\n",
(pp_gpios & PARPORT_GPIO_IR_PORT) ? "off" : "on");
}
static void flash_gpios(void)
{
u8 manufacturer_id = read8((u8 *)0xffbc0000);
u8 device_id = read8((u8 *)0xffbc0001);
if ((manufacturer_id == 0x20) &&
((device_id == 0x2c) || (device_id == 0x2d))) {
printk(BIOS_DEBUG, "Detected ST M50FW0%c0 flash:\n",
(device_id == 0x2c)?'4':'8');
u8 fgpi = read8((u8 *)0xffbc0100);
printk(BIOS_DEBUG, " FGPI0 [%c] FGPI1 [%c] FGPI2 [%c] FGPI3 [%c] FGPI4 [%c]\n",
(fgpi & (1 << 0)) ? 'X' : ' ',
(fgpi & (1 << 1)) ? 'X' : ' ',
(fgpi & (1 << 2)) ? 'X' : ' ',
(fgpi & (1 << 3)) ? 'X' : ' ',
(fgpi & (1 << 4)) ? 'X' : ' ');
} else {
printk(BIOS_DEBUG, "No ST M50FW040/M50FW080 flash, don't read FGPI.\n");
}
}
static void mainboard_init(device_t dev)
{
parport_gpios();
flash_gpios();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = mainboard_init;
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
