1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Joseph Smith <joe@settoplinux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <delay.h>
#define PME_DEV PNP_DEV(0x2e, 0x0a)
#define PME_IO_BASE_ADDR 0x800 /* Runtime register base address */
#define ICH_IO_BASE_ADDR 0x00000500 /* GPIO base address register */
/* Early mainboard specific GPIO setup. */
static void mb_gpio_init(void)
{
device_t dev;
uint16_t port;
uint32_t set_gpio;
/* Southbridge GPIOs. */
/* Set the LPC device statically. */
dev = PCI_DEV(0x0, 0x1f, 0x0);
/* Set the value for GPIO base address register and enable GPIO. */
pci_write_config32(dev, GPIO_BASE, (ICH_IO_BASE_ADDR | 1));
pci_write_config8(dev, GPIO_CNTL, 0x10);
/* Set GPIO23 to high, this enables the LAN controller. */
udelay(10);
set_gpio = inl(ICH_IO_BASE_ADDR + 0x0c);
set_gpio |= 1 << 23;
outl(set_gpio, ICH_IO_BASE_ADDR + 0x0c);
/* Disable AC97 Modem */
pci_write_config8(dev, 0xf2, 0x40);
/* Super I/O GPIOs. */
dev = PME_DEV;
port = dev >> 8;
/* Enter the configuration state. */
outb(0x55, port);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, PME_IO_BASE_ADDR);
pnp_set_enable(dev, 1);
/* GP21 - LED_RED */
outl(0x01, PME_IO_BASE_ADDR + 0x2c);
/* GP30 - FAN2_TACH */
outl(0x05, PME_IO_BASE_ADDR + 0x33);
/* GP31 - FAN1_TACH */
outl(0x05, PME_IO_BASE_ADDR + 0x34);
/* GP32 - FAN2_CTRL */
outl(0x04, PME_IO_BASE_ADDR + 0x35);
/* GP33 - FAN1_CTRL */
outl(0x04, PME_IO_BASE_ADDR + 0x36);
/* GP34 - AUD_MUTE_OUT_R */
outl(0x00, PME_IO_BASE_ADDR + 0x37);
/* GP36 - KBRST */
outl(0x00, PME_IO_BASE_ADDR + 0x39);
/* GP37 - A20GATE */
outl(0x00, PME_IO_BASE_ADDR + 0x3a);
/* GP42 - GPIO_PME_OUT */
outl(0x00, PME_IO_BASE_ADDR + 0x3d);
/* GP50 - SER2_RI */
outl(0x05, PME_IO_BASE_ADDR + 0x3f);
/* GP51 - SER2_DCD */
outl(0x05, PME_IO_BASE_ADDR + 0x40);
/* GP52 - SER2_RX */
outl(0x05, PME_IO_BASE_ADDR + 0x41);
/* GP53 - SER2_TX */
outl(0x04, PME_IO_BASE_ADDR + 0x42);
/* GP55 - SER2_RTS */
outl(0x04, PME_IO_BASE_ADDR + 0x44);
/* GP56 - SER2_CTS */
outl(0x05, PME_IO_BASE_ADDR + 0x45);
/* GP57 - SER2_DTR */
outl(0x04, PME_IO_BASE_ADDR + 0x46);
/* GP60 - LED_GREEN */
outl(0x01, PME_IO_BASE_ADDR + 0x47);
/* GP61 - LED_YELLOW */
outl(0x01, PME_IO_BASE_ADDR + 0x48);
/* GP3 */
outl(0xc0, PME_IO_BASE_ADDR + 0x4d);
/* GP4 */
outl(0x04, PME_IO_BASE_ADDR + 0x4e);
/* FAN1 */
outl(0x01, PME_IO_BASE_ADDR + 0x56);
/* FAN2 */
outl(0x01, PME_IO_BASE_ADDR + 0x57);
/* Fan Control */
outl(0x50, PME_IO_BASE_ADDR + 0x58);
/* Fan1 Tachometer */
outl(0xff, PME_IO_BASE_ADDR + 0x59);
/* Fan2 Tachometer */
outl(0xff, PME_IO_BASE_ADDR + 0x5a);
/* LED1 */
outl(0x00, PME_IO_BASE_ADDR + 0x5d);
/* LED2 */
outl(0x00, PME_IO_BASE_ADDR + 0x5e);
/* Keyboard Scan Code */
outl(0x00, PME_IO_BASE_ADDR + 0x5f);
/* Exit the configuration state. */
outb(0xaa, port);
}
|
