1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "agesawrapper.h"
#include "amdlib.h"
#include "BiosCallOuts.h"
#include "Ids.h"
#include "OptionsIds.h"
#include "heapManager.h"
#include <northbridge/amd/agesa/family15/dimmSpd.h>
#include <arch/io.h>
#ifdef __PRE_RAM__
/* These defines are used to select the appropriate socket for the SPD read
* because this is a multi-socket design.
*/
#define PCI_REG_GPIO_56_to_53_CNTRL (0x52)
#define GPIO_OUT_BIT_GPIO53 (BIT0)
#define GPIO_OUT_BIT_GPIO54 (BIT1)
#define GPIO_OUT_ENABLE_BIT_GPIO53 (BIT4)
#define GPIO_OUT_ENABLE_BIT_GPIO54 (BIT5)
#define GPIO_OUT_BIT_GPIO54_to_53_MASK \
(GPIO_OUT_BIT_GPIO54 | GPIO_OUT_BIT_GPIO53)
#define GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK \
(GPIO_OUT_ENABLE_BIT_GPIO54 | GPIO_OUT_ENABLE_BIT_GPIO53)
static UINT8 select_socket(UINT8 socket_id)
{
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBus
UINT8 value = 0;
UINT8 gpio56_to_53 = 0;
/* Configure GPIO54,53 to select the desired socket
* GPIO54,53 control the HC4052 S1,S0
* S1 S0 true table
* 0 0 channel 1 (Socket1)
* 0 1 channel 2 (Socket2)
* 1 0 channel 3 (Socket3)
* 1 1 channel 4 (Socket4)
*/
gpio56_to_53 = pci_read_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL);
value = gpio56_to_53 & (~GPIO_OUT_BIT_GPIO54_to_53_MASK);
value |= socket_id;
value &= (~GPIO_OUT_ENABLE_BIT_GPIO54_to_53_MASK); // 0=Output Enabled, 1=Tristate
pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, value);
return gpio56_to_53;
}
static void restore_socket(UINT8 original_value)
{
device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBus
pci_write_config8(sm_dev, PCI_REG_GPIO_56_to_53_CNTRL, original_value);
}
#endif
static AGESA_STATUS board_ReadSpd (UINT32 Func,UINT32 Data,VOID *ConfigPtr);
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_ALLOCATE_BUFFER, BiosAllocateBuffer },
{AGESA_DEALLOCATE_BUFFER, BiosDeallocateBuffer },
{AGESA_LOCATE_BUFFER, BiosLocateBuffer },
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD, board_ReadSpd },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_DRAM_INIT, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
};
AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
UINTN i;
AGESA_STATUS CalloutStatus;
UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
for (i = 0; i < CallOutCount; i++) {
if (BiosCallouts[i].CalloutName == Func) {
break;
}
}
if(i >= CallOutCount) {
return AGESA_UNSUPPORTED;
}
CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
return CalloutStatus;
}
static AGESA_STATUS board_ReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
AGESA_STATUS Status;
#ifdef __PRE_RAM__
UINT8 original_value = 0;
if (ConfigPtr == NULL)
return AGESA_ERROR;
original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);
Status = agesa_ReadSPD (Func, Data, ConfigPtr);
restore_socket(original_value);
#else
Status = AGESA_UNSUPPORTED;
#endif
return Status;
}
|
