1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <bootstate.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <gpio.h>
#include <hwilib.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
#include <soc/pcr_ids.h>
#include <timer.h>
#include <timestamp.h>
#include <baseboard/variants.h>
#include <types.h>
#include <variant/ptn3460.h>
#define TX_DWORD3 0xa8c
void variant_mainboard_final(void)
{
int status;
struct device *dev = NULL;
uint16_t cmd;
/*
* Set up the DP2LVDS converter.
* ptn3460_init() may only be executed after i2c bus init.
*/
status = ptn3460_init("hwinfo.hex");
if (status)
printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
else
printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
/*
* PIR6 register mapping for PCIe root ports
* INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
*/
pcr_write16(PID_ITSS, 0x314c, 0x0321);
/* Enable CLKRUN_EN for power gating LPC */
lpc_enable_pci_clk_cntl();
/*
* Enable LPC PCE (Power Control Enable) by setting IOSF-SB port 0xD2
* offset 0x341D bit3 and bit0.
* Enable LPC CCE (Clock Control Enable) by setting IOSF-SB port 0xD2
* offset 0x341C bit [3:0].
*/
pcr_or32(PID_LPC, PCR_LPC_PRC, (PCR_LPC_CCE_EN | PCR_LPC_PCE_EN));
/*
* Correct the SATA transmit signal via the High Speed I/O Transmit
* Control Register 3.
* Bit [23:16] set the output voltage swing for TX line.
* The value 0x4a sets the swing level to 0.58 V.
*/
pcr_rmw32(PID_MODPHY, TX_DWORD3, (0x00 << 16), (0x4a << 16));
/* Set Master Enable for on-board PCI device. */
dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403e, 0);
if (dev) {
cmd = pci_read_config16(dev, PCI_COMMAND);
cmd |= PCI_COMMAND_MASTER;
pci_write_config16(dev, PCI_COMMAND, cmd);
/* Disable clock outputs 0-3 (CLKOUT) for upstream XIO2001 PCIe
* to PCI Bridge. */
struct device *parent = dev->bus->dev;
if (parent && parent->device == PCI_DEVICE_ID_TI_XIO2001)
pci_write_config8(parent, 0xd8, 0x0f);
}
/* Disable clock outputs 1-5 (CLKOUT) for another XIO2001 PCIe to PCI
* Bridge on this mainboard.
*/
dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0);
if (dev) {
struct device *parent = dev->bus->dev;
if (parent && parent->device == PCI_DEVICE_ID_TI_XIO2001)
pci_write_config8(parent, 0xd8, 0x3e);
}
}
static void wait_for_legacy_dev(void *unused)
{
uint32_t legacy_delay, us_since_boot;
struct stopwatch sw;
/* Open main hwinfo block. */
if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
return;
/* Get legacy delay parameter from hwinfo. */
if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
sizeof(legacy_delay)) != sizeof(legacy_delay))
return;
us_since_boot = get_us_since_boot();
/* No need to wait if the time since boot is already long enough.*/
if (us_since_boot > legacy_delay)
return;
stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
legacy_delay - us_since_boot, legacy_delay);
stopwatch_wait_until_expired(&sw);
printk(BIOS_NOTICE, "done!\n");
}
static void finalize_boot(void *unused)
{
/* Set coreboot ready LED. */
gpio_output(CNV_RGI_DT, 1);
}
BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL);
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL);
|
